11 products
Narrow Winch Front Bumper for Axial Racing SCX10 III Jeep Wrangler JLU/Gladiator
Regular price $57.95 USD
ScalerFab Welded Steel Narrow Winch Front Bumper for Axial SCX10III Jeep Wrangler JLU/Gladiator- Trail Bar & Stinger options available.
(For the SCX10 III Bronco Winch Front Bumper, Click HERE)
*This bumper is made for a bumper-mounted winch and includes pre-drilled holes with the RC4WD Warn Winch pattern. Click for Low-Profile Narrow Bumper without winch holes.
TO MOUNT WINCH: You will need to flip the winch mounting plate in order to install on bumper.
The ScalerFab SCX10 III bumpers are designed to work with the stock Axial body post mounting system. Bumpers will not mount with any after-market crossmembers or anything that would interfere with the end of the frame rails.
Specifications:
- 115mm wide
- Includes mounting hardware (4 button-head screws, 4 nuts, & 6 washers)
- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and 8274 Winch, 3Racing Winch, and SSD Ox Power Winch mounting pattern)
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s)
- Steel construction - Hand Made/Welded.
- No fore/aft adjustment
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel.
Mounting Instructions:
1. Bumper is made to slide inside the C-channel of the frame rails.
2. Using included screws, mount by matching holes in the body post mount with holes in the brackets and frame rails, as shown below. *Use included washer between frame rails and body post mount as a spacer.
3. Back screws with a washer and nut.
Lifetime Warranty Info
ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.
If you have an issue with your item, please leave detailed info below or you can mail in with info.
Items for warranty repair/replacement can should be mailed to:
ScalerFab, Inc
PO Box 130
Divide, CO 80814
Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)
Adjustable, Bolt-On Rock Sliders for Axial Racing SCX10 III Jeep Wrangler JLU
Regular price $39.95 USDScalerFab Steel Axial Racing SCX10III Adjustable, Bolt- On Rock Sliders
Steel Frame-mounted Rock Sliders w/ Optional Add-Ons (Shown in pictures) mount directly to the stock location of the plastic skid plate to replace the stock rock sliders.
Mounting Recommendations:
-Use first hole on front bracket, and second hole on rear bracket to match angled body of the SCX10 III Jeep Wrangler JLU, just like the stock tapered rock sliders.
Specifications:
* 155mm length, adjustable offset.
* Mounts using existing holes in stock skid plate.
* Steel construction - Hand Made/Welded.
**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:
-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,
-Flat Black: not as susceptible to chips
-Rustoleum Truck Bed Coating: easier to touch up using a can of Rustoleum Truck Bed Coating, available here: HERE
Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.
*Recommend hardware mounting kits available at the top of the page as an optional add-on.**
Lifetime Warranty Info
ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.
If you have an issue with your item, please leave detailed info below or you can mail in with info.
Items for warranty repair/replacement can should be mailed to:
ScalerFab, Inc
PO Box 130
Divide, CO 80814
Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)
Adjustable, Bolt-On Rock Sliders for Axial Racing SCX10 III Jeep Gladiator
Regular price $39.95 USDScalerFab Steel Adjustable, Bolt- On Rock Sliders Compatible with Axial Racing SCX10III Gladiator
Steel Frame-mounted Rock Sliders w/ Optional Add-Ons (Shown in pictures) mount directly to the stock location of the plastic skid plate to replace the stock rock sliders.
Mounting Recommendations:
-Use first hole on front bracket, and second hole on rear bracket to match angled body of the SCX10 III Jeep Gladiator, just like the stock tapered rock sliders.
Specifications:
* 205mm length, adjustable offset.
* Mounts using existing holes in stock skid plate.
* Steel construction - Hand Made/Welded.
**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:
-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,
-Flat Black: not as susceptible to chips
-Rustoleum Truck Bed Coating: easier to touch up using a can of Rustoleum Truck Bed Coating, available here: HERE
Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.
*Recommend hardware mounting kits available at the top of the page as an optional add-on.**
Lifetime Warranty Info
ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.
If you have an issue with your item, please leave detailed info below or you can mail in with info.
Items for warranty repair/replacement can should be mailed to:
ScalerFab, Inc
PO Box 130
Divide, CO 80814
Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)
Comp-Style Front Bumper for Axial Racing SCX10 III Jeep Wrangler JLU/Gladiator
Regular price $58.95 USDOur most low-profile bumper with the best possible approach angle is here for the Axial Racing SCX10III Jeep Wrangler JLU/Gladiator!
RC Scale Welded Steel Ultra Low-Profile Comp-Style Front Bumper
Specifications:
- approx. 79mm wide (Just a bit wider than the frame rails)
- no fore/aft adjustment
- Bumper fits tight to the frame for the best possible approach angle.
- Steel construction - Hand Made/Welded.
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel.
Mounting Instructions:
1. Bumper is made to slide inside the C-channel of the frame rails.
2. Using included screws, mount by matching holes in the body post mount with holes in the brackets and frame rails, as shown below. *Use included washer between frame rails and body post mount as a spacer.
3. Back screws with awasher and nut.
**For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.
Lifetime Warranty Info
ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.
If you have an issue with your item, please leave detailed info below or you can mail in with info.
Items for warranty repair/replacement can should be mailed to:
ScalerFab, Inc
PO Box 130
Divide, CO 80814
Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)
Narrow Front Bumper for Axial Racing SCX10 III Jeep Wrangler JLU/Gladiator/Bronco
Regular price $52.95 USD
ScalerFab Welded Steel Narrow Front Bumper for Axial SCX10III Jeep Wrangler/Gladiator/Bronco- Trail Bar & Stinger options available.
*This bumper does NOT fit a winch. Click for Winch Bumper For JLU/Gladiator.
For Bronco Winch Front Bumper, CLICK HERE.
The ScalerFab SCX10 III bumpers are designed to work with the stock Axial body post mounting system. Bumpers will not mount with any after-market crossmembers or anything that would interfere with the end of the frame rails.
Specifications:
- 115mm wide
- Includes mounting hardware (4 button-head screws, 4 nuts, & 6 washers)
- Mounts using existing holes in frame - does not mount like stock plastic bumper.
- Steel construction - Hand Made/Welded.
- No fore/aft adjustment
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel.
Mounting Instructions:
1. Bumper is made to slide inside the c-channel of the frame rails.
2. Using included screws, mount by matching holes in the body post mount with holes in the brackets and frame rails, as shown below. *Use included washer between frame rails and body post mount as a spacer.
3. Back screws with a washer and nut.
Lifetime Warranty Info
ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.
If you have an issue with your item, please leave detailed info below or you can mail in with info.
Items for warranty repair/replacement can should be mailed to:
ScalerFab, Inc
PO Box 130
Divide, CO 80814
Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)
Pro Series Narrow Winch Front Bumper for Axial Racing SCX10 III Jeep Wrangler JLU/Gladiator
Regular price $67.95 USD
ScalerFab Welded Steel Pro Series Narrow Winch Front Bumper for Axial SCX10III Jeep Wrangler JLU/Gladiator- Trail Bar & Stinger options available.
*This bumper is made for a bumper-mounted winch and includes pre-drilled holes with the RC4WD Warn Winch pattern. Click for Low-Profile Narrow Bumper without winch holes.
TO MOUNT WINCH: You will need to flip the winch mounting plate in order to install on bumper.
The ScalerFab SCX10 III bumpers are designed to work with the stock Axial body post mounting system. Bumpers will not mount with any after-market crossmembers or anything that would interfere with the end of the frame rails.
Specifications:
- 115mm wide
- Includes mounting hardware (4 button-head screws, 4 nuts, & 6 washers)
- Laser-cut Gussets for added strength and scale appearance
- Extra attention to detail during finishing process to optimize performance and appearance.
- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and 8274 Winch, 3Racing Winch, and SSD Ox Power Winch mounting pattern)
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s)
- Steel construction - Hand Made/Welded.
- No fore/aft adjustment
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel.
Mounting Instructions:
1. Bumper is made to slide inside the C-channel of the frame rails.
2. Using included screws, mount by matching holes in the body post mount with holes in the brackets and frame rails, as shown below. *Use included washer between frame rails and body post mount as a spacer.
3. Back screws with a washer and nut.
Lifetime Warranty Info
ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.
If you have an issue with your item, please leave detailed info below or you can mail in with info.
Items for warranty repair/replacement can should be mailed to:
ScalerFab, Inc
PO Box 130
Divide, CO 80814
Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)
Metal Replica Winch Front Bumper for Axial Adventure SCX10 III Jeep CJ-7
Regular price $62.95 USDScalerFab Welded Steel Replica Winch Front Bumper for Axial SCX10III Jeep CJ-7
Trail Bar & Stinger options available.
Expertly crafted metal front bumper designed specifically for Axial Adventure's SCX10 III Jeep CJ-7. Made with durable metal for a realistic scale appearance and unbeatable performance. Provides the lowest approach angle while still allowing for a bumper-mounted winch.
The ScalerFab SCX10 III CJ-7 bumpers are designed to work with the stock CJ-7 body post mounting system and includes post mounts build into the bumper. Bumpers will not mount with any after-market crossmembers or anything that would interfere with the end of the frame rails.
Specifications:
- 80mm wide
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel and mounts using existing holes in frame.
- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and 8274 Winch, 3Racing Winch, and SSD Ox Power Winch mounting pattern)
- Steel construction - Hand Made/Welded.
- No fore/aft adjustment
TO MOUNT WINCH: You will need to flip the winch mounting plate in order to install on bumper.
Mounting Instructions:
1. Bumper is made to slide inside the c-channel of the frame rails.
2. Mount by matching holes in the body post mount with holes in the brackets and frame rails, as shown below.
3. Back screws with a washer and nut.
ScalerFab Welded Steel Replica Non-Winch Front Bumper for Axial SCX10III Jeep CJ-7 Trail Bar & Stinger options available.
*This bumper does NOT fit a winch. Click for Winch Bumper For CJ-7.
Expertly crafted metal front bumper designed specifically for Axial Adventure's SCX10 III Jeep CJ-7. Made with durable metal for a realistic scale appearance and unbeatable performance. Provides the lowest approach angle without sacrificing strength. Don't worry about running a winch - this bumper is designed for maximum performance.
The ScalerFab SCX10 III CJ-7 bumpers are designed to work with the stock CJ-7 body post mounting system and includes post mounts build into the bumper. Bumpers will not mount with any after-market crossmembers or anything that would interfere with the end of the frame rails.
Specifications:
- 80mm wide
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel and mounts using existing holes in frame.
- Steel construction - Hand Made/Welded.
- No fore/aft adjustment
Mounting Instructions:
1. Bumper is made to slide inside the c-channel of the frame rails.
2. Mount by matching holes in the body post mount with holes in the brackets and frame rails, as shown below.
3. Back screws with a washer and nut.
Lifetime Warranty Info
ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.
If you have an issue with your item, please leave detailed info below or you can mail in with info.
Items for warranty repair/replacement can should be mailed to:
ScalerFab, Inc
PO Box 130
Divide, CO 80814
Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)
Metal Replica Non-Winch Front Bumper for Axial Adventure SCX10 III Jeep CJ-7
Regular price $57.95 USDScalerFab Welded Steel Replica Non-Winch Front Bumper for Axial SCX10III Jeep CJ-7 Trail Bar & Stinger options available.
*This bumper does NOT fit a winch. Click for Winch Bumper For CJ-7.
Expertly crafted metal front bumper designed specifically for Axial Adventure's SCX10 III Jeep CJ-7. Made with durable metal for a realistic scale appearance and unbeatable performance. Provides the lowest approach angle without sacrificing strength. Don't worry about running a winch - this bumper is designed for maximum performance.
The ScalerFab SCX10 III CJ-7 bumpers are designed to work with the stock CJ-7 body post mounting system and includes post mounts build into the bumper. Bumpers will not mount with any after-market crossmembers or anything that would interfere with the end of the frame rails.
Specifications:
- 80mm wide
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel and mounts using existing holes in frame.
- Steel construction - Hand Made/Welded.
- No fore/aft adjustment
Mounting Instructions:
1. Bumper is made to slide inside the c-channel of the frame rails.
2. Mount by matching holes in the body post mount with holes in the brackets and frame rails, as shown below.
3. Back screws with a washer and nut.
Lifetime Warranty Info
ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.
If you have an issue with your item, please leave detailed info below or you can mail in with info.
Items for warranty repair/replacement can should be mailed to:
ScalerFab, Inc
PO Box 130
Divide, CO 80814
Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)
