Search Results

Universal Rear Bumper mounting brackets. Sold in Pairs. * Laser cut from 14ga steel * 70mm overall length (can be trimmed by builder) * 25mm mounting slot

Wraith Rock SlidersSteel Frame-mounted Rock Sliders for Axial Wraith w/ Optional Add-Ons Specifications:* Mounts using existing holes in frame- see photos * Steel construction - Hand Made/Welded. **Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below: -Raw Steel: We recommend...

Wraith Rock Sliders with Skid PlatesSteel Frame-mounted Rock Sliders for Axial Wraith. * Mounts using existing holes in frame- see photos * Steel construction - Hand Made/Welded. **Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below: -Raw Steel: We recommend a raw...

Vaterra Ascender Standard Rock SlidersSteel Frame-mounted Standard Rock Sliders for Vaterra Ascender. *120-160mm length, depending on Body (K10, 1972 Bronco & F100 will be slightly angled up to match body line, K5 is straight out) *No need to remove stock battery tray- can be mounted with sliders using spacers and...

Full-size Steel, welded front bumper for the SCX10/SCX10 II Power Wagon, Honcho, and Nukizer Specifications:-190mm wide-Bumper Top Plate sites approx. 20mm above the top of the frame rail.- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper...

ScalerFab Welded Steel Narrow Raised Front Bumper with Trail Bar for Axial SCX10 Honcho/Pro-Line SR5(Optional Fairlead Mount Shown) **Some pictures may depict optional add-ons. Winch not included. Specifications:- Requires trimming of plastic bumper for Pro-Line SR5 Body- Mounts using existing holes in frame - does not mount like stock plastic bumper(s)...

Laser-cut mounting brackets with built-in Front/Rear Link Riser Mount Universale fit for SCX10/SCX10 II, Element RC, Traxxas TRX4 & gen 7/8/ (with the link riser mounts removed), Vaterra Ascender, G-Made Sawback, and ECX Barrage. Also use for custom chassis, or custom cage builds. Sold in pairs. * Built-in Front & Rear...

ScalerFab Welded Steel Narrow Front Bumperw/ Stinger for Axial SCX10/SCX10 II Jeep Rubicon, CRC Wrangler Unlimited, Deadbolt/G6, etc. Sits even with the top of the frame rails. For RAISED brackets (+20mm above top of frame rails), see our selection HERE **Some pictures may depict optional add-ons. Winch not included. Specifications:...

Laser-Cut rock slider, custom chassis, and custom cage mounting brackets for Vaterra Ascender. Sold in Pairs. * 100mm x 12mm * Ascender skid plate bolt pattern w/ tab to retain stock battery tray (additional hardware and spacers may be required- not included)

Universal Rear Bumper mounting brackets- raised. Sold in Pairs. * Laser cut from 12ga steel * 70mm overall length (can be trimmed by builder) * +5mm height offset (can be trimmed by builder) * 25mm mounting slot

ScalerFab Welded Steel Rear Bumper for Axial SCX10 Deadbolt/G6. Take your RC to the next level with the ScalerFab Deadbolt/G6 Rear Bumper! Increase your style and performance with one of our most popular items for this platform. Dominate on any terrain and stand out from the pack. Upgrade now and...

RR10 Bomber Rock Sliders with Skids Steel Frame-mounted Rock Sliders for Axial RR10 Bomber. * Mounts using existing hardware and existing holes in frame (hardware not included). * Steel construction - Hand Made/Welded. INSTALL INSTRUCTIONS CAN BE FOUND HERE or watch the video below: **Please Note: Our finish options provide a superficial coating and...

ScalerFab Welded Steel Pro Series Narrow Raised Front Bumper with Trail Bar for Axial SCX10 Honcho/Pro-Line SR5 Body(Optional Fairlead Mount Shown) **Some pictures may depict optional add-ons. Winch not included. Specifications:- 115mm wide- Requires trimming of plastic bumper for Pro-Line SR5 Body- Laser-cut Gussets added for strength and added scale...

Universal hitch/bumper mounting brackets. Sold in Pairs.* Laser cut from 16ga steel* +/- 25mm height offset (up/down, depending upon orientation- can be trimmed by builder) * 17mm mounting slot

Universal Fairlead Mount. * Laser cut from 16ga steel * 30mm x 85mm generic plate (can be trimmed by builder) * 31.5mm bolt pattern (same as RC4WD WARN 9.5cti winch)

ScalerFab Welded Steel Rear Bumper for Axial SCX10 Honcho. Enhance the appearance and performance of your trail rig with this SCX10 Honcho Rear Bumper. This scale accessory adds a touch of ruggedness and style to your vehicle, surpassing the limitations of the stock bumper. Upgrade with confidence and achieve the ultimate...

Toughen up and go full-throttle with the ScalerFab Bomber Front Bumper. The solid steel construction, backed by a lifetime warranty, means you can go beyond the trail with confidence! RR10 Bomber Front Bumper w/ Stinger **Some pictures may depict optional add-ons. * Mounts using existing holes and hardware (hardware not included). Will...

SCX10/ SCX10 2 Rock SlidersSteel Frame-mounted Rock Sliders w/ Optional Add-Ons Specifications:* 155mm-177mm (depending on body/tire size) Custom sizes available- enter in Options -*NOTE: 177mm length - Fits 1.9 stock tires on stock wheels, others may not fit.* Built in front and rear link riser mounts* Mounts using existing holes in frame...

Full-size Steel, welded Prerunner Series Front Bumper for the SCX10/ SCX10 2 XJ Body- (Also fits on the Traxxas TRX4 Chassis with the XJ body) ALSO FITS THE PRO-LINE 4-Runner body WITH the plastic front bumper. If removing plastic front bumper, see the Honcho Raised Prerunner Series bumper and add custom...

ScalerFab Welded Steel Narrow Front Bumper w/ Trail Bar for Axial SCX10/SCX10 II Jeep Rubicon, CRC Wrangler Unlimited, Deadbolt/G6, etc. Sits even with the top of the frame rails. For RAISED brackets (+20mm above top of frame rails), see our selection HERE **Some pictures may depict optional add-ons. Winch not...