Search Results
Category
Vendor
Product Type
Tags
| Image | SKU | Title | Short Description | Price |
|---|---|---|---|---|
|
SF10111 | Retro Series SCX10 III Bronco Front Bumper | Our popular Retro Series is here for the Axial SCX10 III Bronco! This is the perfect mix of scale and throwback, with double tube work for that classic, old-school look! Pairs perfectly with the Retro Series Rear Bumper. Full-size Steel, welded Retro Series Front Bumper for the Axial SCX10 III... | From $76.45 USD |
|
SF13331 | SCX10 1/10 Scale Full-Width Power Wagon/Honcho/NuKizer Front Bumper with Stinger | Full-size Steel, welded front bumper for a SCX10/SCX10 II Power Wagon, Honcho, and Nukizer ***Body will need to be trimmed for custom fit. Specifications: -190mm wide-Bumper Top Plate sites approx. 20mm above the top of the frame rail.- Mounts using existing holes in frame - does not mount like stock plastic bumper(s)... | From $60.95 USD |
|
SF11280 | Redcat Everest Gen7/Gen7Pro Scale Front Bumper w/ Stinger | Full-size Steel, welded front bumper w/ Stinger for the Redcat Everest Gen 7/ Gen 7 Pro*Pictures depict optional add-ons Specifications:-190mm wide- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and SSD Ox Power Winch mounting pattern)- Mounts using existing hardware- Steel construction - Hand Made/Welded. **Please Note: Our finish options provide... | From $58.95 USD |
|
SF13313 | SCX10 1/10 Scale Full-Width Power Wagon/Honcho/NuKizer Front Bumper with Trail Bar | Full-size Steel, welded front bumper for a SCX10/SCX10 II Power Wagon, Honcho, and Nukizer***Body will need to be trimmed for custom fit.**Some Pictures may depict Optional Add-Ons Specifications:- 190mm wide- Bumper Top Plate sites approx. 20mm above the top of the frame rail.- Mounts using existing holes in frame - does not... | From $60.95 USD |
|
SF502211 | Replica 1/10 Scale Full-Width Front Bumper for Traxxas TRX4 D90 | Replica Full-size Steel, welded front bumper for the Traxxas TRX4 Defender with Trail Bar, Top Fairlead Mount and Shackle Mounts Adjustable Mounting Options: -Mount with stock body post location by cutting 2 small slits in the body to accommodate the mounting brackets (see picture) -Mount with body posts 1 hole higher (5mm)... | $77.95 USD |
|
1000 | SCX10 Front Bumper Brackets (2) * | SCX10 Front Bumper mounting brackets. Sold in Pairs. * Laser cut from 14ga steel * 7mm fore/aft adjustable mounting slots * 0mm height offset (sits even with top of frame rails) | $17.45 USD |
|
SF11388 | Redcat Everest Gen7/Gen7 Pro Standard Rear Bumper | ScalerFab Welded Steel Rear Bumper for Redcat Gen7/Gen 7 Pro *Pictured with optional Hitch Receiver Specifications:--200mm width- Adjustable mounting positions/depths - allows for better departure angle over stock- Mounts using existing holes in frame- (hardware not included)- Steel construction - Hand Made/Welded. **Please Note: Our finish options provide a superficial coating and will scratch/chip... | From $46.95 USD |
|
SF11012 | Redcat Racing Gen8 Scout II 1/10 Scale Full-Width Front Bumper | Full-size Steel, welded front bumper for the Redcat Racing Gen8 Scout II*Pictures depict optional add-ons Specifications:-207mm wide-Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and SSD Ox Power Winch mounting pattern)- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) - see photos (Longer hardware recommended-... | From $55.95 USD |
|
00076 | Universal Rear Bumper Brackets (2) * | Universal Rear Bumper mounting brackets. Sold in Pairs. * Laser cut from 14ga steel * 70mm overall length (can be trimmed by builder) * 25mm mounting slot | $18.95 USD |
|
SF409000 | Standard Land Anchor | ScalerFab RC Scale Standard Land Anchor ***THIS IS NOT A FULL-SIZE ITEM! This is for a 1:10 scale rc (radio controlled) vehicle! Do not order for your full size vehicle. See measurements below. Laser-cut, hand welded w/ shovel front. Sprayed with Rustoleum Truck Bed Coating for added durability. Specifications:-approx. 110mm x 30mm x 50mm | $17.95 USD |
|
SF503011 | Standard Rear Bumper for Traxxas TRX4 D90 | Replica Full-size Steel Rear Bumper with Hitch Receiver and Shackle Mounts for the Traxxas TRX4 Defender 90 Upgrade your Traxxas TRX4 D90 with our Standard Rear Bumper. Made of durable steel, this bumper is a great replacement for the stock version. Enhance the protection of your vehicle and tackle off-road adventures... | $73.95 USD |
|
00135 | Vanquish Ripper Front Bumper with Brush Guard | Drive OVER the rocks, don't work around your bumper! RC Scale Welded Steel Front Bumper w/ Brush Guard for Vanquish Ripper Specifications: - 130mm width-Mounts to the outside of the frame rails using existing holes in frame (will need to pinch in frame rails slightly to fit bumper between the frame... | From $60.95 USD |
|
00159 | Skeleton Prerunner SCX10/SCX10 II UMG10 Front Bumper | Skeleton Prerunner Series Front Bumper for the SCX10 II UMG10 Unimog*Pictures depict optional add-ons. See below for additional mounting instructions. Specifications:- 195mm wide including wrapped edges- Will not fit a bumper-mounted winch (this rig is specifically built for a servo winch)- Steel construction - Hand Made/Welded.- Mounts using existing holes in frame - does... | From $65.95 USD |
|
00079 | Vaterra Ascender Front Bumper Brackets (2) * | Vaterra Ascender Front Bumper mounting brackets. Sold in Pairs. * Laser cut from 14ga steel * 10mm fore/aft adjustable mounting slots * 0mm height offset (sits even with top of frame rails) * 83m overall length (can be trimmed by builder)m | $17.45 USD |
|
SF507000 | Vaterra Ascender Hitch | Welded Steel Hitch for Vaterra Ascender * Mounts using existing holes and requires drilling (2) holes (hardware not included) * Steel construction - welded. * Comes with a HPI 4.8mm Ball Stud installed (welded) and (1) Lunsford 4.8mm Super Duty Ball Cup for Trailer * Comes with Safety Chain Loops *Painted in Rustoleum Truck Bed Coating | $26.95 USD |
|
SF12497 | SCX10/SCX10 II XJ 1/10 Scale Full-Width Front Bumper w/ Stinger | Full-size Steel, welded front bumper w/ Stingerfor the SCX10/ SCX10 2 XJ- (Also fits on the Traxxas TRX4 Chassis with the XJ body)*Pictures depict optional add-ons Specifications:-205mm wide- Raised brackets specifically for XJ Body- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and SSD Ox Power Winch mounting pattern)- Mounts... | From $60.95 USD |
|
SF11330 | Vanquish Ripper Front Bumper with Stinger | Drive OVER the rocks, don't work around your bumper! RC Scale Welded Steel Ultra Low-Profile Comp-Style Front Bumper for Vanquish Ripper Specifications: - Mounts to the outside of the frame rails using existing holes in frame (will need to pinch in frame rails slightly to fit bumper between the frame of... | From $51.95 USD |
|
00085 | Universal Hitch/Bumper Brackets (2) * | Universal hitch/bumper mounting brackets. Sold in Pairs.* Laser cut from 16ga steel* +/- 25mm height offset (up/down, depending upon orientation- can be trimmed by builder) * 17mm mounting slot | $11.95 USD |
|
SF13960 | SCX10/SCX10 II XJ 1/10 Scale Full-Width Front Bumper | Full-size Steel, welded front bumper for the SCX10/ SCX10 2 XJ (Also fits on the Traxxas TRX4 Chassis with the XJ body)*Pictures depict optional add-ons Specifications:-205mm wide- Raised brackets specifically for XJ Body- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and SSD Ox Power Winch mounting pattern)- Mounts using... | From $55.95 USD |
|
SF12850 | SCX10/SCX10 II Rock Sliders w/ Skid Plates | SCX10/ SCX10 2 Rock Sliders w/ Skid PlatesSteel Frame-mounted Rock Sliders w/ Optional Add-Ons Specifications:* 155mm-177mm (depending on body/tire size) Custom sizes available- enter in Options* Mounts using existing holes in frame (hardware not included)* Steel construction - Hand Made/Welded. **Please Note: Our finish options provide a superficial coating and will scratch/chip under... | From $56.95 USD |
