189 artículos
Metal Replica Winch Front Bumper for Axial Adventure SCX10 III Jeep CJ-7
Precio habitual $62.95 USDScalerFab Welded Steel Replica Winch Front Bumper for Axial SCX10III Jeep CJ-7
Trail Bar & Stinger options available.
Expertly crafted metal front bumper designed specifically for Axial Adventure's SCX10 III Jeep CJ-7. Made with durable metal for a realistic scale appearance and unbeatable performance. Provides the lowest approach angle while still allowing for a bumper-mounted winch.
The ScalerFab SCX10 III CJ-7 bumpers are designed to work with the stock CJ-7 body post mounting system and includes post mounts build into the bumper. Bumpers will not mount with any after-market crossmembers or anything that would interfere with the end of the frame rails.
Specifications:
- 80mm wide
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel and mounts using existing holes in frame.
- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and 8274 Winch, 3Racing Winch, and SSD Ox Power Winch mounting pattern)
- Steel construction - Hand Made/Welded.
- No fore/aft adjustment
TO MOUNT WINCH: You will need to flip the winch mounting plate in order to install on bumper.
Mounting Instructions:
1. Bumper is made to slide inside the c-channel of the frame rails.
2. Mount by matching holes in the body post mount with holes in the brackets and frame rails, as shown below.
3. Back screws with a washer and nut.
ScalerFab Welded Steel Replica Non-Winch Front Bumper for Axial SCX10III Jeep CJ-7 Trail Bar & Stinger options available.
*This bumper does NOT fit a winch. Click for Winch Bumper For CJ-7.
Expertly crafted metal front bumper designed specifically for Axial Adventure's SCX10 III Jeep CJ-7. Made with durable metal for a realistic scale appearance and unbeatable performance. Provides the lowest approach angle without sacrificing strength. Don't worry about running a winch - this bumper is designed for maximum performance.
The ScalerFab SCX10 III CJ-7 bumpers are designed to work with the stock CJ-7 body post mounting system and includes post mounts build into the bumper. Bumpers will not mount with any after-market crossmembers or anything that would interfere with the end of the frame rails.
Specifications:
- 80mm wide
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel and mounts using existing holes in frame.
- Steel construction - Hand Made/Welded.
- No fore/aft adjustment
Mounting Instructions:
1. Bumper is made to slide inside the c-channel of the frame rails.
2. Mount by matching holes in the body post mount with holes in the brackets and frame rails, as shown below.
3. Back screws with a washer and nut.
Información de garantía de por vida
ScalerFab ofrece una garantía de por vida en todos nuestros Trail Armor. Ofrecemos garantía contra rotura y flexión de parachoques, deslizadores de rocas, portaequipajes, enganches, etc.
Si tiene un problema con su artículo, deje información detallada a continuación o puede enviarla por correo.
Los artículos para reparación/reemplazo en garantía deben enviarse por correo a:
ScalerFab, Inc.
Apartado postal 130
Dividir, CO 80814
Los reemplazos y/o reembolsos generalmente se procesan dentro de 5 a 7 días hábiles luego de la recepción del artículo. (La dirección se reserva todos los derechos)
Metal Replica Non-Winch Front Bumper for Axial Adventure SCX10 III Jeep CJ-7
Precio habitual $57.95 USDScalerFab Welded Steel Replica Non-Winch Front Bumper for Axial SCX10III Jeep CJ-7 Trail Bar & Stinger options available.
*This bumper does NOT fit a winch. Click for Winch Bumper For CJ-7.
Expertly crafted metal front bumper designed specifically for Axial Adventure's SCX10 III Jeep CJ-7. Made with durable metal for a realistic scale appearance and unbeatable performance. Provides the lowest approach angle without sacrificing strength. Don't worry about running a winch - this bumper is designed for maximum performance.
The ScalerFab SCX10 III CJ-7 bumpers are designed to work with the stock CJ-7 body post mounting system and includes post mounts build into the bumper. Bumpers will not mount with any after-market crossmembers or anything that would interfere with the end of the frame rails.
Specifications:
- 80mm wide
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel and mounts using existing holes in frame.
- Steel construction - Hand Made/Welded.
- No fore/aft adjustment
Mounting Instructions:
1. Bumper is made to slide inside the c-channel of the frame rails.
2. Mount by matching holes in the body post mount with holes in the brackets and frame rails, as shown below.
3. Back screws with a washer and nut.
Información de garantía de por vida
ScalerFab ofrece una garantía de por vida en todos nuestros Trail Armor. Ofrecemos garantía contra rotura y flexión de parachoques, deslizadores de rocas, portaequipajes, enganches, etc.
Si tiene un problema con su artículo, deje información detallada a continuación o puede enviarla por correo.
Los artículos para reparación/reemplazo en garantía deben enviarse por correo a:
ScalerFab, Inc.
Apartado postal 130
Dividir, CO 80814
Los reemplazos y/o reembolsos generalmente se procesan dentro de 5 a 7 días hábiles luego de la recepción del artículo. (La dirección se reserva todos los derechos)
