Search Results

Universal Rear Bumper mounting brackets- raised. Sold in Pairs. * Laser cut from 12ga steel * 70mm overall length (can be trimmed by builder) * +5mm height offset (can be trimmed by builder) * 25mm mounting slot

Our Raised Prerunner Series Comp-Style SR5 /Honcho Trail Armor is specifically made for the best possible approach angle, which is why it is designed to be used with a chassis-mounted servo winch. A bumper-mounted winch (9.5cti or similar smaller winch) will fit on the bumper but will be tucked in behind the...

ScalerFab Welded Steel Prerunner Series Comp-Style Raised Front Bumper w/ Stinger for Axial SCX10/SCX10 II SR5/HonchoOur Raised Prerunner Series Comp-Style SR5 /Honcho Trail Armor is specifically made for the best possible approach angle, which is why it is designed to be used with a chassis-mounted servo winch. A bumper-mounted winch (9.5cti or...

Our Raised Comp-Style SR5 Trail Armor is specifically made for the best possible approach angle while still qualifying for your SORRCA scale points, which is why it only works with a chassis-mounted servo winch. For products that work with a bumper-mounted winch, see our Raised Narrow and Prerunner Series Bumpers. ScalerFab Welded...

ScalerFab Welded Steel Narrow Raised Front Bumper with Stinger for Axial SCX10 Honcho/Pro-Line SR5 **Some pictures may depict optional add-ons. Winch not included. Specifications:- Requires trimming of plastic bumper for Pro-Line SR5 Body- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware...

ScalerFab Welded Steel Pro Series Narrow Raised Front Bumper with Stinger for Axial SCX10 Honcho/Pro-Line SR5 Body(Optional Fairlead Mount Shown) **Some pictures may depict optional add-ons. Winch not included. Specifications:- 115mm wide- Requires trimming of plastic bumper for Pro-Line SR5 Body- Laser-cut Gussets added for strength and added scale appearance-...

ScalerFab Welded Steel Pro Series Narrow Raised Front Bumper with Trail Bar for Axial SCX10 Honcho/Pro-Line SR5 Body(Optional Fairlead Mount Shown) **Some pictures may depict optional add-ons. Winch not included. Specifications:- 115mm wide- Requires trimming of plastic bumper for Pro-Line SR5 Body- Laser-cut Gussets added for strength and added scale...

ScalerFab Welded Steel Prerunner Series Raised Front Bumper for Axial SCX10/SCX10 II SR5/Honcho/Power Wagon/ Nukizer Also fits the 4-Runner body WITHOUT the plastic front bumper. (Check width measurements and adjust in order notes, if needed) If leaving plastic front bumper, see the XJ Prerunner Series bumper. *Additional Options may be...

ScalerFab Welded Steel Narrow Raised Front Bumper with Trail Bar for Axial SCX10 Honcho/Pro-Line SR5(Optional Fairlead Mount Shown) **Some pictures may depict optional add-ons. Winch not included. Specifications:- Requires trimming of plastic bumper for Pro-Line SR5 Body- Mounts using existing holes in frame - does not mount like stock plastic bumper(s)...

ScalerFab's Builder Brackets take the guesswork out of fabbing your own bumpers. The SCX10 III Brackets/Adapter fit inside the c-channel frame rails. They do not mount to the outside of the frame rails like some of our other brackets. They come in a set of 2 and price includes FREE US SHIPPING....

Raised SCX10 Front Bumper mounting brackets. Sold in Pairs. Use this bracket to build your own OR for 2 additional mounting options to raise the stock plastic SCX10 Bumper to eliminate bumper/body gaps. Adjust the height an additional 10 or 20mm, depending on body style or desired look. **Additional Hardware needed...

RC Scale Steel Large Universal Basket-Style Roof Rack (shown on the Proline Jeep Rubicon Body) Specifications:* Pre-drilled for SCX10 Jeep Rubicon. May require drilling mounting holes on other bodies.*Same base as our low-profile roof rack, but with raised wrap-around border.*Plenty of room to mount lights front/rear with added protection of...

After market Chassis/Body? Not problem! We're trying out a new way for you to build the custom bumper to your specs using a base model of choosing what best fits your build. Comp-Style Bumper with Trail Bar or Stinger Choose width, height, and options below! Specifications: - 115mm wide w/ differing bracket widths-...

After market Chassis/Body? Not problem! We're trying out a new way for you to build the custom bumper to your specs using a base model of choosing what best fits your build. Comp-Style Bumper with Trail Bar or Stinger Choose width, height, and options below! Specifications: - Bumper fits tight to the frame...

ScalerFab's RC Scale Welded Steel Ultra Low-Profile Comp-Style Front Bumper for RC4WD C2X w/ Mohave Body. Specifications: - Approx. 82mm wide with 5mm raised brackets- Bumper fits tight to the frame for the best approach angle possible.- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer...

Our most low-profile bumper with the best possible approach angle is here for the Axial Adventure SCX10III Base Camp! RC Scale Welded Steel Ultra Low-Profile Comp-Style Front Bumper Specifications: - approx. 79mm wide (Just a bit wider than the frame rails)- Raised approx. 20mm above the top corner of the frame rails...

Fits the following bodies, and may fit others (bumper sits even with top of frame rails and offers some fore/aft adjustment): -Jeep Wrangler-Pro-Line SR5 (with the stock plastic bumper)-Pro-Line Jeep Wrangler-G6/Deadbolt-CRC Jeep Wrangler Unlimited-Pro-Line Racing 46 Power Wagon With over 50 possible combinations to choose from on this bumper, you...

Fits the following bodies, and may fit others (bumper sits even with top of frame rails and offers some fore/aft adjustment): -Jeep Wrangler-Pro-Line SR5 (with the stock plastic bumper)-Pro-Line Jeep Wrangler-G6/Deadbolt-CRC Jeep Wrangler Unlimited-Pro-Line Racing 46 Power Wagon With over 50 possible combinations on to choose from on this bumper,...

Steel, welded rear bumper for a SCX10/SCX10 II NuKizer. ***Body will need to be trimmed for custom fit. ***Some Photos depict optional Add-ons, which may be an additional cost. Engineered with precision and style, the Full-Width Rear Bumper for Axial SCX10/SCX10 II NuKizer offers unparalleled performance and a sleek, scale look. Dominate...

Our most popular series has made it to the RC4WD C2X! The Prerunner series was designed for a combination of looks and performance under scale use. Made from 3/16" rod, the Prerunner Front Bumper for the C2X is a low-profile, scale trail armor option. Full-size Steel, welded Prerunner Series Front Bumper for...