Search Results
Category
Vendor
Product Type
Tags
| Image | SKU | Title | Short Description | Price |
|---|---|---|---|---|
|
SF10679 | Comp-Style Element RC Enduro Sendero/HD/Trailwalker Front Bumper | Fits the following bodies, and may fit others (bumper sits even with top of frame rails and offers some fore/aft adjustment): -Enduro Sendero/Sendero HD-Enduro Trailwalker-Pro-Line Racing 46 Power Wagon Push all the way in for an ultra low-profile bull-bar look, or adjust out to fit a bumper mounted winch! (does not... | From $51.95 USD |
|
SF10697 | Element RC Enduro Sendero/Sendero HD Cab-Only Rock Sliders | Element RC Enduro Sendero/Sendero HD Cab-Only Rock SlidersSteel Frame-mounted Rock Sliders w/ Optional Add-Ons (Shown in pictures) This set is specifically for only using the cab portion of the Enduro Sendero. Will be shorter in the rear than our regular Sendero Rock Sliders to only cover the length of the... | From $44.95 USD |
|
SF10721 | Element RC Enduro Rock Sliders | Element RC Enduro Sendero/Trailwalker Rock SlidersSteel Frame-mounted Rock Sliders w/ Optional Add-Ons (Shown in pictures) take the place of the stock plastic skid plates. The receiver box and ESC will either need to be relocated or attached to our skid plates option, which we highly recommend. ALL NEW Body Capture... | From $44.95 USD |
|
SF10913 | 1/10 Scale Full-Width Front Bumper for Traxxas TRX4 Sport | Full-Size Steel, Welded Front Bumper For The Traxxas TRX4 Sport Specifications:-190mm wide-Bumper Top Plate sites approx. 20mm above the top of the frame rail.**REQUIRES Trimming of body for fitment. Bumper is not made to fit a winch, but does have pre-drilled holes due to the laser cut top plate that is... | From $55.95 USD |
|
SF11355 | Pro-Line SR5 Roll Bar | Protect your rig and look cool doing it! This is the brand new, just released ScalerFab Pro-Line SR5 Body Roll Bar. Simple, yet strong and full of SCALE! ScalerFab Pro-Line SR5 Roll Bar *Pictures depict option Light Tabs Add-On Specifications:-Hand-welded steel 3/16 rod-Mounts by drilling 4 holes into truck bed, hardware... | From $36.45 USD |
|
000010 | 90° Gussets (10-Pack) * | Steel 90° Gussets (10-Pack) gus·setˈɡəsət/nounnoun: gusset; plural noun: gussetsDef: A bracket strengthening an angle of a structure. *10-pack *Laser-cut out of 16 gauge mild steel*30mm x 19mm | $14.45 USD |
|
SF11663 | Comp-Style Bull-Bar Front Bumper for the Traxxas TRX4 D90 | Fits the following bodies, and may fit others (bumper sits even with top of frame rails and offers some fore/aft adjustment): -TRX D90-Pro-Line Racing 46 Power Wagon With multiple possible combinations to choose from on this bumper, you can truly build the perfect piece of trail armor for your needs.... | From $51.95 USD |
|
SF11771 | 1/10 Scale Full-Width Front Bumper w/ Stinger for Traxxas TRX4 D90 | Full-size Steel, welded front bumper w/ Stinger for the Traxxas TRX4 Defender 90*Pictures depict optional add-ons Specifications:-205mm wide- Brackets specifically for TRX4- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories)- Steel... | From $60.95 USD |
|
SF13151 | G-Made Sawback Front Bumper with Trail Bar | Front Bumper with Trail Bar for the G-Made Sawback Specifications: - 115mm wide, Class 1 option is 167mm wide- Mounts using existing hardware.- Steel construction - Hand Made/Welded.- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and 8274 Winch, 3Racing Winch, and SSD Ox Power Winch mounting pattern) **Please Note: Our finish... | From $51.95 USD |
|
SF13245 | Stinger Add-On Option | $15.95 USD | |
|
|
SF13244 | Trail Bar Add-On Option | $15.95 USD | |
|
|
SF13246 | Prerunner Series Rear Bumper Add-On Option | **Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below: -Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with... | $35.00 USD |
|
SF411000 | Aluminum Sand Ramps | Add scale points to your rig, not weight! These super light ScalerFab Aluminum Sand Ramps will get you over obstacles without weighing down you rig. Need I say more? Aluminum Sand Ramps *Approximately 2" x 6" | $17.95 USD |
|
SF409036 | Heavy-Duty Land Anchor w/ Hook | ScalerFab RC Scale Heavy-Duty Land Anchor w/ Hook ***THIS IS NOT A FULL-SIZE ITEM! This is for a 1:10 scale rc (radio controlled) vehicle! Do not order for your full size vehicle. See measurements below. Laser-cut, hand welded w/ shovel front and an added hook on the back side for additional connection... | $35.00 USD |
|
SF13454 | G-Made Sawback Rear Bumper w/ Tire Carrier and Jerry Can Mount | Full-size Steel, welded rear bumper for the G-Made Sawback w/ Tire Carrier and Jerry Can Mount Specifications: *Note: pictures mounted on vehicle show an older version with the shackle mounts on the back of the bumper. Please see updated pictures of shackle mounts welded below bumper for best departure angle.... | From $60.95 USD |
|
SF310040 | G-Made Sawback 4-pt. Roll Bar | G-Made Sawback 4-pt. Roll BarSteel roll bar for G-made Sawback. Mounts onto body. Great for light use. ***We recommend the steel backing plates add-on for medium to heavy use to prevent body damage when rolled. -3/16" solid steel -Hand welded **Requires drilling 4 holes in body. Hardware included. | $36.45 USD |
|
SF13596 | Element RC Enduro Knightrunner Trail Truck Narrow Front Bumper | ScalerFab Welded Steel Narrow Front Bumper for Element RC Enduro Knightrunner Trail Truck Sits even with the top of the frame rails. **Some pictures may depict optional add-ons. Winch not included. Specifications: - 115mm wide- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and 8274 Winch, 3Racing Winch, and SSD... | From $44.95 USD |
|
00127 | Heavy-Duty Hybrid Land Anchor | ScalerFab RC Scale Heavy-Duty Hybrid Land Anchor ***THIS IS NOT A FULL-SIZE ITEM! This is for a 1:10 scale rc (radio controlled) vehicle! Do not order for your full size vehicle. See measurements below. Laser-cut, hand welded w/ main shovel and added harpoon-style hook on back-bone. Finished in Rustoleum Truck Bed Coating... | $35.00 USD |
|
SF11406 | Redcat Everest Gen7/Pro 1/10 Scale Full-Width Front Bumper with Trail Bar | Ditch the bulk and boost performance with this ScalerFab Full-Size Front Bumper for the Redcat Everest Gen7 or Gen7 Pro! Full-size Steel, welded full-size front bumper for Redcat Everest Gen7/ Gen7 Pro**Some Pictures may depict Optional Add-Ons Specifications:- 190mm wide- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and... | From $60.95 USD |
|
Retro Series Vanquish VS4-10 Phoenix Rear Bumper | The Retro Series features double tube work for that classic, old-school look! ScalerFab Welded Steel Prerunner Series Rear Bumper for Vanquish VS4-10 Phoenix Specifications:-- Adjustable mounting positions/depths - allows for better departure angle.- Mounts using existing holes in frame- (hardware not included)- Steel construction - Hand Made/Welded. **Please Note: Our finish options... | From $59.95 USD |
