Tu viaje, tu armadura
Transforme sus aventuras de R/C con los parachoques metálicos y deslizadores de roca personalizados de ScalerFab: diseñados para una DURABILIDAD y ESTILO inigualables, soldados a mano en nuestro taller todoterreno a escala ubicado en el corazón de Colorado.
Nuestros accesorios fabricados con precisión, diseñados para su modelo RC específico a escala 1/10, prometen mejorar su experiencia todoterreno. Ya sea conquistando terrenos difíciles o destacando con estilo, ScalerFab es su socio en la creación de un viaje R/C incomparable.
productos populares
TodosMetal Replica Winch Front Bumper for Axial Adventure SCX10 III Jeep CJ-7
Precio habitual $62.95 USDScalerFab Welded Steel Replica Winch Front Bumper for Axial SCX10III Jeep CJ-7
Trail Bar & Stinger options available.
Expertly crafted metal front bumper designed specifically for Axial Adventure's SCX10 III Jeep CJ-7. Made with durable metal for a realistic scale appearance and unbeatable performance. Provides the lowest approach angle while still allowing for a bumper-mounted winch.
The ScalerFab SCX10 III CJ-7 bumpers are designed to work with the stock CJ-7 body post mounting system and includes post mounts build into the bumper. Bumpers will not mount with any after-market crossmembers or anything that would interfere with the end of the frame rails.
Specifications:
- 80mm wide
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel and mounts using existing holes in frame.
- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and 8274 Winch, 3Racing Winch, and SSD Ox Power Winch mounting pattern)
- Steel construction - Hand Made/Welded.
- No fore/aft adjustment
TO MOUNT WINCH: You will need to flip the winch mounting plate in order to install on bumper.
Mounting Instructions:
1. Bumper is made to slide inside the c-channel of the frame rails.
2. Mount by matching holes in the body post mount with holes in the brackets and frame rails, as shown below.
3. Back screws with a washer and nut.
ScalerFab Welded Steel Replica Non-Winch Front Bumper for Axial SCX10III Jeep CJ-7 Trail Bar & Stinger options available.
*This bumper does NOT fit a winch. Click for Winch Bumper For CJ-7.
Expertly crafted metal front bumper designed specifically for Axial Adventure's SCX10 III Jeep CJ-7. Made with durable metal for a realistic scale appearance and unbeatable performance. Provides the lowest approach angle without sacrificing strength. Don't worry about running a winch - this bumper is designed for maximum performance.
The ScalerFab SCX10 III CJ-7 bumpers are designed to work with the stock CJ-7 body post mounting system and includes post mounts build into the bumper. Bumpers will not mount with any after-market crossmembers or anything that would interfere with the end of the frame rails.
Specifications:
- 80mm wide
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel and mounts using existing holes in frame.
- Steel construction - Hand Made/Welded.
- No fore/aft adjustment
Mounting Instructions:
1. Bumper is made to slide inside the c-channel of the frame rails.
2. Mount by matching holes in the body post mount with holes in the brackets and frame rails, as shown below.
3. Back screws with a washer and nut.
Información de garantía de por vida
ScalerFab ofrece una garantía de por vida en todos nuestros Trail Armor. Ofrecemos garantía contra rotura y flexión de parachoques, deslizadores de rocas, portaequipajes, enganches, etc.
Si tiene un problema con su artículo, deje información detallada a continuación o puede enviarla por correo.
Los artículos para reparación/reemplazo en garantía deben enviarse por correo a:
ScalerFab, Inc.
Apartado postal 130
Dividir, CO 80814
Los reemplazos y/o reembolsos generalmente se procesan dentro de 5 a 7 días hábiles luego de la recepción del artículo. (La dirección se reserva todos los derechos)
Metal Replica Non-Winch Front Bumper for Axial Adventure SCX10 III Jeep CJ-7
Precio habitual $57.95 USDScalerFab Welded Steel Replica Non-Winch Front Bumper for Axial SCX10III Jeep CJ-7 Trail Bar & Stinger options available.
*This bumper does NOT fit a winch. Click for Winch Bumper For CJ-7.
Expertly crafted metal front bumper designed specifically for Axial Adventure's SCX10 III Jeep CJ-7. Made with durable metal for a realistic scale appearance and unbeatable performance. Provides the lowest approach angle without sacrificing strength. Don't worry about running a winch - this bumper is designed for maximum performance.
The ScalerFab SCX10 III CJ-7 bumpers are designed to work with the stock CJ-7 body post mounting system and includes post mounts build into the bumper. Bumpers will not mount with any after-market crossmembers or anything that would interfere with the end of the frame rails.
Specifications:
- 80mm wide
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel and mounts using existing holes in frame.
- Steel construction - Hand Made/Welded.
- No fore/aft adjustment
Mounting Instructions:
1. Bumper is made to slide inside the c-channel of the frame rails.
2. Mount by matching holes in the body post mount with holes in the brackets and frame rails, as shown below.
3. Back screws with a washer and nut.
Información de garantía de por vida
ScalerFab ofrece una garantía de por vida en todos nuestros Trail Armor. Ofrecemos garantía contra rotura y flexión de parachoques, deslizadores de rocas, portaequipajes, enganches, etc.
Si tiene un problema con su artículo, deje información detallada a continuación o puede enviarla por correo.
Los artículos para reparación/reemplazo en garantía deben enviarse por correo a:
ScalerFab, Inc.
Apartado postal 130
Dividir, CO 80814
Los reemplazos y/o reembolsos generalmente se procesan dentro de 5 a 7 días hábiles luego de la recepción del artículo. (La dirección se reserva todos los derechos)
Recien agregado
Parachoques del chasis Axial SCX10 Pro 4WD
Todo nuevo para el chasis SCX10 Pro: parachoques delantero estrecho (ver también con refuerzos de la serie Pro). ¡Busque "Pro Chassis" ahora para comprar!
Compra ahora
A partir de
$35.00 USD
¡Consigue el tuyo!
Camiseta RC Life
Sumérgete en la "vida RC" con esta divertida y cómoda camiseta de tres mezclas de ScalerFab. Advertencia: Puede provocar ganas repentinas de jugar con coches pequeños. 🚗💨#SuperSoftVroomVroomClothing
Compra ahora
A partir de
$27.37 USD
No confíe simplemente en nuestra palabra...
Comprar por tipo de producto
Vea cómo se hace
Entra en la tienda ScalerFab
¡Eche un vistazo al interior de ScalerFab Welding Shop en Facebook y Youtube!