PreRunner Series SCX10/SCX10 II XJ Rear Bumper

$59.95 USD

ScalerFab Welded Steel Prerunner Series Rear Bumper for Axial SCX10/ SCX10 2 XJ (Also fits on the Traxxas TRX4 Chassis with the XJ body)

Specifications:-
-207mm width with wrapped ends
- Adjustable mounting positions/depths - allows for better departure angle over stock
- Mounts using existing holes in frame and requires drilling (2) holes - does not mount like stock plastic bumper(s) - (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use.

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

Name: PreRunner Series SCX10/SCX10 II XJ Rear Bumper
Brand: SCX10
Price: 59.95 USD
Availability: InStock

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

PreRunner Series SCX10/SCX10 II XJ Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

SCX10 Deadbolt/G6 Rear Bumper

$44.95 USD

ScalerFab Welded Steel Rear Bumper for Axial SCX10 Deadbolt/G6.

Take your RC to the next level with the ScalerFab Deadbolt/G6 Rear Bumper! Increase your style and performance with one of our most popular items for this platform. Dominate on any terrain and stand out from the pack. Upgrade now and unleash your adventurous side!

Specifications:
-130mm width
- Mounts using existing holes in frame and requires drilling (2) holes or enlarging (2) existing holes for secure mounting (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Flat Black: not as susceptible to chips

-Raw Steel: We recommend a raw steel finish if you intend to coat with a harder finish on your own.

Mounting instructions:

We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

SCX10 Deadbolt/G6 Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Prerunner Series SCX10/SCX10 II Deadbolt/G6 Rear Bumper

$44.95 USD

ScalerFab Prerunner Series Welded Steel Rear Bumper for Axial SCX10/SCX10 II Deadbolt/G6.

Specifications:
-130mm width
- Mounts using existing holes in frame and requires drilling (2) holes or enlarging (2) existing holes for secure mounting (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below: -Flat Black: not as susceptible to chips -Rustoleum Truck Bed Coating: easier to touch up using a can of Rustoleum Truck Bed Coating, available at Home Depot or Lowes. Raw Steel: We recommend a raw steel finish if you intend to coat with a harder finish on your own.

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Prerunner Series SCX10/SCX10 II Deadbolt/G6 Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

SCX10 II XJ Cherokee Rear Bumper

$44.95 USD

ScalerFab Welded Steel Rear Bumper for Axial SCX10/ SCX10 2 Jeep XJ Cherokee

*Pictured with optional License Plate Recess

Inspire your adventurous side with the classic style of a ScalerFab Rear bumper for the SCX10 II XJ Rear Bumper. Made for the daring off-roader, this bumper adds a touch of ruggedness to your rig. With its timeless design, this bumper not only enhances the look of your vehicle but also provides extra protection on your thrilling journeys!

Specifications:-
-205mm width
- Adjustable mounting positions/depths - allows for better departure angle over stock
- Mounts using existing holes in frame and requires drilling (2) holes - does not mount like stock plastic bumper(s) - (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Flat Black: not as susceptible to chips

-Raw Steel: We recommend a raw steel finish if you intend to coat with a harder finish on your own.

Mounting instructions:
We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

SCX10 II XJ Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Steel Metal Rear Bumper with Stinger for Axial Wraith/Spawn

$47.95 USD

Welded Steel Rear Bumper for Axial Wraith Jeep Wrangler Poison Spyder or Spawn with Stinger

**Some pictures may depict optional add-ons.

Specifications:
- Mounts using existing holes and hardware (hardware not included)
- Steel construction - welded.
- Pre-drilled to accept RC4WD Warn 9.5cti winch - underside is accessible. WILL NOT FIT Warn 8274 winch.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below: -Flat Black: not as susceptible to chips -Rustoleum Truck Bed Coating: easier to touch up using a can of Rustoleum Truck Bed Coating, available at Home Depot or Lowes. Raw Steel: We recommend a raw steel finish if you intend to coat with a harder finish on your own.

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Wraith Rear Bumper w/ Stinger - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Rear Bumper for SCX10 Jeep Rubicon

$44.95 USD

ScalerFab Welded Steel Rear Bumper for Axial SCX10 Jeep Rubicon.

Upgrade your SCX10 Jeep Rubicon with our rear bumper, featuring classic jeep styling and tough Scalerfab armor for ultimate protection. Dominate any terrain with confidence and style.

Specifications:-
-190mm width
- Adjustable mounting positions/depths - allows for better departure angle over stock, or allows use of stock swing-out tire carrier ($5 upcharge for drilling/welding to accommodate stock tire rack)
- Mounts using existing holes in frame and requires drilling (2) holes - does not mount like stock plastic bumper(s) - (hardware not included)
- Steel construction - Hand Made/Welded.

* Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Flat Black: not as susceptible to chips

-Raw Steel: We recommend a raw steel finish if you intend to coat with a harder finish on your own.

Mounting instructions:
We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Rear Bumper for SCX10 Jeep Rubicon - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Full-Width Rear Bumper for Axial SCX10 Power Wagon

$48.95 USD

Steel Welded Rear Bumper for a Axial SCX10 Power Wagon.

***Body will need to be trimmed for custom fit. ***Some Photos depict optional Add-ons, which may be an additional cost.

Upgrade your RC with the best! The SCX10 Power Wagon Rear Bumper offers both scale appearance and top-notch performance. Don't settle for less - add some style and power to your RC today!

Specifications:
- 200mm wide
- Hand-welded, steel rear bumper made for SCX10 Power Wagon.
- Mounts using existing holes in frame and requires drilling (2) holes - does not mount like stock plastic bumper(s) - (hardware not included)
- Has slots for adjustable fore/aft mounting

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

Mounting instructions:
*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

SCX10 Power Wagon Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Full-Width Rear Bumper for Axial SCX10/SCX10 II NuKizer

$48.95 USD

Steel, welded rear bumper for a SCX10/SCX10 II NuKizer.

***Body will need to be trimmed for custom fit. ***Some Photos depict optional Add-ons, which may be an additional cost.

Engineered with precision and style, the Full-Width Rear Bumper for Axial SCX10/SCX10 II NuKizer offers unparalleled performance and a sleek, scale look. Dominate rugged terrain and conquer new challenges with this durable and dynamic upgrade. Take your adventures to the next level with this must-have accessory!

Specifications:

-170mm wide
- Standard Brackets, not raised
- Hand-welded, steel rear bumper made for SCX10 Nukizer.
- Mounts using existing holes in frame and requires drilling (2) holes - does not mount like stock plastic bumper(s) - (hardware not included)
- Has slots for adjustable fore/aft mounting

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below: -Flat Black: not as susceptible to chips -Rustoleum Truck Bed Coating: easier to touch up using a can of Rustoleum Truck Bed Coating, available at Home Depot or Lowes. Raw Steel: We recommend a raw steel finish if you intend to coat with a harder finish on your own.

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

SCX10/SCX10 II NuKizer Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

SCX10 Honcho Rear Bumper

$44.95 USD

ScalerFab Welded Steel Rear Bumper for Axial SCX10 Honcho.

Enhance the appearance and performance of your trail rig with this SCX10 Honcho Rear Bumper. This scale accessory adds a touch of ruggedness and style to your vehicle, surpassing the limitations of the stock bumper. Upgrade with confidence and achieve the ultimate off-road experience.

Specifications:
-130mm width (same as G6/Deadbolt Rear Bumper)
- Mounts using existing holes in frame and requires drilling (2) holes or enlarging (2) existing holes for secure mounting (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Flat Black: not as susceptible to chips

-Raw Steel: We recommend a raw steel finish if you intend to coat with a harder finish on your own.

Mounting instructions:
We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

SCX10 Honcho Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Steel Rear Bumper for Axial Wraith/Spawn

$42.95 USD

Welded Steel Rear Bumper for Axial Wraith Jeep Wrangler Poison Spyder or Spawn

Upgrade your ride with the Wraith Rear Bumper! Made of durable steel, this bumper adds a touch of style and maximum performance to your vehicle. Perfect for those who love a little extra flair in their off-roading adventures.

Specifications:
- Mounts using existing holes and hardware (hardware not included)
- Steel construction - welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Flat Black: not as susceptible to chips

-Raw Steel: We recommend a raw steel finish if you intend to coat with a harder finish on your own.

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Wraith Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

SCX10/SCX10 II Honcho "Barely There" Rear Bumper

$39.50 USD

ScalerFab Welded Steel Low-Profile Rear Bumper for Axial SCX10/SCX10 II Honcho.

Specifications:
- Slightly wider than the width of the frame rails. ~100mm
- Mounts using existing holes in frame and requires drilling (2) holes or enlarging (2) existing holes for secure mounting (hardware not included)
- 3/16" Steel rod construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

SCX10/SCX10 II Honcho "Barely There" Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Loved the quality and the fit would recommend it to anyone

Excellent fit and finish

I did the custom measurement. Bumpers fit perfectly on my G Speed V3 custom portal build. Already recommended to my buddies. I'll be ording a set of bumpers for my next build 👍

Great for if you don’t wanna have to fabricate your own bumpers or don’t have the time to. All in all good product and company. Would recommend.

Rear Bumper for Axial Racing SCX10 III Jeep Wrangler JLU

$49.95 USD

ScalerFab Welded Steel Rear Bumper for Axial SCX10III Jeep Wrangler JLU- License Plate or Hitch Receiver Options Available

The ScalerFab SCX10 III bumpers are designed to work with the stock Axial body post mounting system. Bumpers will not mount with any after-market crossmembers or anything that would interfere with the end of the frame rails.

Specifications:

- Approx. 190mm wide
- Includes mounting hardware (4 button-head screws, 4 nuts, & 4 washers)
- Steel construction - Hand Made/Welded.

Mounting Instructions:

-Bumpers mounts to outside of frame rails, between the plastic fenders and the frame rails.

-Requires drilling one (1) additional hole in plastic fender in order to use both existing holes in frame.

**For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Rear Bumper for Axial Racing SCX10 III Jeep Wrangler JLU - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Rear Bumper For Axial Racing SCX10 III Jeep Gladiator

$49.95 USD

ScalerFab Welded Steel Rear Bumper for Axial SCX10III Jeep Gladiator

License Plate or Hitch Receiver Options Available

Level up your RC jeep with some sweet armor - because let's be real, protection is crucial. And we've got your back (literally).

The ScalerFab SCX10 III bumpers are designed to work with the stock Axial body post mounting system. Bumpers will not mount with any after-market crossmembers or anything that would interfere with the end of the frame rails.

Specifications:

- Approx. 190mm wide
- Includes mounting hardware (4 button-head screws, 4 nuts, & 4 washers)
- Steel construction - Hand Made/Welded.

Mounting Instructions:

-Bumpers mounts to outside of frame rails, between the plastic fenders and the frame rails.

-Requires drilling one (1) additional hole in plastic fender in order to use both existing holes in frame.

**For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Rear Bumper For Axial Racing SCX10 III Jeep Gladiator - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Retro Series Axial SCX10 III Bronco Rear Bumper

$59.95 USD

The Retro Series features double tube work for that classic, old-school look! Pairs perfectly with the Retro Series Front Bumper HERE

ScalerFab Welded Steel Prerunner Series Rear Bumper for Axial SCX10 III Bronco

Specifications:-
- 215mm Wide
- Requires drilling one (1) additional hole in plastic fender in order to use both existing holes in frame.
- Longer Mounting Hardware Included (4 button head screws, 4 washers, 4 nuts).
- Steel construction - Hand Made/Welded.

**For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: not as susceptible to chips

-Rustoleum Truck Bed Coating: easier to touch up using a can of Rustoleum Truck Bed Coating, available here: link text

Mounting Instructions:

-Bumpers mounts to outside of frame rails, between the plastic fenders and the frame rails.

-Requires drilling one (1) additional hole in plastic fender in order to use both existing holes in frame.

**For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Retro Series Axial SCX10 III Bronco Rear Bumper

Prerunner Series Axial SCX10 III Base Camp Rear Bumper

$59.95 USD

MOST POPULAR SERIES!

The Prerunner series was designed for a combination of looks and performance under scale use and it a perfect fit for the Axial SCX10 III Base Camp! The tube work wraps the body perfectly for an ultra scale look coupled with a bit of body protection.

Full-width Steel, welded Prerunner Series Rear Bumper for the Axial Adventure SCX10III Base Camp

Specifications:-
- Approx. 200mm wide with wrapped ends.
- Longer Mounting Hardware Included (4 button head screws, 4 washers, 4 nuts).
- Steel construction - Hand Made/Welded.

**For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use.

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own.

-Flat Black: matte black finish.

-Rustoleum Truck Bed Coating: OUT OF STOCK, no longer available.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Prerunner Series Axial SCX10 III Base Camp Rear Bumper

Amazing bumper.

Great rear bumper! Looks absolutely stunning on the basecamp. Only issue is the gap from the frame rails to the tabs. Once tightened down, it was fine.

Awesome

Fit right on look amazing with the body I went with. Very happy with your product.

Rear Bumper For Axial Racing SCX10 III Base Camp

$49.95 USD

ScalerFab Full-Width Welded Steel Rear Bumper for the Axial SCX10III Base Camp

Add a little scale to your RC! This classic style bumper offers a series of customized options. Add a license plate recess or hitch receiver for an ultra scale appearance.

Specifications:

- Approx. 200mm wide
- Includes mounting hardware (4 button-head screws, 4 nuts, & 4 washers)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Flat Black: not as susceptible to chips

Raw Steel: We recommend a raw steel finish if you intend to coat with a harder finish on your own.

Mounting instructions:

We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

**For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Rear Bumper For Axial Racing SCX10 III Base Camp

Rear Bumper for Axial SCX10 III Jeep CJ-7

$54.95 USD

ScalerFab Rear Bumper for Axial SCX10III Jeep CJ-7

Experience the ultimate in scale appearance with our Rear Bumper for the Axial Jeep CJ-7. Made from strong metal, this bumper not only looks like the real thing, but also offers added durability and protection for your RC vehicle. Customize your bumper even further with optional add ons like the tire carrier. Upgrade your RC experience today!

The ScalerFab SCX10 III bumpers are designed to work with the stock Axial CJ-7 body post mounting system. Rear bumper includes body posts that fit into the mount on the body.

Specifications:

- Approx. 190mm wide
-Mounts using existing holes in frame rails. Washer and nut recommended- see mounting instructions below.
- Steel construction - Hand Made/Welded.

Mounting Instructions:

-Bumpers mounts to outside of frame rails, between the plastic fenders and the frame rails.

**For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Lifetime Warranty Info

ScalerFab Welded Steel Rear Bumper for Axial SCX10 Deadbolt/G6.

Lifetime Warranty Info

Lifetime Warranty Info

ScalerFab Welded Steel Rear Bumper for Axial SCX10/ SCX10 2 Jeep XJ Cherokee

Lifetime Warranty Info

Welded Steel Rear Bumper for Axial Wraith Jeep Wrangler Poison Spyder or Spawn with Stinger

Lifetime Warranty Info

ScalerFab Welded Steel Rear Bumper for Axial SCX10 Jeep Rubicon.

Upgrade your SCX10 Jeep Rubicon with our rear bumper, featuring classic jeep styling and tough Scalerfab armor for ultimate protection. Dominate any terrain with confidence and style.

Lifetime Warranty Info

Steel Welded Rear Bumper for a Axial SCX10 Power Wagon.

Upgrade your RC with the best! The SCX10 Power Wagon Rear Bumper offers both scale appearance and top-notch performance. Don't settle for less - add some style and power to your RC today!

Lifetime Warranty Info

Steel, welded rear bumper for a SCX10/SCX10 II NuKizer.

Lifetime Warranty Info

ScalerFab Welded Steel Rear Bumper for Axial SCX10 Honcho.

Enhance the appearance and performance of your trail rig with this SCX10 Honcho Rear Bumper. This scale accessory adds a touch of ruggedness and style to your vehicle, surpassing the limitations of the stock bumper. Upgrade with confidence and achieve the ultimate off-road experience.

Lifetime Warranty Info

Welded Steel Rear Bumper for Axial Wraith Jeep Wrangler Poison Spyder or Spawn

Upgrade your ride with the Wraith Rear Bumper! Made of durable steel, this bumper adds a touch of style and maximum performance to your vehicle. Perfect for those who love a little extra flair in their off-roading adventures.

Lifetime Warranty Info

Lifetime Warranty Info

Customer Reviews

Lifetime Warranty Info

ScalerFab Welded Steel Rear Bumper for Axial SCX10III Jeep Gladiator

Level up your RC jeep with some sweet armor - because let's be real, protection is crucial. And we've got your back (literally).

Lifetime Warranty Info

Customer Reviews

Lifetime Warranty Info

Customer Reviews

Lifetime Warranty Info

Customer Reviews

ScalerFab Full-Width Welded Steel Rear Bumper for the Axial SCX10III Base Camp

Lifetime Warranty Info

ScalerFab Rear Bumper for Axial SCX10III Jeep CJ-7

Lifetime Warranty Info

Customer Reviews

Promos

DIY Bungee Cord Tutorial

Collaborate with Us!