PreRunner Series SCX10/SCX10 II XJ Rear Bumper

$59.95 USD

ScalerFab Welded Steel Prerunner Series Rear Bumper for Axial SCX10/ SCX10 2 XJ (Also fits on the Traxxas TRX4 Chassis with the XJ body)

Specifications:-
-207mm width with wrapped ends
- Adjustable mounting positions/depths - allows for better departure angle over stock
- Mounts using existing holes in frame and requires drilling (2) holes - does not mount like stock plastic bumper(s) - (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use.

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

Name: PreRunner Series SCX10/SCX10 II XJ Rear Bumper
Brand: SCX10
Price: 59.95 USD
Availability: InStock

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

PreRunner Series SCX10/SCX10 II XJ Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

SCX10 Deadbolt/G6 Rear Bumper

$44.95 USD

ScalerFab Welded Steel Rear Bumper for Axial SCX10 Deadbolt/G6.

Take your RC to the next level with the ScalerFab Deadbolt/G6 Rear Bumper! Increase your style and performance with one of our most popular items for this platform. Dominate on any terrain and stand out from the pack. Upgrade now and unleash your adventurous side!

Specifications:
-130mm width
- Mounts using existing holes in frame and requires drilling (2) holes or enlarging (2) existing holes for secure mounting (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Flat Black: not as susceptible to chips

-Raw Steel: We recommend a raw steel finish if you intend to coat with a harder finish on your own.

Mounting instructions:

We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

SCX10 Deadbolt/G6 Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Prerunner Series SCX10/SCX10 II Deadbolt/G6 Rear Bumper

$44.95 USD

ScalerFab Prerunner Series Welded Steel Rear Bumper for Axial SCX10/SCX10 II Deadbolt/G6.

Specifications:
-130mm width
- Mounts using existing holes in frame and requires drilling (2) holes or enlarging (2) existing holes for secure mounting (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below: -Flat Black: not as susceptible to chips -Rustoleum Truck Bed Coating: easier to touch up using a can of Rustoleum Truck Bed Coating, available at Home Depot or Lowes. Raw Steel: We recommend a raw steel finish if you intend to coat with a harder finish on your own.

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Prerunner Series SCX10/SCX10 II Deadbolt/G6 Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

SCX10 II XJ Cherokee Rear Bumper

$44.95 USD

ScalerFab Welded Steel Rear Bumper for Axial SCX10/ SCX10 2 Jeep XJ Cherokee

*Pictured with optional License Plate Recess

Inspire your adventurous side with the classic style of a ScalerFab Rear bumper for the SCX10 II XJ Rear Bumper. Made for the daring off-roader, this bumper adds a touch of ruggedness to your rig. With its timeless design, this bumper not only enhances the look of your vehicle but also provides extra protection on your thrilling journeys!

Specifications:-
-205mm width
- Adjustable mounting positions/depths - allows for better departure angle over stock
- Mounts using existing holes in frame and requires drilling (2) holes - does not mount like stock plastic bumper(s) - (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Flat Black: not as susceptible to chips

-Raw Steel: We recommend a raw steel finish if you intend to coat with a harder finish on your own.

Mounting instructions:
We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

SCX10 II XJ Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Steel Metal Rear Bumper with Stinger for Axial Wraith/Spawn

$47.95 USD

Welded Steel Rear Bumper for Axial Wraith Jeep Wrangler Poison Spyder or Spawn with Stinger

**Some pictures may depict optional add-ons.

Specifications:
- Mounts using existing holes and hardware (hardware not included)
- Steel construction - welded.
- Pre-drilled to accept RC4WD Warn 9.5cti winch - underside is accessible. WILL NOT FIT Warn 8274 winch.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below: -Flat Black: not as susceptible to chips -Rustoleum Truck Bed Coating: easier to touch up using a can of Rustoleum Truck Bed Coating, available at Home Depot or Lowes. Raw Steel: We recommend a raw steel finish if you intend to coat with a harder finish on your own.

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Wraith Rear Bumper w/ Stinger - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Rear Bumper for SCX10 Jeep Rubicon

$44.95 USD

ScalerFab Welded Steel Rear Bumper for Axial SCX10 Jeep Rubicon.

Upgrade your SCX10 Jeep Rubicon with our rear bumper, featuring classic jeep styling and tough Scalerfab armor for ultimate protection. Dominate any terrain with confidence and style.

Specifications:-
-190mm width
- Adjustable mounting positions/depths - allows for better departure angle over stock, or allows use of stock swing-out tire carrier ($5 upcharge for drilling/welding to accommodate stock tire rack)
- Mounts using existing holes in frame and requires drilling (2) holes - does not mount like stock plastic bumper(s) - (hardware not included)
- Steel construction - Hand Made/Welded.

* Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Flat Black: not as susceptible to chips

-Raw Steel: We recommend a raw steel finish if you intend to coat with a harder finish on your own.

Mounting instructions:
We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Rear Bumper for SCX10 Jeep Rubicon - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Full-Width Rear Bumper for Axial SCX10 Power Wagon

$48.95 USD

Steel Welded Rear Bumper for a Axial SCX10 Power Wagon.

***Body will need to be trimmed for custom fit. ***Some Photos depict optional Add-ons, which may be an additional cost.

Upgrade your RC with the best! The SCX10 Power Wagon Rear Bumper offers both scale appearance and top-notch performance. Don't settle for less - add some style and power to your RC today!

Specifications:
- 200mm wide
- Hand-welded, steel rear bumper made for SCX10 Power Wagon.
- Mounts using existing holes in frame and requires drilling (2) holes - does not mount like stock plastic bumper(s) - (hardware not included)
- Has slots for adjustable fore/aft mounting

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

Mounting instructions:
*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

SCX10 Power Wagon Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Full-Width Rear Bumper for Axial SCX10/SCX10 II NuKizer

$48.95 USD

Steel, welded rear bumper for a SCX10/SCX10 II NuKizer.

***Body will need to be trimmed for custom fit. ***Some Photos depict optional Add-ons, which may be an additional cost.

Engineered with precision and style, the Full-Width Rear Bumper for Axial SCX10/SCX10 II NuKizer offers unparalleled performance and a sleek, scale look. Dominate rugged terrain and conquer new challenges with this durable and dynamic upgrade. Take your adventures to the next level with this must-have accessory!

Specifications:

-170mm wide
- Standard Brackets, not raised
- Hand-welded, steel rear bumper made for SCX10 Nukizer.
- Mounts using existing holes in frame and requires drilling (2) holes - does not mount like stock plastic bumper(s) - (hardware not included)
- Has slots for adjustable fore/aft mounting

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below: -Flat Black: not as susceptible to chips -Rustoleum Truck Bed Coating: easier to touch up using a can of Rustoleum Truck Bed Coating, available at Home Depot or Lowes. Raw Steel: We recommend a raw steel finish if you intend to coat with a harder finish on your own.

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

SCX10/SCX10 II NuKizer Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

SCX10 Honcho Rear Bumper

$44.95 USD

ScalerFab Welded Steel Rear Bumper for Axial SCX10 Honcho.

Enhance the appearance and performance of your trail rig with this SCX10 Honcho Rear Bumper. This scale accessory adds a touch of ruggedness and style to your vehicle, surpassing the limitations of the stock bumper. Upgrade with confidence and achieve the ultimate off-road experience.

Specifications:
-130mm width (same as G6/Deadbolt Rear Bumper)
- Mounts using existing holes in frame and requires drilling (2) holes or enlarging (2) existing holes for secure mounting (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Flat Black: not as susceptible to chips

-Raw Steel: We recommend a raw steel finish if you intend to coat with a harder finish on your own.

Mounting instructions:
We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

SCX10 Honcho Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Steel Rear Bumper for Axial Wraith/Spawn

$42.95 USD

Welded Steel Rear Bumper for Axial Wraith Jeep Wrangler Poison Spyder or Spawn

Upgrade your ride with the Wraith Rear Bumper! Made of durable steel, this bumper adds a touch of style and maximum performance to your vehicle. Perfect for those who love a little extra flair in their off-roading adventures.

Specifications:
- Mounts using existing holes and hardware (hardware not included)
- Steel construction - welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Flat Black: not as susceptible to chips

-Raw Steel: We recommend a raw steel finish if you intend to coat with a harder finish on your own.

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Wraith Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Prerunner Series Rear Bumper Add-On Option

$22.00 USD

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: not as susceptible to chips

-Rustoleum Truck Bed Coating: Superficial coating - chips easily, but is easier to touch up using a can of Rustoleum Truck Bed Coating, available here: HERE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Standard Rear Bumper for Traxxas TRX4 D90

$71.45 USD

Replica Full-size Steel Rear Bumper with Hitch Receiver and Shackle Mounts for the Traxxas TRX4 Defender 90

Upgrade your Traxxas TRX4 D90 with our Standard Rear Bumper. Made of durable steel, this bumper is a great replacement for the stock version. Enhance the protection of your vehicle and tackle off-road adventures with confidence.

Specifications:
- 190mm wide
- Mounts using existing hardware plus additional nuts (not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

Mounting instructions:

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Traxxas TRX4 D90 Standard Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Standard Rear Bumper Traxxas TRX4 D90

$53.95 USD

Standard Full-size Steel Rear Bumper for the Traxxas TRX4 Defender 90

Another style, different from our Replica Rear Bumper. This bumper is straight and made for the lowest approach angle.

Specifications:
- 190mm wide
- Mounts using existing hardware plus additional nuts (not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

Mounting instructions:

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Prerunner Series RC4WD TF2 Rear Bumper

$59.95 USD

Get the best departure angle possible with the ScalerFab steel Prerunner Series Rear Bumper for RC4WD Trail Finder 2!

Specifications:-
-180mm overall width
- Adjustable mounting positions/depths - allows for better departure angle over stock
- Mounts using existing holes in frame.
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

ALTTAGS: Trailfinder

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Prerunner Series RC4WD TF2 Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Quality workmanship

Awesome job!! Quick turn around! Looks and fits great!!

Prerunner Series RC4WD TF2 rear bumper

Awesome craftsmanship & fits well!

Looks and fits great.

Awesome.

SCX10/SCX10 II Honcho "Barely There" Rear Bumper

$39.50 USD

ScalerFab Welded Steel Low-Profile Rear Bumper for Axial SCX10/SCX10 II Honcho.

Specifications:
- Slightly wider than the width of the frame rails. ~100mm
- Mounts using existing holes in frame and requires drilling (2) holes or enlarging (2) existing holes for secure mounting (hardware not included)
- 3/16" Steel rod construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

SCX10/SCX10 II Honcho "Barely There" Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Loved the quality and the fit would recommend it to anyone

Excellent fit and finish

I did the custom measurement. Bumpers fit perfectly on my G Speed V3 custom portal build. Already recommended to my buddies. I'll be ording a set of bumpers for my next build 👍

Great for if you don’t wanna have to fabricate your own bumpers or don’t have the time to. All in all good product and company. Would recommend.

PreRunner Series Rear Bumper for Traxxas TRX4 D90

$59.95 USD

ScalerFab Welded Steel Prerunner Series Rear Bumper for Traxxas TRX4 Defender 90!

Specifications:-
-230mm overall width
- Adjustable mounting positions/depths - allows for better departure angle over stock
- Mounts using existing holes in frame- does not mount like stock plastic bumper(s) - (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

PreRunner Series Traxxas TRX4 D90 Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Prerunner Series RC4WD Marlin Crawler TF2 Rear Bumper

$59.95 USD

Get the best departure angle possible with the ScalerFab steel Prerunner Series Rear Bumper for RC4WD Marlin Crawler Trail Finder 2!

Specifications:-
-180mm overall width
- Adjustable mounting positions/depths - allows for better departure angle over stock
- Mounts using existing holes in frame. Does not mount like stock bumper. Requires removal of rear mounting bracket.
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

ALTTAGS: Trailfinder

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Prerunner Series RC4WD Marlin Crawler TF2 Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Very nice work

Definitely worth every penny

Awesome.

Best looking and most practical bumper for the marlin you can get. Excellent workmanship, good communication and fast shipping. Thanks!!!

Marlin rear bumper

Looks great !

Redcat Everest Gen7/Gen7 Pro Standard Rear Bumper

$44.95 USD

ScalerFab Welded Steel Rear Bumper for Redcat Gen7/Gen 7 Pro

*Pictured with optional Hitch Receiver

Specifications:-
-200mm width
- Adjustable mounting positions/depths - allows for better departure angle over stock
- Mounts using existing holes in frame- (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Redcat Everest Gen7/Gen7 Pro Standard Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Prerunner Series Redcat Everest (Gen 7/ Gen 7 Pro) Rear Bumper

$59.95 USD

ScalerFab Welded Steel Prerunner Series Rear Bumper for Redcat Everest Gen 7/ Gen 7 Pro

Specifications:
- Adjustable mounting positions/depths - allows for better departure angle over stock
- Mounts using existing holes in frame and requires drilling (2) holes - does not mount like stock plastic bumper(s) - (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Prerunner Series Redcat Everest (Gen 7/ Gen 7 Pro) Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Retro Series Vanquish VS4-10 Origin/Pro/Ultra Rear Bumper

$59.95 USD

A Brand New Series- The Retro Series features double tube work for that classic, old-school look! Pairs perfectly with the Retro Series Front Bumper HERE

ScalerFab Welded Steel Prerunner Series Rear Bumper for Vanquish VS4-10 Origin/Ultra/Pro

Specifications:-
- Adjustable mounting positions/depths - allows for better departure angle.
- Mounts using existing holes in frame- (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Retro Series Vanquish VS4-10 Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Vanquish VS4-10 Origin/Pro/Ultra Rear Bumper

$53.95 USD

ScalerFab Welded Steel Rear Bumper for the Vanquish VS4-10 Origin/Pro/Ultra

Transform your vehicle with the Vanquish VS4-10 Rear Bumper! Experience added strength and a more realistic scale appearance with scalerfab technology. Upgrade your scale game and conquer the challenges ahead!

Specifications:-
- Adjustable mounting positions/depths - allows for better departure angle.
- Mounts using existing holes in frame - (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Vanquish VS4-10 Origin/Pro/Ultra Rear Bumper

Vanquish VS4-10 Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Worth The Wait!

The finish and fitment is excellent. Installation was easy, both front and rear bumpers look great on my rig and add some weight/rigidity at the ends of the frame. Super stoked to get out on the rocks and show just how good they really are.

PreRunner Series Redcat Racing Gen8 Scout II Rear Bumper

$59.95 USD

ScalerFab Welded Steel Prerunner Series Rear Bumper for Redcat Racing Gen8 Scout II

Specifications:-
-220mm width including wrapped ends
- Adjustable mounting positions/depths - allows for better departure angle over stock
- Mounts using existing holes in frame and requires drilling (2) holes - does not mount like stock plastic bumper(s) - (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

PreRunner Series Redcat Racing Gen8 Scout II Rear Bumper

PreRunner Series Redcat Racing Gen8 Scout II Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Awesome!

These are the real deal!! No wonder your website has a disclaimer that these are RC parts not real truck parts! I will definitely be getting more parts made for other builds in the future!!

Absolutely the best scale body armor and bumpers out there! Fit and build is perfect. Will recommend it to anyone!

Best Upgrade Yet

These bumpers are solid.

Awesome Bumpers!

These are well made and strong, they mound directly to the frame and fit perfectly. Shipping was pretty quick considering they're hand made. They came well packaged, no issues at all. Highly recommend!

Redcat Racing Gen8 Scout II Rear Bumper

$44.95 USD

ScalerFab Welded Steel Rear Bumper for Redcat Racing Gen8 Scout II

*Pictured with optional Hitch Receiver- this option works with stock hitch pin and pug, as well as the Axial Trailer Hitch Insert.

Enhance your RC vehicle with the Redcat Racing Gen8 Scout II Rear Bumper! This scale armor adds extra protection and style to your RC, ensuring a bolder performance on any terrain. Take your RC adventures to the next level with this must-have upgrade!

Specifications:-
-180mm width NOTE- made to fit within the stock body cutout. For a wider/custom width, enter in the space provided below. (You'll need to trim the body to accommodate more width)
- Adjustable mounting positions/depths - allows for better departure angle over stock
- Mounts using existing holes in frame and existing hardware.
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

Mounting instructions:

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Redcat Racing Gen8 Scout II Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

PreRunner Series Rear Bumper Traxxas TRX4 Sport

$59.95 USD

ScalerFab Welded Steel Prerunner Series Rear Bumper for Traxxas TRX4 Sport

Our most popular bumper ever! It's no surprise our scale prerunner-style is a favorite. It's sleek appearance and perfectly wrapped ends make it a must-have for your TRX4 Sport!

Specifications:-
-approx. 200mm overall width
- Adjustable mounting positions/depths - allows for better departure angle over stock
- Mounts using existing holes in frame and requires drilling (2) holes - does not mount like stock plastic bumper(s) - (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

Mounting instructions:

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Traxxas TRX4 Sport PreRunner Series Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Amazing work

Got the trx4 sport front bumper/the rock sliders and the rear bumper and all of them are fantastic the fit perfect look amazing and was all finished in incredible time. If you are in the fence about it don't be cause they are worth it.

Rear Traxxas TRX4 Sport

Love it! Great product, fits and looks great! Will be purchasing more.

Bumpers

Great costumer service made changes after ordered and made it happen flipped mount to rear bumper to make bumper high clearance

👍🏻👍🏻

Excellent fit and design. Will have to see how durable after some use. The wrap around design for the rear corners of the body is awesome. Wish I could submit some photos. Thanks scalerfab!

Perfect fit ,looks awesome, very pleased

Element RC Enduro 1/10 Scale Full-Size Rear Bumper

$49.95 USD

Full-size Steel, welded rear bumper for the Element RC Enduro Sendero/Trailwalker/Trail Runner
***Note Shackle Mounts Option will be tucked under bumper as to not impede with departure angle.

Specifications:
- 207mm wide
- Mounts using existing holes in frame. Does not mount like stock plastic bumper(s) - Longer Hardware recommended (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Element RC Enduro Full-Size Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

PreRunner Element RC Enduro Sendero/Trailwalker Rear Bumper

$64.95 USD

ScalerFab Welded Steel Prerunner Series Rear Bumper for Element RC Enduro Sendero/Original Trailwalker (Black version can be found here)

***NOTE: We recommend trimming body and part of fender flare.

Specifications:-
-approx. 205mm width with wrapped ends
- Adjustable mounting positions/depths - allows for better departure angle over stock
- Mounts using existing holes in frame. Does not mount like stock plastic bumper(s) - Longer Hardware recommended (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

PreRunner Series Element RC Enduro Sendero/Trailwalker Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Prerunner Rear Bumper for Traxxas TRX-6 Mercedes 6x6

$59.95 USD

ScalerFab Welded Steel Prerunner Series Rear Bumper for Traxxas TRX-6 Mercedes-Benz 63 AMG 6x6

Specifications:-
-Approx. 200mm overall width
- Adjustable mounting positions/depths - allows for better departure angle over stock
- Mounts using existing holes in frame- does not mount like stock plastic bumper(s) - (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Prerunner Rear Bumper for Traxxas TRX-6 Mercedes 6x6

Traxxas TRX-6 Mercedes-Benz G 63 AMG 6x6 Prerunner Series Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Rear Bumper for Axial Racing SCX10 III Jeep Wrangler JLU

$49.95 USD

ScalerFab Welded Steel Rear Bumper for Axial SCX10III Jeep Wrangler JLU- License Plate or Hitch Receiver Options Available

The ScalerFab SCX10 III bumpers are designed to work with the stock Axial body post mounting system. Bumpers will not mount with any after-market crossmembers or anything that would interfere with the end of the frame rails.

Specifications:

- Approx. 190mm wide
- Includes mounting hardware (4 button-head screws, 4 nuts, & 4 washers)
- Steel construction - Hand Made/Welded.

Mounting Instructions:

-Bumpers mounts to outside of frame rails, between the plastic fenders and the frame rails.

-Requires drilling one (1) additional hole in plastic fender in order to use both existing holes in frame.

**For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Rear Bumper for Axial Racing SCX10 III Jeep Wrangler JLU - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Rear Bumper For Axial Racing SCX10 III Jeep Gladiator

$49.95 USD

ScalerFab Welded Steel Rear Bumper for Axial SCX10III Jeep Gladiator

License Plate or Hitch Receiver Options Available

Level up your RC jeep with some sweet armor - because let's be real, protection is crucial. And we've got your back (literally).

The ScalerFab SCX10 III bumpers are designed to work with the stock Axial body post mounting system. Bumpers will not mount with any after-market crossmembers or anything that would interfere with the end of the frame rails.

Specifications:

- Approx. 190mm wide
- Includes mounting hardware (4 button-head screws, 4 nuts, & 4 washers)
- Steel construction - Hand Made/Welded.

Mounting Instructions:

-Bumpers mounts to outside of frame rails, between the plastic fenders and the frame rails.

-Requires drilling one (1) additional hole in plastic fender in order to use both existing holes in frame.

**For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Rear Bumper For Axial Racing SCX10 III Jeep Gladiator - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Gladiator rear bumper

Really love the designs and the easy fit of all Scalerfab Bumpers, rocksliders etc. Looks really cool on my Gladiator. Thanks again for making awesome stuff for our hobby.

Rear Bumper For Axial Racing SCX10 III Jeep Gladiator

SCX10.3 Bumpers and Sliders

Awesome quality and great fitment. Can’t go wrong rocking with ScalerFab

Retro Series Axial SCX10 III Bronco Rear Bumper

$59.95 USD

The Retro Series features double tube work for that classic, old-school look! Pairs perfectly with the Retro Series Front Bumper HERE

ScalerFab Welded Steel Prerunner Series Rear Bumper for Axial SCX10 III Bronco

Specifications:-
- 215mm Wide
- Requires drilling one (1) additional hole in plastic fender in order to use both existing holes in frame.
- Longer Mounting Hardware Included (4 button head screws, 4 washers, 4 nuts).
- Steel construction - Hand Made/Welded.

**For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: not as susceptible to chips

-Rustoleum Truck Bed Coating: easier to touch up using a can of Rustoleum Truck Bed Coating, available here: link text

Mounting Instructions:

-Bumpers mounts to outside of frame rails, between the plastic fenders and the frame rails.

-Requires drilling one (1) additional hole in plastic fender in order to use both existing holes in frame.

**For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Retro Series Axial SCX10 III Bronco Rear Bumper

Element RC Enduro Knightrunner Trail Truck 1/10 Scale Full-Size Rear Bumper

$49.95 USD

Full-size Steel, welded rear bumper for the Element RC Enduro Knightrunner

Specifications:
- _____ wide
- Mounts using existing holes in frame. Does not mount like stock plastic bumper(s) - Longer Hardware recommended (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: not as susceptible to chips

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Element RC Enduro Knightrunner Trail Truck 1/10 Scale Full-Size Rear Bumper

PreRunner Series Element RC Enduro Knightrunner Trail Truck Rear Bumper

$64.95 USD

ScalerFab Welded Steel Prerunner Series Rear Bumper for Element RC Enduro Knightrunner Trail Truck

Specifications:-
-approx. 205mm width with wrapped ends
- Adjustable mounting positions/depths - allows for better departure angle over stock
- Mounts using existing holes in frame. Does not mount like stock plastic bumper(s) - Longer Hardware recommended (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: not as susceptible to chips

-Rustoleum Truck Bed Coating: Superficial coating - chips easily, but is easier to touch up using a can of Rustoleum Truck Bed Coating, available here: HERE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

PreRunner Series Element RC Enduro Knightrunner Trail Truck Rear Bumper

Prerunner Series Axial SCX10 III Base Camp Rear Bumper

$59.95 USD

MOST POPULAR SERIES!

The Prerunner series was designed for a combination of looks and performance under scale use and it a perfect fit for the Axial SCX10 III Base Camp! The tube work wraps the body perfectly for an ultra scale look coupled with a bit of body protection.

Full-width Steel, welded Prerunner Series Rear Bumper for the Axial Adventure SCX10III Base Camp

Specifications:-
- Approx. 200mm wide with wrapped ends.
- Longer Mounting Hardware Included (4 button head screws, 4 washers, 4 nuts).
- Steel construction - Hand Made/Welded.

**For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use.

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own.

-Flat Black: matte black finish.

-Rustoleum Truck Bed Coating: OUT OF STOCK, no longer available.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Prerunner Series Axial SCX10 III Base Camp Rear Bumper

Wrong

I've received the same wrong bumper twice

Great Quality

I ordered the prerunner front and rear bumper for axial SCX10III base camp and I love its quality and strength. Great product !

AMAZING PRODUCT!!!

This product is super high quality and makes the basecamp look amazing!!

These parts are incredible

Amazing bumper.

Great rear bumper! Looks absolutely stunning on the basecamp. Only issue is the gap from the frame rails to the tabs. Once tightened down, it was fine.

1 2

Rear Bumper For Axial Racing SCX10 III Base Camp

$49.95 USD

ScalerFab Full-Width Welded Steel Rear Bumper for the Axial SCX10III Base Camp

Add a little scale to your RC! This classic style bumper offers a series of customized options. Add a license plate recess or hitch receiver for an ultra scale appearance.

Specifications:

- Approx. 200mm wide
- Includes mounting hardware (4 button-head screws, 4 nuts, & 4 washers)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Flat Black: not as susceptible to chips

Raw Steel: We recommend a raw steel finish if you intend to coat with a harder finish on your own.

Mounting instructions:

We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

**For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Rear Bumper For Axial Racing SCX10 III Base Camp

PreRunner Series Rear Bumper for Traxxas TRX4 Bronco

$59.95 USD

ScalerFab Welded Steel Prerunner Series Rear Bumper for Traxxas TRX4 Bronco

Specifications:-
- Requires slight body trimming
- Approx. 200mm overall width with 15mm wrapped ends
- Adjustable mounting positions/depths - allows for better departure angle over stock
- Mounts using existing holes in frame and requires drilling (2) holes - does not mount like stock plastic bumper(s) - (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own.

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

PreRunner Series Rear Bumper for Traxxas TRX4 Bronco

Retro Series Vanquish VS4-10 Phoenix Rear Bumper

$59.95 USD

The Retro Series features double tube work for that classic, old-school look!

ScalerFab Welded Steel Prerunner Series Rear Bumper for
Vanquish VS4-10 Phoenix

Specifications:-
- Adjustable mounting positions/depths - allows for better departure angle.
- Mounts using existing holes in frame- (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Retro Series Vanquish VS4-10 Phoenix Rear Bumper

Almost perfect

Scaler fab bumpers rock! Great ,quality bumpers but I was a little sad this time. I requested a custom width and got the full width bumper so it's wider than my entire truck and just doesn't look right to me. 4 of 5 bumpers purchased ARE perfect though and I absolutely love them.

Holy smokes

These bumpers are beautiful. Couldn’t wait to get it on my truck. They did not disappoint. Don’t think…add to cart.

Nice

Was a lil tight to get on but it fit and works great

My Phoenix

The bumpers look awesome.. they fit perfectly

Vanquish VS4-10 Phoenix Rear Bumper

$53.95 USD

ScalerFab Welded Steel Rear Bumper for the Vanquish VS4-10 Phoenix

Transform your vehicle with the Vanquish VS4-10 Phoenix Rear Bumper! With its sleek design and enhanced performance, this upgrade is sure to make a statement. Rise from the ashes and conquer any terrain with confidence. Upgrade now for an unbeatable driving experience!

Specifications:-
- Adjustable mounting positions/depths - allows for better departure angle.
- Mounts using existing holes in frame - (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Best bumpers on the market

The bumpers I ordered were amazing, great quality and the make my vs410 Phoenix look sick. I recommend the bumpers from this company to everyone because they are great.

Love my products fit perfectly and looks amazing on the Rig!

Fab Scalerfab

Great craftsmanship, delivery time and service! Loving the look of my Pheonix now, Cheers Scalerfab.

PreRunner Element RC Enduro Trailwalker Black Rear Bumper

$64.95 USD

ScalerFab Welded Steel Prerunner Series Rear Bumper for Element RC Enduro Trailwalker Black

***NOTE: This is different than the original Trailwalker prerunner rear. The Black edition requires shorter brackets.