Search Results

ScalerFab Welded Steel Prerunner Series Rear Bumper for Traxxas TRX4 Defender 90! Specifications:--230mm overall width- Adjustable mounting positions/depths - allows for better departure angle over stock- Mounts using existing holes in frame- does not mount like stock plastic bumper(s) - (hardware not included)- Steel construction - Hand Made/Welded. **Please Note: Our finish options...

ScalerFab Welded Steel Prerunner Series Front Bumper for Redcat Everest (Gen 7/ Gen 7 Pro) Specifications:- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) - see photos (Longer hardware recommended- hardware not included)- Steel construction - Hand Made/Welded.- Has slots for adjustable fore/aft mounting **Please Note: Our finish...

ScalerFab Welded Steel Prerunner Series Rear Bumper for Redcat Everest Gen 7/ Gen 7 Pro Specifications:- Adjustable mounting positions/depths - allows for better departure angle over stock- Mounts using existing holes in frame and requires drilling (2) holes - does not mount like stock plastic bumper(s) - (hardware not included)- Steel construction - Hand Made/Welded....

Improve approach angle and performance over stock with our Welded Steel Prerunner Series Front Bumper for Redcat Racing Gen8 Scout II Specifications:- 207mm- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) - see photos (Longer hardware recommended- hardware not included)- Steel construction - Hand Made/Welded.- Has slots...

ScalerFab Welded Steel Prerunner Series Rear Bumper for Redcat Racing Gen8 Scout II Specifications:--220mm width including wrapped ends- Adjustable mounting positions/depths - allows for better departure angle over stock- Mounts using existing holes in frame and requires drilling (2) holes - does not mount like stock plastic bumper(s) - (hardware not included)- Steel...

ScalerFab Welded Steel Prerunner Series Rear Bumper for Traxxas TRX-6 Mercedes-Benz 63 AMG 6x6 Specifications:--Approx. 200mm overall width- Adjustable mounting positions/depths - allows for better departure angle over stock- Mounts using existing holes in frame- does not mount like stock plastic bumper(s) - (hardware not included)- Steel construction - Hand Made/Welded. **Please Note:...

ScalerFab Welded Steel Prerunner Series Element RC Enduro Trailwalker Front Bumper Improved approach angle over stock***NOTE selecting the shackle mounts option will decrease approach angle and performance, as they will stick out slightly from the front edge of the bumper. Specifications:- 200mm wide- Will not fit a bumper-mounted winch- Mounts using...

Full-size Steel, welded Prerunner Series Front Bumper for the SCX10/ SCX10 2 XJ Body- (Also fits on the Traxxas TRX4 Chassis with the XJ body) ALSO FITS THE PRO-LINE 4-Runner body WITH the plastic front bumper. If removing plastic front bumper, see the Honcho Raised Prerunner Series bumper and add custom...

ScalerFab Comp-Style Pro Series Welded Steel Narrow Front Bumper w/ Trail Bar for Axial SCX10/SCX10 II Jeep Rubicon, CRC Wrangler Unlimited, Deadbolt/G6, etc. Bumper fits tight to the frame for the best approach angle possible and will not work with a bumper-mounted winch. Sits even with the top of the frame...

ScalerFab Pro Series Welded Steel Narrow Front Bumper w/ Trail Bar for Axial SCX10/SCX10 II Jeep Rubicon, CRC Wrangler Unlimited, Deadbolt/G6, etc. Sits even with the top of the frame rails. For RAISED brackets (+20mm above top of frame rails), see our selection HERE *Additional Options may be available one...

ScalerFab Welded Steel Narrow Front Bumper for Redcat Everest (Gen 7 & Gen 7 Pro) with Stinger. **Some pictures may depict optional add-ons. Winch not included. Specifications: - 115mm wide- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and 8274 Winch, 3Racing Winch, and SSD Ox Power Winch mounting pattern)- Mounts using...

ScalerFab Pro Series Full-Size Front Bumper with Trail Bar for Traxxas TRX4 Blazer **Some pictures may depict optional add-ons. Grab the pro series look for your Traxxas TRX4 Blazer/K10/F150 with this full-width front bumper with an added Trail Bar by ScalerFab for extra defense against the toughest obstacles! It offers...

RC4WD C2X Rock Sliders w/ Optional Skid Plates Steel Rock Sliders made specifically for the RC4WD C2X. Specifications:-Approx. 175mm long x 40mm angled offset (Front slightly shorter than body to avoid rubbing when at full turn/compression) -Angled to raise to body line -Mounts by screwing 4 button screws into the underside of...

ScalerFab Welded Steel Pro Series Narrow Raised Front Bumper with Trail Bar for Axial SCX10 Honcho/Pro-Line SR5 Body(Optional Fairlead Mount Shown) **Some pictures may depict optional add-ons. Winch not included. Specifications:- 115mm wide- Requires trimming of plastic bumper for Pro-Line SR5 Body- Laser-cut Gussets added for strength and added scale...

ScalerFab Welded Steel Pro Series Narrow Front Bumper w/ Trail Bar or Stinger for Traxxas TRX4 Chevrolet K5 Blazer, K10 truck, and Ford F-150 Truck Make your Traxxas look cooler than a 70's disco party with this Pro Series Narrow Front Bumper. With sturdy construction and gussets for added strength and...

ScalerFab Welded Steel Rear Bumper for Axial SCX10 Jeep Rubicon. Upgrade your SCX10 Jeep Rubicon with our rear bumper, featuring classic jeep styling and tough Scalerfab armor for ultimate protection. Dominate any terrain with confidence and style. Specifications:--190mm width- Adjustable mounting positions/depths - allows for better departure angle over stock, or...

ScalerFab Comp-Style Pro Series Welded Steel Narrow Front Bumper w/ Stinger for Axial SCX10/SCX10 II Jeep Rubicon, CRC Wrangler Unlimited, Deadbolt/G6, etc. Sits even with the top of the frame rails. For RAISED brackets (+20mm above top of frame rails), see our selection HERE *Additional Options may be available one...

ScalerFab Welded Steel Pro Series Narrow Raised Front Bumper with Stinger for Axial SCX10 Honcho/Pro-Line SR5 Body(Optional Fairlead Mount Shown) **Some pictures may depict optional add-ons. Winch not included. Specifications:- 115mm wide- Requires trimming of plastic bumper for Pro-Line SR5 Body- Laser-cut Gussets added for strength and added scale appearance-...

Our most popular series has made it to the Vanquish VS4-10! The Prerunner series was designed for a combination of looks and performance under scale use. Made from 3/16" rod, the Prerunner Front Bumper for the VS4-10 is a low-profile, scale trail armor option. Full-size Steel, welded Prerunner Series Front Bumper for...

ScalerFab Prerunner Series Welded Steel Rear Bumper for Axial SCX10/SCX10 II Deadbolt/G6. Specifications:-130mm width- Mounts using existing holes in frame and requires drilling (2) holes or enlarging (2) existing holes for secure mounting (hardware not included)- Steel construction - Hand Made/Welded. **Please Note: Our finish options provide a superficial coating and will...