Search Results

ScalerFab Comp-Style Pro Series Welded Steel Narrow Front Bumper w/ Stinger for Axial SCX10/SCX10 II Jeep Rubicon, CRC Wrangler Unlimited, Deadbolt/G6, etc. Bumper fits tight to the frame for the best approach angle possible and will not work with a bumper-mounted winch. Sits even with the top of the frame rails....

RC4WD Trail Finder 2 (TF2/TF2 LWB) Double Bar Rock SlidersSteel Frame-mounted Double Rock Sliders for RC4WD Trail Finder 2 Mohave, Marlin, and LWB Mojave bodies. *Main bar approx. 160mm long x 45mm offset from frame rails (LWB approx. 185mm x 43mm offset) *Mounts using existing holes in frame (hardware not included) - see photos * Steel...

Steel Welded Rear Bumper for a Axial SCX10 Power Wagon. ***Body will need to be trimmed for custom fit. ***Some Photos depict optional Add-ons, which may be an additional cost. Upgrade your RC with the best! The SCX10 Power Wagon Rear Bumper offers both scale appearance and top-notch performance. Don't settle...

ScalerFab Welded Steel Prerunner Series Element RC Enduro Sendero/Sendero HD Front Bumper Take your RC adventures to the next level with the Prerunner Element RC Enduro Utron Trail Truck Front Bumper. Featuring prerunner style bar work for a realistic and sleek appearance, as well as improved light performance for epic crawling....

Full-size Steel, welded rear bumper for the Element RC Enduro Utron Trail Truck***Note Shackle Mounts Option will be tucked under bumper as to not impede with departure angle. Specifications:- 217mm wide- Mounts using existing holes in frame. Does not mount like stock plastic bumper(s) - Longer Hardware recommended (hardware not included)-...

ScalerFab Welded Steel Narrow Front Bumper w/ Trail Bar for Traxxas TRX-4 Defender 90 Adjustable Mounting Options: -Mount with stock body post location by cutting 2 small slits in the body to accommodate the mounting brackets (see picture) -Mount with body posts 1 hole higher (5mm) without cutting body- also allows for...

ScalerFab Welded Steel Prerunner Series Rear Bumper for Element RC Enduro Sendero/Original Trailwalker (Black version can be found here) ***NOTE: We recommend trimming body and part of fender flare. Specifications:--approx. 205mm width with wrapped ends- Adjustable mounting positions/depths - allows for better departure angle over stock- Mounts using existing holes in...

ScalerFab Welded Steel Prerunner Series Rear Bumper for Element RC Enduro Trailwalker Black ***NOTE: This is different than the original Trailwalker prerunner rear. The Black edition requires shorter brackets. Specifications:--approx. 205mm width with wrapped ends- Adjustable mounting positions/depths - allows for better departure angle over stock- Mounts using existing holes in...

ScalerFab Welded Steel Prerunner Series Rear Bumper for Element RC Enduro Sendero SE ***NOTE: This item is specifically made for the SE. Original or HD version can be found HERE Specifications:--approx. 205mm width with wrapped ends- Adjustable mounting positions/depths - allows for better departure angle over stock- Mounts using existing holes...

ScalerFab Welded Steel Narrow Front Bumper w/ Trail Bar for VS4-10 Phoenix **READ MOUNTING INSTRUCTIONS** Specifications: - 78mm wide (74mm inside to inside bracket measurement)- Includes 3/8 rod extended mounting rod with predrilled hole for normal stock body mounting with bumper.- Steel construction - Hand Made/Welded. Mounting instructions: - Bumper mounts against the...

ScalerFab Welded Steel Narrow Front Bumper w/ Trail Bar or Stinger for Traxxas TRX4 Chevrolet K5 Blazer, K10 truck, and Ford F-150 Truck Go off-roading with confidence in your Traxxas TRX-4 1970's Series (K5 Blazer/K10 Truck/F150) with the Narrow Front Bumper with Trail Bar from ScalerFab. Conquer any terrain with...

Full-size Steel, welded front bumper for the Element Eduro Sendero/Sendero HD.*Pictures depict optional add-ons Specifications:-205mm wide-Bumper is not made to fit a bumper-mounted winch. This model is built to give the best approach angle possible for this full-size option. Shown with optional front fairlead mount for servo winch.- Mounts using existing...

Scale looks abound in our latest release for the new Axial Adventure SCX10 III Base Camp Truck! This Low-Profile Prerunner bumper was designed to fit slightly larger-than-stock tire applications. The width is even with the edges of the body. Full-width Steel, welded Prerunner Series Front Bumper for the SCX10 III...

ScalerFab Welded Steel Incognito Element RC Enduro Trailwalker Front Bumper The same approach angle as not running a bumper at all, but with all the protection and scale points of a metal front bumper! Specifications:- 200mm wide- Will not fit a bumper-mounted winch.- Mounts using existing holes in frame - does not mount like...

ScalerFab Welded Steel Prerunner Series Rear Bumper for Element RC Enduro Utron Trail Truck Conquer any trail with the PreRunner Element RC Enduro Utron Trail Truck Rear Bumper! Its Prerunner style and tight tuck feature provide the ultimate departure angle and scale appearance. Gear up for adventure and take on...

ScalerFab Welded Steel Narrow Raised Front Bumper with Trail Bar for Axial SCX10 Honcho/Pro-Line SR5(Optional Fairlead Mount Shown) **Some pictures may depict optional add-ons. Winch not included. Specifications:- Requires trimming of plastic bumper for Pro-Line SR5 Body- Mounts using existing holes in frame - does not mount like stock plastic bumper(s)...

ScalerFab Welded Steel Rear Bumper for Axial SCX10 Honcho. Enhance the appearance and performance of your trail rig with this SCX10 Honcho Rear Bumper. This scale accessory adds a touch of ruggedness and style to your vehicle, surpassing the limitations of the stock bumper. Upgrade with confidence and achieve the ultimate...

ScalerFab Welded Steel Narrow Front Bumper w/ Trail Bar for Axial SCX10/SCX10 II Jeep Rubicon, CRC Wrangler Unlimited, Deadbolt/G6, etc. Sits even with the top of the frame rails. For RAISED brackets (+20mm above top of frame rails), see our selection HERE **Some pictures may depict optional add-ons. Winch not...

ScalerFab Welded Steel Rear Bumper for Axial SCX10 Deadbolt/G6. Take your RC to the next level with the ScalerFab Deadbolt/G6 Rear Bumper! Increase your style and performance with one of our most popular items for this platform. Dominate on any terrain and stand out from the pack. Upgrade now and...

Welded Steel Hitch for Axial SCX10 * Mounts using existing holes and requires drilling (2) holes (hardware not included) * Steel construction - welded. * Comes with a HPI 4.8mm Ball Stud installed (welded) and (1) Lunsford 4.8mm Super Duty Ball Cup for Trailer * Comes with Safety Chain Loops *Painted in Rustoleum Truck Bed Coating