Vaterra Ascender Full-Size Front Bumper w/ Trail Bar

$53.95 USD

Shipping calculated at checkout

ScalerFab

Full-size Steel, welded front bumper for the Vaterra Ascender with Trail Bar. (SHOWN ON BRONCO BODY. FOR K5, K10 & F100, THE STYLE IS THE SAME W/ DIFFERENT MEASUREMENTS TO FIT THE DIFFERENT BODIES)
Specifications:
- 190-205mm wide, depending on body style (F100 will be raised approx. 15mm above the framerails)
- Mounts using existing holes in frame. Does not mount like stock bumper. Longer hardware recommended. (hardware not included)
- Steel construction
- Hand Made/Welded.
-K5 Blazer & Bronco Only- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and 8274 Winch, 3Racing Winch, and SSD Ox Power Winch mounting pattern)
**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below: -Flat Black: not as susceptible to chips -Rustoleum Truck Bed Coating: easier to touch up using a can of Rustoleum Truck Bed Coating, available at Home Depot or Lowes. -Raw Steel: We recommend a raw steel finish if you intend to coat with a harder finish on your own. Mountain instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits available at the top of the page as an optional add-on.**