Options for clipless body mount bracket
2 artículos
Metal Replica Non-Winch Front Bumper for Axial Adventure SCX10 III Jeep CJ-7
Precio habitual $57.95 USDScalerFab Welded Steel Replica Non-Winch Front Bumper for Axial SCX10 III Jeep CJ-7 Trail Bar & Stinger options available. ** NEW OPTION - CLIPLESS BODY MOUNT BRACKET
*This bumper does NOT fit a winch. Click for Winch Bumper For CJ-7.
Expertly crafted metal front bumper designed specifically for Axial Adventure's SCX10 III Jeep CJ-7. Made with durable metal for a realistic scale appearance and unbeatable performance. Provides the lowest approach angle without sacrificing strength. Don't worry about running a winch - this bumper is designed for maximum performance.
The ScalerFab SCX10 III CJ-7 bumpers are designed to work with the stock CJ-7 body post mounting system and includes post mounts build into the bumper. Bumpers will not mount with any after-market crossmembers or anything that would interfere with the end of the frame rails.
Specifications:
- 80mm wide
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel and mounts using existing holes in frame.
- Steel construction - Hand Made/Welded.
- No fore/aft adjustment
Mounting Instructions:
1. Bumper is made to slide inside the c-channel of the frame rails.
2. Mount by matching holes in the body post mount with holes in the brackets and frame rails, as shown below.
3. Back screws with a washer and nut.
View of ScalerFab's Jeep CJ-7 Clipless Body Mount Bracket
Información de garantía de por vida
ScalerFab ofrece una garantía de por vida en todos nuestros Trail Armor. Ofrecemos garantía contra rotura y flexión de parachoques, deslizadores de rocas, portaequipajes, enganches, etc.
Si tiene un problema con su artículo, deje información detallada a continuación o puede enviarla por correo.
Los artículos para reparación/reemplazo en garantía deben enviarse por correo a:
ScalerFab, Inc.
Apartado postal 130
Dividir, CO 80814
Los reemplazos y/o reembolsos generalmente se procesan dentro de 5 a 7 días hábiles luego de la recepción del artículo. (La dirección se reserva todos los derechos)
Metal Replica Winch Front Bumper for Axial Adventure SCX10 III Jeep CJ-7
Precio habitual $62.95 USDScalerFab Welded Steel Replica Winch Front Bumper for Axial Adventure SCX10 III Jeep CJ-7 Trail Bar & Stinger options available. **NEW option for Clipless Body Mount Bracket.
Expertly crafted metal front bumper designed specifically for Axial Adventure's SCX10 III Jeep CJ-7. Made with durable metal for a realistic scale appearance and unbeatable performance. Provides the lowest approach angle while still allowing for a bumper-mounted winch.
The ScalerFab Axial Adventure SCX10 III Jeep CJ-7 bumpers are designed to work with the stock CJ-7 body post mounting system and includes post mounts build into the bumper. Bumpers will not mount with any after-market crossmembers or anything that would interfere with the end of the frame rails.
Specifications:
-** Clipless body mounts available through Fine Laser Designs.
- Please note that minor adjustments to the clipless body mount seat may be needed to customize the fit of the body to your liking. See instructional video below for adjusting fit, if needed.
- 80mm wide
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel and mounts using existing holes in frame.
- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and 8274 Winch, 3Racing Winch, and SSD Ox Power Winch mounting pattern)
- Steel construction - Hand Made/Welded.
- No fore/aft adjustment
TO MOUNT WINCH: You will need to flip the winch mounting plate in order to install on bumper.
Mounting Instructions:
1. Bumper is made to slide inside the c-channel of the frame rails.
2. Mount by matching holes in the body post mount with holes in the brackets and frame rails, as shown below.
3. Back screws with a washer and nut.
ScalerFab Welded Steel Replica Non-Winch Front Bumper for Axial Adventure SCX10 III Jeep CJ-7 Trail Bar & Stinger options available. **NEW option for Clipless Body Mount Bracket.
*This bumper does NOT fit a winch. Click for Winch Bumper For CJ-7.
Expertly crafted metal front bumper designed specifically for Axial Adventure's SCX10 III Jeep CJ-7. Made with durable metal for a realistic scale appearance and unbeatable performance. Provides the lowest approach angle without sacrificing strength. Don't worry about running a winch - this bumper is designed for maximum performance.
The ScalerFab Axial Adventure SCX10 III Jeep CJ-7 bumpers are designed to work with the stock CJ-7 body post mounting system and includes post mounts build into the bumper. Bumpers will not mount with any after-market crossmembers or anything that would interfere with the end of the frame rails.
Specifications:
-** Clipless body mounts available through Fine Laser Designs.
- Please note that minor adjustments to the clipless body mount seat may be needed to customize the fit of the body to your liking. See instructional video below for adjusting fit, if needed.
- 80mm wide
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel and mounts using existing holes in frame.
- Steel construction - Hand Made/Welded.
- No fore/aft adjustment
Mounting Instructions:
1. Bumper is made to slide inside the c-channel of the frame rails.
2. Mount by matching holes in the body post mount with holes in the brackets and frame rails, as shown below.
3. Back screws with a washer and nut.
Información de garantía de por vida
ScalerFab ofrece una garantía de por vida en todos nuestros Trail Armor. Ofrecemos garantía contra rotura y flexión de parachoques, deslizadores de rocas, portaequipajes, enganches, etc.
Si tiene un problema con su artículo, deje información detallada a continuación o puede enviarla por correo.
Los artículos para reparación/reemplazo en garantía deben enviarse por correo a:
ScalerFab, Inc.
Apartado postal 130
Dividir, CO 80814
Los reemplazos y/o reembolsos generalmente se procesan dentro de 5 a 7 días hábiles luego de la recepción del artículo. (La dirección se reserva todos los derechos)
Customer Reviews
Based on 7 reviews
57%
(4)
0%
(0)
0%
(0)
0%
(0)
43%
(3)
D
Front bumper is missing body mount holes. Rear bumper mounts to the frame are welded in the wrong spot so its making the bumper sit off a little bit which is pulling on the body to get the body mounts in. Would of like to seen the rocks slids on a angle instead of up against the body
K
The fit was perfect, and it looks amazing!
T
This front bumper is awesome I would buy again
L
Very disappointed. I had to drill out the shackle mount to fit hardware that comes with the shackles. I wish I would have just bought one on AliExpress and saved myself $80.
H
Metal Replica Winch Front Bumper for Axial Adventure SCX10 III Jeep CJ-7
