Search Results

Full-size Steel, welded front bumper w/ Stinger for the Traxxas TRX4 Defender 90*Pictures depict optional add-ons Specifications:-205mm wide- Brackets specifically for TRX4- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories)- Steel...

ScalerFab Steel Axial Racing SCX10III Base Camp Adjustable, Bolt- On Rock SlidersSteel Frame-mounted Rock Sliders w/ Optional Add-Ons (Shown in pictures) slide right into the stock slot location of the plastic skid plate to replace the stock rock sliders. (MADE FOR STOCK VEHICLE- Any modifications may affect clearance of front...

Standard Full-size Steel Rear Bumper for the Traxxas TRX4 Defender 90 Another style, different from our Replica Rear Bumper. This bumper is straight and made for the lowest approach angle. Specifications:- 190mm wide- Mounts using existing hardware plus additional nuts (not included)- Steel construction - Hand Made/Welded. **Please Note: Our finish...

Protect your rig and look cool doing it! This is the brand new, just released ScalerFab RC4Wd TF2 Construction. Simple, yet strong and full of SCALE! ScalerFab RC4WD TF2 Construction Rack Specifications:*Some Pictures Depict Optional Add-Ons-Hand-welded steel 3/16 rod-Mounts by drilling 4 holes into truck bed, hardware not included. (*Requires four...

Don't get stuck in a rut with this Scale Recovery Package full of recovery items for added scale points & performance on the trails! Scale Recovery Package for 1:10 Scale RC Trucks What's included:- ScalerFab Standard Land Anchor- ScalerFab Aluminum Sand Ramps- 5' 300lb Test Winch Line (color chosen at random...

Full-size Steel, welded front bumper w/ trail bar for the Traxxas TRX4 Defender 90*Pictures depict optional add-ons Specifications:-205mm wide- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and SSD Ox Power Winch mounting pattern)- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware...

Fits the following bodies, and may fit others (bumper sits even with top of frame rails and offers some fore/aft adjustment): -Jeep Wrangler-Pro-Line SR5 (with the stock plastic bumper)-Pro-Line Jeep Wrangler-G6/Deadbolt-CRC Jeep Wrangler Unlimited-Pro-Line Racing 46 Power Wagon With over 50 possible combinations to choose from on this bumper, you...

Front Bumper with Trail Bar for the G-Made Sawback Specifications: - 115mm wide, Class 1 option is 167mm wide- Mounts using existing hardware.- Steel construction - Hand Made/Welded.- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and 8274 Winch, 3Racing Winch, and SSD Ox Power Winch mounting pattern) **Please Note: Our finish...

Fits the following bodies, and may fit others (bumper sits even with top of frame rails and offers some fore/aft adjustment): -Jeep Wrangler-Pro-Line SR5 (with the stock plastic bumper)-Pro-Line Jeep Wrangler-G6/Deadbolt-CRC Jeep Wrangler Unlimited-Pro-Line Racing 46 Power Wagon With over 50 possible combinations on to choose from on this bumper,...

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below: -Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with...

Add scale points to your rig, not weight! These super light ScalerFab Aluminum Sand Ramps will get you over obstacles without weighing down you rig. Need I say more? Aluminum Sand Ramps *Approximately 2" x 6"

ScalerFab RC Scale Heavy-Duty Land Anchor w/ Hook ***THIS IS NOT A FULL-SIZE ITEM! This is for a 1:10 scale rc (radio controlled) vehicle! Do not order for your full size vehicle. See measurements below. Laser-cut, hand welded w/ shovel front and an added hook on the back side for additional connection...

ScalerFab RC Scale Heavy-Duty Land Anchor ***THIS IS NOT A FULL-SIZE ITEM! This is for a 1:10 scale rc (radio controlled) vehicle! Do not order for your full size vehicle. See measurements below. Laser-cut, hand welded w/ shovel front. Sprayed with Rustoleum Truck Bed Coating for added durability. Specifications:-approx. 110mm x 30mm x 50mm

Full-size Steel, welded rear bumper for the G-Made Sawback w/ Tire Carrier and Jerry Can Mount Specifications: *Note: pictures mounted on vehicle show an older version with the shackle mounts on the back of the bumper. Please see updated pictures of shackle mounts welded below bumper for best departure angle....

G-Made Sawback 4-pt. Roll BarSteel roll bar for G-made Sawback. Mounts onto body. Great for light use. ***We recommend the steel backing plates add-on for medium to heavy use to prevent body damage when rolled. -3/16" solid steel -Hand welded **Requires drilling 4 holes in body. Hardware included.

ScalerFab Welded Steel Narrow Front Bumper for Element RC Enduro Knightrunner Trail Truck Sits even with the top of the frame rails. **Some pictures may depict optional add-ons. Winch not included. Specifications: - 115mm wide- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and 8274 Winch, 3Racing Winch, and SSD...

Steel, welded rear bumper for a SCX10/SCX10 II NuKizer. ***Body will need to be trimmed for custom fit. ***Some Photos depict optional Add-ons, which may be an additional cost. Engineered with precision and style, the Full-Width Rear Bumper for Axial SCX10/SCX10 II NuKizer offers unparalleled performance and a sleek, scale look. Dominate...