Search Results
Category
Vendor
Product Type
Tags
| Image | SKU | Title | Short Description | Price |
|---|---|---|---|---|
|
SF107000 | SCX10 Hitch | Welded Steel Hitch for Axial SCX10 * Mounts using existing holes and requires drilling (2) holes (hardware not included) * Steel construction - welded. * Comes with a HPI 4.8mm Ball Stud installed (welded) and (1) Lunsford 4.8mm Super Duty Ball Cup for Trailer * Comes with Safety Chain Loops *Painted in Rustoleum Truck Bed Coating | $26.95 USD |
|
00135 | SCX10 II UMG10 Unimog 1/10 Scale Full-Width Front Bumper | Full-size Steel, welded front bumper for the Axial SCX10 II UMG10 Unimog*Pictures depict optional add-ons. See below for additional mounting instructions. Specifications:-190mm wide- Will not fit a bumper-mounted winch (this rig is specifically built for a servo winch)- Steel construction - Hand Made/Welded.- Mounts using existing holes in frame - does not mount like... | From $60.95 USD |
|
SF13578 | SCX10/SCX10 II Narrow Front Bumper with Stinger | ScalerFab Welded Steel Narrow Front Bumperw/ Stinger for Axial SCX10/SCX10 II Jeep Rubicon, CRC Wrangler Unlimited, Deadbolt/G6, etc. Sits even with the top of the frame rails. For RAISED brackets (+20mm above top of frame rails), see our selection HERE **Some pictures may depict optional add-ons. Winch not included. Specifications:... | From $51.95 USD |
|
SF12236 | SCX10/SCX10 II Narrow Raised SR5/Honcho Front Bumper with Stinger | ScalerFab Welded Steel Narrow Raised Front Bumper with Stinger for Axial SCX10 Honcho/Pro-Line SR5 **Some pictures may depict optional add-ons. Winch not included. Specifications:- Requires trimming of plastic bumper for Pro-Line SR5 Body- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware... | From $51.95 USD |
|
SF12918 | SCX10/SCX10 II Double Bar Rock Sliders | SCX10/ SCX10 2 Double Bar Rock SlidersSteel Frame-mounted Double Bar Rock Sliders (shown w/ Optional Add-Ons) Specifications:* 155mm-177mm (depending on body/tire size) Custom sizes available- enter in Options -*NOTE: 177mm length - Fits 1.9 stock tires on stock wheels, others may not fit.* Built-in front and rear link riser mounts.* Mounts using... | From $56.95 USD |
|
00079 | SCX10 II XJ Front Bumper Brackets (2) * | SCX10 II XJ Front Bumper mounting brackets. Sold in Pairs. * Laser cut from 14ga steel * Fore/aft adjustable mounting slots * 10mm height offset (sits 10mm above top of frame rails) | $17.45 USD |
|
00135 | SCX10 II UMG10 Unimog Low-Profile 1/10 Scale Full-Width Front Bumper | Low-Profile Full-size Steel, welded front bumper for the SCX10 II UMG10 Unimog*Pictures depict optional add-ons. See below for additional mounting instructions. Specifications:-190mm wide- Will not fit a bumper-mounted winch (this rig is specifically built for a servo winch)- Steel construction - Hand Made/Welded.- Mounts using existing holes in frame - does not mount like... | From $60.95 USD |
|
00021 | Vaterra Ascender Standard Rock Sliders | Vaterra Ascender Standard Rock SlidersSteel Frame-mounted Standard Rock Sliders for Vaterra Ascender. *120-160mm length, depending on Body (K10, 1972 Bronco & F100 will be slightly angled up to match body line, K5 is straight out) *No need to remove stock battery tray- can be mounted with sliders using spacers and... | From $44.95 USD |
|
00080 | Vaterra Ascender Slider/Chassis/Cage Brackets * | Laser-Cut rock slider, custom chassis, and custom cage mounting brackets for Vaterra Ascender. Sold in Pairs. * 100mm x 12mm * Ascender skid plate bolt pattern w/ tab to retain stock battery tray (additional hardware and spacers may be required- not included) | $14.95 USD |
|
SF13524 | Wraith Front Bumper w/ Trail Bar | Welded Steel Front Bumper for Axial Wraith Jeep Wrangler Poison Spyder or Spawn with Trail Bar **Some pictures may depict optional add-ons. Specifications:- 115mm wide- Mounts using existing holes and hardware (hardware not included)- Steel construction - welded.- Pre-drilled to accept RC4WD Warn 9.5cti winch - underside is accessible. WILL NOT FIT... | From $53.95 USD |
|
00077 | Wraith Rock Slider/Chassis/Cage Brackets (2) * | Laser-Cut rock slider, custome chassis, and custom cage mounting brackets for Wraith. Sold in Pairs. * laser cut from 16ga steel * 135mm x 10mm * Wraith skid plate bolt pattern | $17.45 USD |
|
SF201121 | Wraith Front Bumper w/ Stinger | Welded Steel Front Bumper for Axial Wraith Jeep Wrangler Poison Spyder or Spawn with Stinger**Some pictures may depict optional add-ons. Specifications:- 115mm wide- Mounts using existing holes and hardware (hardware not included)- Steel construction - welded. **Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons... | From $53.95 USD |
|
SF706560 | Large Universal Basket-style Roof Rack | RC Scale Steel Large Universal Basket-Style Roof Rack (shown on the Proline Jeep Rubicon Body) Specifications:* Pre-drilled for SCX10 Jeep Rubicon. May require drilling mounting holes on other bodies.*Same base as our low-profile roof rack, but with raised wrap-around border.*Plenty of room to mount lights front/rear with added protection of... | $28.95 USD |
|
Axial Adventure SCX10 Pro 4WD Chassis Comp-Style Front Bumper | Choose your own adventure with the ScalerFab Comp-style front bumper for Axial Adventure SCX10 Pro 4WD Chassis. Built with carbon steel, this bumper will let you trail with confidence. Customize with our optional add-ons for your specific body. Specifications: - Approx. 82mm wide bumper with 80mm wide inside bracket measurement-Straight mounting... | From $51.95 USD | |
|
00078 | Raised SCX10/SCX10 II Front Bumper Brackets (2) * with Adjustable Mounting Options | Raised SCX10 Front Bumper mounting brackets. Sold in Pairs. Use this bracket to build your own OR for 2 additional mounting options to raise the stock plastic SCX10 Bumper to eliminate bumper/body gaps. Adjust the height an additional 10 or 20mm, depending on body style or desired look. **Additional Hardware needed... | $17.45 USD |
|
SF13993 | RR10 Bomber Front Bumper w/ Stinger | Toughen up and go full-throttle with the ScalerFab Bomber Front Bumper. The solid steel construction, backed by a lifetime warranty, means you can go beyond the trail with confidence! RR10 Bomber Front Bumper w/ Stinger **Some pictures may depict optional add-ons. * Mounts using existing holes and hardware (hardware not included). Will... | From $45.95 USD |
|
00082 | Universal Long Rear Bumper Brackets- (2) * | Universal Rear Bumper mounting brackets- long. Sold in Pairs. * Laser cut from 14ga steel * 100mm overall length (can be trimmed by builder) * 25mm mounting slot | $17.45 USD |
|
SF10287 | Prerunner Series RC4wd C2X Front Bumper | Our most popular series has made it to the RC4WD C2X! The Prerunner series was designed for a combination of looks and performance under scale use. Made from 3/16" rod, the Prerunner Front Bumper for the C2X is a low-profile, scale trail armor option. Full-size Steel, welded Prerunner Series Front Bumper for... | From $76.45 USD |
|
Narrow Front Bumper for Traxxas TRX-4 1970's Series (K5 Blazer/K10 Truck/F150) | ScalerFab Welded Steel Narrow Front Bumper w/ Trail Bar or Stinger for Traxxas TRX4 Chevrolet K5 Blazer, K10 truck, and Ford F-150 Truck Go off-roading with confidence in your Traxxas TRX-4 1970's Series (K5 Blazer/K10 Truck/F150) with the Narrow Front Bumper with Trail Bar from ScalerFab. Conquer any terrain with... | From $51.95 USD | |
|
12345 | Heavy-Duty Land Anchor Add-On | $19.95 USD |
