Search Results
Category
Vendor
Product Type
Tags
| Image | SKU | Title | Short Description | Price |
|---|---|---|---|---|
|
SF12236 | SCX10/SCX10 II Narrow Raised SR5/Honcho Front Bumper with Stinger | ScalerFab Welded Steel Narrow Raised Front Bumper with Stinger for Axial SCX10 Honcho/Pro-Line SR5 **Some pictures may depict optional add-ons. Winch not included. Specifications:- Requires trimming of plastic bumper for Pro-Line SR5 Body- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware... | From $51.95 USD |
|
SF11749 | SCX10/SCX10 II Honcho "Barely There" Rear Bumper | ScalerFab Welded Steel Low-Profile Rear Bumper for Axial SCX10/SCX10 II Honcho. Specifications:- Slightly wider than the width of the frame rails. ~100mm- Mounts using existing holes in frame and requires drilling (2) holes or enlarging (2) existing holes for secure mounting (hardware not included)- 3/16" Steel rod construction - Hand Made/Welded.... | From $40.95 USD |
|
SF12918 | SCX10/SCX10 II Double Bar Rock Sliders | SCX10/ SCX10 2 Double Bar Rock SlidersSteel Frame-mounted Double Bar Rock Sliders (shown w/ Optional Add-Ons) Specifications:* 155mm-177mm (depending on body/tire size) Custom sizes available- enter in Options -*NOTE: 177mm length - Fits 1.9 stock tires on stock wheels, others may not fit.* Built-in front and rear link riser mounts.* Mounts using... | From $56.95 USD |
|
00079 | SCX10 II XJ Front Bumper Brackets (2) * | SCX10 II XJ Front Bumper mounting brackets. Sold in Pairs. * Laser cut from 14ga steel * Fore/aft adjustable mounting slots * 10mm height offset (sits 10mm above top of frame rails) | $17.45 USD |
|
00135 | SCX10 II UMG10 Unimog Low-Profile 1/10 Scale Full-Width Front Bumper | Low-Profile Full-size Steel, welded front bumper for the SCX10 II UMG10 Unimog*Pictures depict optional add-ons. See below for additional mounting instructions. Specifications:-190mm wide- Will not fit a bumper-mounted winch (this rig is specifically built for a servo winch)- Steel construction - Hand Made/Welded.- Mounts using existing holes in frame - does not mount like... | From $60.95 USD |
|
00076 | Universal Rear Bumper Brackets (2) * | Universal Rear Bumper mounting brackets. Sold in Pairs. * Laser cut from 14ga steel * 70mm overall length (can be trimmed by builder) * 25mm mounting slot | $18.95 USD |
|
00081 | Universal Raised Rear Bumper Brackets- (2) * | Universal Rear Bumper mounting brackets- raised. Sold in Pairs. * Laser cut from 12ga steel * 70mm overall length (can be trimmed by builder) * +5mm height offset (can be trimmed by builder) * 25mm mounting slot | $17.45 USD |
|
SF13866 | SCX10/SCX10 II Rock Sliders | SCX10/ SCX10 2 Rock SlidersSteel Frame-mounted Rock Sliders w/ Optional Add-Ons Specifications:* 155mm-177mm (depending on body/tire size) Custom sizes available- enter in Options -*NOTE: 177mm length - Fits 1.9 stock tires on stock wheels, others may not fit.* Built in front and rear link riser mounts* Mounts using existing holes in frame... | From $44.95 USD |
|
SF13508 | Steel Rear Bumper for Axial Wraith/Spawn | Welded Steel Rear Bumper for Axial Wraith Jeep Wrangler Poison Spyder or Spawn Upgrade your ride with the Wraith Rear Bumper! Made of durable steel, this bumper adds a touch of style and maximum performance to your vehicle. Perfect for those who love a little extra flair in their off-roading adventures. Specifications:-... | From $44.95 USD |
|
SF409000 | Standard Land Anchor | ScalerFab RC Scale Standard Land Anchor ***THIS IS NOT A FULL-SIZE ITEM! This is for a 1:10 scale rc (radio controlled) vehicle! Do not order for your full size vehicle. See measurements below. Laser-cut, hand welded w/ shovel front. Sprayed with Rustoleum Truck Bed Coating for added durability. Specifications:-approx. 110mm x 30mm x 50mm | $17.95 USD |
|
SF503011 | Standard Rear Bumper for Traxxas TRX4 D90 | Replica Full-size Steel Rear Bumper with Hitch Receiver and Shackle Mounts for the Traxxas TRX4 Defender 90 Upgrade your Traxxas TRX4 D90 with our Standard Rear Bumper. Made of durable steel, this bumper is a great replacement for the stock version. Enhance the protection of your vehicle and tackle off-road adventures... | $73.95 USD |
|
00135 | Vanquish Ripper Front Bumper with Brush Guard | Drive OVER the rocks, don't work around your bumper! RC Scale Welded Steel Front Bumper w/ Brush Guard for Vanquish Ripper Specifications: - 130mm width-Mounts to the outside of the frame rails using existing holes in frame (will need to pinch in frame rails slightly to fit bumper between the frame... | From $60.95 USD |
|
00159 | Skeleton Prerunner SCX10/SCX10 II UMG10 Front Bumper | Skeleton Prerunner Series Front Bumper for the SCX10 II UMG10 Unimog*Pictures depict optional add-ons. See below for additional mounting instructions. Specifications:- 195mm wide including wrapped edges- Will not fit a bumper-mounted winch (this rig is specifically built for a servo winch)- Steel construction - Hand Made/Welded.- Mounts using existing holes in frame - does... | From $65.95 USD |
|
SF14248 | Universal Rock Slider/Chassis/Cage Brackets w/ Link Riser Mount (2) * | Laser-cut mounting brackets with built-in Front/Rear Link Riser Mount Universale fit for SCX10/SCX10 II, Element RC, Traxxas TRX4 & gen 7/8/ (with the link riser mounts removed), Vaterra Ascender, G-Made Sawback, and ECX Barrage. Also use for custom chassis, or custom cage builds. Sold in pairs. * Built-in Front & Rear... | $18.95 USD |
|
00079 | Vaterra Ascender Front Bumper Brackets (2) * | Vaterra Ascender Front Bumper mounting brackets. Sold in Pairs. * Laser cut from 14ga steel * 10mm fore/aft adjustable mounting slots * 0mm height offset (sits even with top of frame rails) * 83m overall length (can be trimmed by builder)m | $17.45 USD |
|
00086 | Universal Fairlead Mount | Universal Fairlead Mount. * Laser cut from 16ga steel * 30mm x 85mm generic plate (can be trimmed by builder) * 31.5mm bolt pattern (same as RC4WD WARN 9.5cti winch) | $14.00 USD |
|
SF507000 | Vaterra Ascender Hitch | Welded Steel Hitch for Vaterra Ascender * Mounts using existing holes and requires drilling (2) holes (hardware not included) * Steel construction - welded. * Comes with a HPI 4.8mm Ball Stud installed (welded) and (1) Lunsford 4.8mm Super Duty Ball Cup for Trailer * Comes with Safety Chain Loops *Painted in Rustoleum Truck Bed Coating | $26.95 USD |
|
SF12497 | SCX10/SCX10 II XJ 1/10 Scale Full-Width Front Bumper w/ Stinger | Full-size Steel, welded front bumper w/ Stingerfor the SCX10/ SCX10 2 XJ- (Also fits on the Traxxas TRX4 Chassis with the XJ body)*Pictures depict optional add-ons Specifications:-205mm wide- Raised brackets specifically for XJ Body- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and SSD Ox Power Winch mounting pattern)- Mounts... | From $60.95 USD |
|
SF12218 | SCX10/SCX10 II Raised Comp-Style SR5/Honcho Front Bumper with Trail Bar | Our Raised Comp-Style SR5 Trail Armor is specifically made for the best possible approach angle while still qualifying for your SORRCA scale points, which is why it only works with a chassis-mounted servo winch. For products that work with a bumper-mounted winch, see our Raised Narrow and Prerunner Series Bumpers. ScalerFab Welded... | From $51.95 USD |
|
SF11330 | Vanquish Ripper Front Bumper with Stinger | Drive OVER the rocks, don't work around your bumper! RC Scale Welded Steel Ultra Low-Profile Comp-Style Front Bumper for Vanquish Ripper Specifications: - Mounts to the outside of the frame rails using existing holes in frame (will need to pinch in frame rails slightly to fit bumper between the frame of... | From $51.95 USD |
