1/12 ECX Barrage Comp-Style Front Bumper with Trail Bar

ScalerFab

With over 50 possible combinations on to choose from on this bumper, you can truly build the perfect piece of trail armor for your needs. If you weren't a competitor already, our Comp-Style Front Bumper w/ Trail Bar will allow you to push the limits of your Barrage without having to worry about approach angles.

Drive OVER the rocks, don't work around your bumper!

RC Scale Welded Steel 1/12 ECX Barrage Com-Style Front Bumper w/ Trail Bar.
**More options available on our website at www.scalerfab.com

Specifications:

- 75mm wide
- Bumper uses existing holes in frame when mounted all the way in (as pictured). In order for bumper to stick out further, drilling additional holes in frame rails may be necessary.
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below: -Flat Black: not as susceptible to chips -Rustoleum Truck Bed Coating: easier to touch up using a can of Rustoleum Truck Bed Coating, available at Home Depot or Lowes. -Raw Steel: We recommend a raw steel finish if you intend to coat with a harder finish on your own. Mountain instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits available at the top of the page as an optional add-on.**