Comp-Style Front Bumper for Axial Racing SCX10 III Base Camp
Comp-Style Front Bumper for Axial Racing SCX10 III Base Camp
Comp-Style Front Bumper for Axial Racing SCX10 III Base Camp
Comp-Style Front Bumper for Axial Racing SCX10 III Base Camp
Comp-Style Front Bumper for Axial Racing SCX10 III Base Camp
Comp-Style Front Bumper for Axial Racing SCX10 III Base Camp
Comp-Style Front Bumper for Axial Racing SCX10 III Base Camp
Comp-Style Front Bumper for Axial Racing SCX10 III Base Camp
Comp-Style Front Bumper for Axial Racing SCX10 III Base Camp
Comp-Style Front Bumper for Axial Racing SCX10 III Base Camp
Comp-Style Front Bumper for Axial Racing SCX10 III Base Camp
Comp-Style Front Bumper for Axial Racing SCX10 III Base Camp
Comp-Style Front Bumper for Axial Racing SCX10 III Base Camp
Comp-Style Front Bumper for Axial Racing SCX10 III Base Camp

Comp-Style Front Bumper for Axial Racing SCX10 III Base Camp

$60.95 USD
-4 in stock

Our most low-profile bumper with the best possible approach angle is here for the Axial Adventure SCX10III Base Camp!


RC Scale Welded Steel Ultra Low-Profile Comp-Style Front Bumper


Specifications:

- approx. 79mm wide (Just a bit wider than the frame rails)
- Raised approx. 20mm above the top corner of the frame rails to close body gap
- no fore/aft adjustment
- Bumper fits tight to the frame for the best possible approach angle.
- Steel construction - Hand Made/Welded.
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: not as susceptible to chips

Mounting Instructions:

1. Bumper is made to slide inside the c-channel of the frame rails. 

2. Back screws with a washer and nut.

 

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc. 

 If you have an issue with your item, please email Scalerfab with detailed information at

orders@scalerfab.com

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights.)

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
Donald

Wow! These are nice. Quality. Really tell someone has a love for this. Highly recommended.

You may also like

Quick View
Prerunner Series Axial SCX10 III Base Camp Rear Bumper
from $61.95 USD
Quick View
Adjustable Bolt-On Rock Sliders for Axial Racing SCX10 III Base Camp
from $36.45 USD
Quick View
Prerunner Series SCX10 III Base Camp Front Bumper
from $76.45 USD
Quick View
Low-Profile Prerunner Series SCX10 III Base Camp Front Bumper
from $76.45 USD
Quick View
Axial Adventure SCX10 III Base Camp Roll Bar
from $36.45 USD

Prerunner Series Axial SCX10 III Base Camp Rear Bumper

$61.95 USD
MOST POPULAR SERIES!
The Prerunner series was designed for a combination of looks and performance under scale use and it a perfect fit for the Axial SCX10 III Base Camp! The tube work wraps the body perfectly for an ultra scale look coupled with a bit of body protection. 
Full-width Steel, welded Prerunner Series Rear Bumper for the Axial Adventure SCX10III Base Camp

Specifications:-
- Approx. 200mm wide with wrapped ends.
- Steel construction - Hand Made/Welded.

**For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

 
Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use.

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own.

-Flat Black: matte black finish.

-Rustoleum Truck Bed Coating: OUT OF STOCK, no longer available.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc. 

 If you have an issue with your item, please email Scalerfab with detailed information at

orders@scalerfab.com

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights.)

Prerunner Series Axial SCX10 III Base Camp Rear Bumper
Prerunner Series Axial SCX10 III Base Camp Rear Bumper
Prerunner Series Axial SCX10 III Base Camp Rear Bumper
Prerunner Series Axial SCX10 III Base Camp Rear Bumper
Prerunner Series Axial SCX10 III Base Camp Rear Bumper
Prerunner Series Axial SCX10 III Base Camp Rear Bumper
Prerunner Series Axial SCX10 III Base Camp Rear Bumper
Prerunner Series Axial SCX10 III Base Camp Rear Bumper
Prerunner Series Axial SCX10 III Base Camp Rear Bumper
Prerunner Series Axial SCX10 III Base Camp Rear Bumper
Prerunner Series Axial SCX10 III Base Camp Rear Bumper
Prerunner Series Axial SCX10 III Base Camp Rear Bumper
Prerunner Series Axial SCX10 III Base Camp Rear Bumper
Prerunner Series Axial SCX10 III Base Camp Rear Bumper

Customer Reviews

Based on 9 reviews
67%
(6)
11%
(1)
0%
(0)
0%
(0)
22%
(2)
W
William
Resolving issues suck

I ordered front and rear bumpers and sliders for one of my rigs. They all showed up except the rear bumper was the wrong style so I sent it back and he sent me another rear bumper. The style was correct but I was missing some of the add-ons that I had asked for and paid for. I also wanted it in raw steel and it came powder coated black. When I reached back out to him about this, I heard nothing back in total. I sent three emails about this to him and never heard anything back until one day I saw I got a refund for $10. All I want is the bumper I ordered and he did not want to take care of an honest mistake that happens not returning emails not communicating just keeping my $60.

R
R.N.

Great heavy duty rear bumper, have the fromt bumper to match. Only reason not giving full 5 star is the bottom bar isnt fully coated in the paint and you can see the bare steel. Other than that great product

B
Bryan Krauss

Strong and well built. Looks great and is definitely an up grade from my old metal bumper

J
John Smith
Wrong

I've received the same wrong bumper twice

J
John Smith
Great Quality

I ordered the prerunner front and rear bumper for axial SCX10III base camp and I love its quality and strength. Great product !

User picture User picture
12

Adjustable Bolt-On Rock Sliders for Axial Racing SCX10 III Base Camp

$36.45 USD

ScalerFab Steel Axial Racing SCX10III Base Camp Adjustable, Bolt- On Rock Sliders
Steel Frame-mounted Rock Sliders w/ Optional Add-Ons (Shown in pictures) slide right into the stock slot location of the plastic skid plate to replace the stock rock sliders.

(MADE FOR STOCK VEHICLE- Any modifications may affect clearance of front tires. Request custom length and specify measurement from front stock bolt location forward in order notes at checkout, if needed.)

Mounting Recommendations:
-Use 3rd hole on the brackets in stock mounting location

Specifications:
* 160mm length, adjustable offset.
* Mounts using existing holes in stock skid plate.
* Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use.

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own.

-Flat Black: matte black finish.

-Rustoleum Truck Bed Coating: OUT OF STOCK, no longer available.

 

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc. 

 If you have an issue with your item, please email Scalerfab with detailed information at

orders@scalerfab.com

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights.)

Adjustable Bolt-On Rock Sliders for Axial Racing SCX10 III Base Camp
Adjustable Bolt-On Rock Sliders for Axial Racing SCX10 III Base Camp
ScalerFab Steel Adjustable, Bolt-On Rock Sliders for Axial Racing SCX10 III Jeep Wrangler JLU - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby
Adjustable Bolt-On Rock Sliders for Axial Racing SCX10 III Base Camp
Adjustable Bolt-On Rock Sliders for Axial Racing SCX10 III Base Camp
Adjustable Bolt-On Rock Sliders for Axial Racing SCX10 III Base Camp
Adjustable Bolt-On Rock Sliders for Axial Racing SCX10 III Base Camp
Adjustable Bolt-On Rock Sliders for Axial Racing SCX10 III Base Camp
Adjustable Bolt-On Rock Sliders for Axial Racing SCX10 III Base Camp
Adjustable Bolt-On Rock Sliders for Axial Racing SCX10 III Base Camp
Adjustable Bolt-On Rock Sliders for Axial Racing SCX10 III Base Camp
ScalerFab Steel Adjustable, Bolt-On Rock Sliders for Axial Racing SCX10 III Jeep Wrangler JLU - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby
Adjustable Bolt-On Rock Sliders for Axial Racing SCX10 III Base Camp
Adjustable Bolt-On Rock Sliders for Axial Racing SCX10 III Base Camp
Adjustable Bolt-On Rock Sliders for Axial Racing SCX10 III Base Camp
Adjustable Bolt-On Rock Sliders for Axial Racing SCX10 III Base Camp
Adjustable Bolt-On Rock Sliders for Axial Racing SCX10 III Base Camp
Adjustable Bolt-On Rock Sliders for Axial Racing SCX10 III Base Camp

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
Donald

Wow. Amazing. Great workmanship and quality. Can tell someone has a love for this. Will buy from again.

J
Juan Moncada
Really nice job

I'm happy with the finish of the pieces did a custom one and all the measures came right on the dot installed on my FMS LC80

N
Nathan

So awesome

D
Drew Goodell
Amazing products

Got some custom parts made for my Axial Basecamp. Sliders and roll bar, came out better than I could have imagined. Excellent product.

Prerunner Series SCX10 III Base Camp Front Bumper

$76.45 USD
Scale looks abound in our latest release for the new Axial Adventure SCX10 III Base Camp Truck!
The Prerunner series was designed for a combination of looks and performance under scale use. Made from 3/16" rod, the Prerunner Front Bumper for the SCX10 III Base Camp is a low-profile and scale trail armor option.
Full-width Steel, welded Prerunner Series Front Bumper
for the SCX10 III Base Camp
(MADE FOR STOCK VEHICLE- Any modifications may affect clearance. See our low-profile prerunner bumper HERE if running larger tires or adjusting shocks lower)

Specifications:
-Approx. 198mm wide. Wrapped ends match width/angle of body.
- Steel construction - Hand Made/Welded.
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel.

 **Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: not as susceptible to chips

Mounting Instructions:

1. Bumper is made to slide inside the c-channel of the frame rails. 
2. Use washers (included) or spacer (not included) between steering link and frame rails. Use longer screws (included). Back screws with a washer and nut.

 

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc. 

 If you have an issue with your item, please email Scalerfab with detailed information at

orders@scalerfab.com

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights.)

Prerunner Series SCX10 III Base Camp Front Bumper
Prerunner Series SCX10 III Base Camp Front Bumper
Prerunner Series SCX10 III Base Camp Front Bumper
Prerunner Series SCX10 III Base Camp Front Bumper
Prerunner Series SCX10 III Base Camp Front Bumper
Prerunner Series SCX10 III Base Camp Front Bumper
Prerunner Series SCX10 III Base Camp Front Bumper
Prerunner Series SCX10 III Base Camp Front Bumper
Prerunner Series SCX10 III Base Camp Front Bumper
Prerunner Series SCX10 III Base Camp Front Bumper
Prerunner Series SCX10 III Base Camp Front Bumper
Prerunner Series SCX10 III Base Camp Front Bumper

Customer Reviews

Based on 5 reviews
80%
(4)
20%
(1)
0%
(0)
0%
(0)
0%
(0)
D
Daniel J Alex
Pre runner bumper

I absolutely love it! The quality of the craftsmanship is incredible!

User picture
J
J.E.
AMAZING!!

I went with the flat black w/ shackle mounts, and man it looks gorgeous on the basecamp.

N
Nathan Ross

Awesome bumpers

T
Terry Cooper
Amazing bumper.

Perfect fit! Only issue was at full compression, the MTR’s would catch on the sides, some minor trimming and no more issue. Would highly recommend as it made the basecamp look awesome.

User picture
K
Kyle Mcneil

Great quality craftsmanship. Super stoked! Took a bit once ordered to finally ship but again, great craftsmanship.

Low-Profile Prerunner Series SCX10 III Base Camp Front Bumper

$76.45 USD
Scale looks abound in our latest release for the new Axial Adventure SCX10 III Base Camp Truck!
This Low-Profile Prerunner bumper was designed to fit slightly larger-than-stock tire applications. The width is even with the edges of the body. 
Full-width Steel, welded Prerunner Series Front Bumper
for the SCX10 III Base Camp

Specifications:
- Made from 3/16" rod.
- Approx. 170mm wide. 
- Steel construction - Hand Made/Welded.
- Does not fit a winch.
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel.

 **Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: not as susceptible to chips

Mounting Instructions:

1. Bumper is made to slide inside the c-channel of the frame rails. 
2. Use washers (included) or spacer (not included) between steering link and frame rails. Use longer screws (included). Back screws with a washer and nut. Does not require use of SCX10 III body-post mounting system.

 

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc. 

 If you have an issue with your item, please email Scalerfab with detailed information at

orders@scalerfab.com

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights.)

Low-Profile Prerunner Series SCX10 III Base Camp Front Bumper
Low-Profile Prerunner Series SCX10 III Base Camp Front Bumper
Low-Profile Prerunner Series SCX10 III Base Camp Front Bumper
Low-Profile Prerunner Series SCX10 III Base Camp Front Bumper
Low-Profile Prerunner Series SCX10 III Base Camp Front Bumper
Low-Profile Prerunner Series SCX10 III Base Camp Front Bumper
Low-Profile Prerunner Series SCX10 III Base Camp Front Bumper
Low-Profile Prerunner Series SCX10 III Base Camp Front Bumper
Low-Profile Prerunner Series SCX10 III Base Camp Front Bumper
Low-Profile Prerunner Series SCX10 III Base Camp Front Bumper
Low-Profile Prerunner Series SCX10 III Base Camp Front Bumper
Low-Profile Prerunner Series SCX10 III Base Camp Front Bumper
Low-Profile Prerunner Series SCX10 III Base Camp Front Bumper
Low-Profile Prerunner Series SCX10 III Base Camp Front Bumper
Low-Profile Prerunner Series SCX10 III Base Camp Front Bumper
Low-Profile Prerunner Series SCX10 III Base Camp Front Bumper

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
S
Samuel

Great bumper

A
Alexander Costanzo
Perfect fit!

I'll be honest, ended up using this on my scx10.3 with an aftermarket proline body instead of the factory "Toyota" truck. Man does it look amazing! I went for shackle mounts and a front winch fairlead. The full set of front and rear bumpers plus rock sliders is absolutely beautiful. Haven't gotten a chance to run it yet, but they seem very strong, great quality welds.

User picture

Axial Adventure SCX10 III Base Camp Roll Bar

$36.45 USD

Protect your rig and look cool doing it! This is the brand new, just released ScalerFab Element RC Enduro Sendero Roll Bar. Simple, yet strong and full of SCALE! 

ScalerFab Axial Adventure SCX10 III Base Camp Roll Bar

Specifications:
-Hand-welded steel 3/16 rod
-Approx. 50mm tall x 185mm wide
-Angled slightly towards body to close body gap.
-Mounts by drilling 4 holes into truck bed, hardware not included. (*Requires four (4) 3mm x 8mm screws w/ nuts.)

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc. 

 If you have an issue with your item, please email Scalerfab with detailed information at

orders@scalerfab.com

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights.)

Axial Adventure SCX10 III Base Camp Roll Bar
Axial Adventure SCX10 III Base Camp Roll Bar
Axial Adventure SCX10 III Base Camp Roll Bar
Axial Adventure SCX10 III Base Camp Roll Bar
Axial Adventure SCX10 III Base Camp Roll Bar
Axial Adventure SCX10 III Base Camp Roll Bar
Axial Adventure SCX10 III Base Camp Roll Bar
Axial Adventure SCX10 III Base Camp Roll Bar

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
L
Leonard Boss
Cool and well made.

Great quality and value. Looks great, didn’t come with the hardware, but that really wasn’t an issue.

Back to Axial SCX10 III Base Camp