Search Results
Category
Vendor
Product Type
Tags
| Image | SKU | Title | Short Description | Price |
|---|---|---|---|---|
|
SF11388 | Redcat Everest Gen7/Gen7 Pro Standard Rear Bumper | ScalerFab Welded Steel Rear Bumper for Redcat Gen7/Gen 7 Pro *Pictured with optional Hitch Receiver Specifications:--200mm width- Adjustable mounting positions/depths - allows for better departure angle over stock- Mounts using existing holes in frame- (hardware not included)- Steel construction - Hand Made/Welded. **Please Note: Our finish options provide a superficial coating and will scratch/chip... | From $46.95 USD |
|
SF11252 | Prerunner Series Redcat Everest (Gen 7/ Gen 7 Pro) Rear Bumper | ScalerFab Welded Steel Prerunner Series Rear Bumper for Redcat Everest Gen 7/ Gen 7 Pro Specifications:- Adjustable mounting positions/depths - allows for better departure angle over stock- Mounts using existing holes in frame and requires drilling (2) holes - does not mount like stock plastic bumper(s) - (hardware not included)- Steel construction - Hand Made/Welded.... | From $61.95 USD |
|
SF11189 | Custom Rock Slider Off-Set/Length | $5.95 USD | |
|
|
SF11188 | Custom Double Bar Rock Slider Length | $10.45 USD | |
|
SF11771 | 1/10 Scale Full-Width Front Bumper w/ Stinger for Traxxas TRX4 D90 | Full-size Steel, welded front bumper w/ Stinger for the Traxxas TRX4 Defender 90*Pictures depict optional add-ons Specifications:-205mm wide- Brackets specifically for TRX4- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories)- Steel... | From $60.95 USD |
|
SF11030 | Redcat Racing Gen8 Scout II Rear Bumper | ScalerFab Welded Steel Rear Bumper for Redcat Racing Gen8 Scout II *Pictured with optional Hitch Receiver- this option works with stock hitch pin and pug, as well as the Axial Trailer Hitch Insert. Enhance your RC vehicle with the Redcat Racing Gen8 Scout II Rear Bumper! This scale armor adds... | From $46.95 USD |
|
00135 | SCX10 II UMG10 Unimog 1/10 Scale Full-Width Front Bumper | Full-size Steel, welded front bumper for the Axial SCX10 II UMG10 Unimog*Pictures depict optional add-ons. See below for additional mounting instructions. Specifications:-190mm wide- Will not fit a bumper-mounted winch (this rig is specifically built for a servo winch)- Steel construction - Hand Made/Welded.- Mounts using existing holes in frame - does not mount like... | From $60.95 USD |
|
00159 | Skeleton Prerunner SCX10/SCX10 II UMG10 Front Bumper | Skeleton Prerunner Series Front Bumper for the SCX10 II UMG10 Unimog*Pictures depict optional add-ons. See below for additional mounting instructions. Specifications:- 195mm wide including wrapped edges- Will not fit a bumper-mounted winch (this rig is specifically built for a servo winch)- Steel construction - Hand Made/Welded.- Mounts using existing holes in frame - does... | From $65.95 USD |
|
SF11158 | Retro Series Vanquish VS4-10 Origin/Pro/Ultra Front Bumper | The Retro Series features double tube work for that classic, old-school look! Pairs perfectly with the Retro Series Rear Bumper HERE. Full-size Steel, welded Retro Series Front Bumper for the Vanquish VS4-10 Origin//Pro/Ultra! Specifications:- Approx. 190mm wide- Mounts using existing hardware- Steel construction - Hand Made/Welded. **Please Note: Our finish options... | From $76.45 USD |
|
SF11148 | Retro Series Vanquish VS4-10 Origin/Pro/Ultra Rear Bumper | A Brand New Series- The Retro Series features double tube work for that classic, old-school look! Pairs perfectly with the Retro Series Front Bumper HERE ScalerFab Welded Steel Prerunner Series Rear Bumper for Vanquish VS4-10 Origin/Ultra/Pro Specifications:- - Approx 200mm wide- Adjustable mounting positions/depths - allows for better departure angle.- Mounts using existing... | From $61.95 USD |
|
|
SF11109 | 300lb Test Synthetic Winch Line (5' Length-Colors will vary) Optional Add-on | $5.00 USD | |
|
SF11056 | Prerunner Series Redcat Racing Gen8 Scout II Front Bumper | Improve approach angle and performance over stock with our Welded Steel Prerunner Series Front Bumper for Redcat Racing Gen8 Scout II Specifications:- 207mm- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) - see photos (Longer hardware recommended- hardware not included)- Steel construction - Hand Made/Welded.- Has slots... | From $60.95 USD |
|
00158 | PreRunner Series Redcat Racing Gen8 Scout II Rear Bumper | ScalerFab Welded Steel Prerunner Series Rear Bumper for Redcat Racing Gen8 Scout II Specifications:--220mm width including wrapped ends- Adjustable mounting positions/depths - allows for better departure angle over stock- Mounts using existing holes in frame and requires drilling (2) holes - does not mount like stock plastic bumper(s) - (hardware not included)- Steel... | From $61.95 USD |
|
00135 | SCX10 II UMG10 Unimog Low-Profile 1/10 Scale Full-Width Front Bumper | Low-Profile Full-size Steel, welded front bumper for the SCX10 II UMG10 Unimog*Pictures depict optional add-ons. See below for additional mounting instructions. Specifications:-190mm wide- Will not fit a bumper-mounted winch (this rig is specifically built for a servo winch)- Steel construction - Hand Made/Welded.- Mounts using existing holes in frame - does not mount like... | From $60.95 USD |
|
SF10913 | 1/10 Scale Full-Width Front Bumper for Traxxas TRX4 Sport | Full-Size Steel, Welded Front Bumper For The Traxxas TRX4 Sport Specifications:-190mm wide-Bumper Top Plate sites approx. 20mm above the top of the frame rail.**REQUIRES Trimming of body for fitment. Bumper is not made to fit a winch, but does have pre-drilled holes due to the laser cut top plate that is... | From $55.95 USD |
|
00188 | Redcat Racing Gen8 Scout II Rock Sliders | Redcat Racing Gen8 Scout II Rock Sliders(**Pics on vehicle depict optional Double Bar & Skid Plate add-ons) *NOTE:-Will need to trim approx. 1/8" off the rocker portion of the body for best fitment. - currently only available when using the stock wheelbase (middle holes, front & rear). Additional options will be... | From $49.95 USD |
|
SF2804000 | SCX10 II UMG10 Rock Sliders | SCX10/ SCX10 2 Rock Sliders For UMG10 UnimogSteel Frame-mounted Rock Sliders w/ Optional Add-Ons (Shown in pictures) **Note - these sliders mount directly to the frame rails and take the place of the stock skid. We highly recommend the skid plates option on our sliders for performance and in order to mount... | From $44.95 USD |
|
SF11134 | Vanquish VS4-10 Origin/Pro/Ultra Rear Bumper | ScalerFab Welded Steel Rear Bumper for the Vanquish VS4-10 Origin/Pro/Ultra Transform your vehicle with the Vanquish VS4-10 Rear Bumper! Experience added strength and a more realistic scale appearance with scalerfab technology. Upgrade your scale game and conquer the challenges ahead! Specifications:- - Approximately 200mm wide -Adjustable mounting positions/depths - allows for better departure... | From $55.95 USD |
|
SF11116 | Vanquish VS4-10 Origin/Pro/Ultra 1/10 Scale Full-Width Front Bumper | Full-size Steel, welded front bumper for the Vanquish VS4-10 Origin/Ultra/Pro *Pictures may depict optional add-ons Trail Bar or Stinger Option Available Upon Request- (+$5). Email orders@scalerfab.com after placing order to add option. Specifications:- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and SSD Ox Power Winch mounting pattern)- Mounts... | From $55.95 USD |
|
SF11012 | Redcat Racing Gen8 Scout II 1/10 Scale Full-Width Front Bumper | Full-size Steel, welded front bumper for the Redcat Racing Gen8 Scout II*Pictures depict optional add-ons Specifications:-207mm wide-Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and SSD Ox Power Winch mounting pattern)- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) - see photos (Longer hardware recommended-... | From $55.95 USD |
