Vanquish VS4-10 Pro/Ultra Roll Bar

$41.45 USD

This is the brand new, just released ScalerFab Roll Bar for the Vanquish VS4-10 Pro/Ultra Origin Truck. Simple, yet strong and full of SCALE!

Vanquish VS4-10 Pro/Ultra Roll Bar

Specifications:
**Some Pictures Depict Optional Add-Ons

-Approx. 70mm tall x 185mm wide
-Hand-welded steel 3/16 rod
-Mounts by drilling 4 holes into truck bed, hardware not included. (*Requires four (4) 3mm x 8mm screws w/ nuts.)

Lifetime Warranty Info

Name: Vanquish VS4-10 Pro/Ultra Roll Bar
Brand: ScalerFab
Price: 41.45 USD
Availability: InStock

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please email Scalerfab with detailed information at

orders@scalerfab.com

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights.)

Vanquish VS4-10 Origin/Pro/Ultra 1/10 Scale Full-Width Front Bumper

$55.95 USD

Full-size Steel, welded front bumper for the Vanquish VS4-10 Origin/Ultra/Pro

*Pictures may depict optional add-ons

Trail Bar or Stinger Option Available Upon Request- (+$5). Email orders@scalerfab.com after placing order to add option.

Specifications:
- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and SSD Ox Power Winch mounting pattern)
- Mounts using existing hardware
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please email Scalerfab with detailed information at

orders@scalerfab.com

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights.)

Vanquish VS4-10 Full-Size Front Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Vanquish VS4-10 Origin/Pro/Ultra Rear Bumper

$55.95 USD

ScalerFab Welded Steel Rear Bumper for the Vanquish VS4-10 Origin/Pro/Ultra

Transform your vehicle with the Vanquish VS4-10 Rear Bumper! Experience added strength and a more realistic scale appearance with scalerfab technology. Upgrade your scale game and conquer the challenges ahead!

Specifications:-

- Approximately 200mm wide

-Adjustable mounting positions/depths - allows for better departure angle.
- Mounts using existing holes in frame - (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please email Scalerfab with detailed information at

orders@scalerfab.com

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights.)

Vanquish VS4-10 Origin/Pro/Ultra Rear Bumper

Vanquish VS4-10 Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Retro Series Vanquish VS4-10 Origin/Pro/Ultra Rear Bumper

$61.95 USD

A Brand New Series- The Retro Series features double tube work for that classic, old-school look! Pairs perfectly with the Retro Series Front Bumper HERE

ScalerFab Welded Steel Prerunner Series Rear Bumper for Vanquish VS4-10 Origin/Ultra/Pro

Specifications:-

- Approx 200mm wide
- Adjustable mounting positions/depths - allows for better departure angle.
- Mounts using existing holes in frame- (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please email Scalerfab with detailed information at

orders@scalerfab.com

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights.)

Retro Series Vanquish VS4-10 Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Retro Series Vanquish VS4-10 Origin/Pro/Ultra Front Bumper

$76.45 USD

The Retro Series features double tube work for that classic, old-school look! Pairs perfectly with the Retro Series Rear Bumper HERE.

Full-size Steel, welded Retro Series Front Bumper for the Vanquish VS4-10 Origin//Pro/Ultra!

Specifications:
- Approx. 190mm wide
- Mounts using existing hardware
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: not as susceptible to chips

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please email Scalerfab with detailed information at

orders@scalerfab.com

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights.)

Retro Series Vanquish VS4-10 Front Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Prerunner Series Vanquish VS4-10 Origin/Pro/Ultra Front Bumper

$76.45 USD

Our most popular series has made it to the Vanquish VS4-10!

The Prerunner series was designed for a combination of looks and performance under scale use. Made from 3/16" rod, the Prerunner Front Bumper for the VS4-10 is a low-profile, scale trail armor option.

Full-size Steel, welded Prerunner Series Front Bumper

for the Vanquish VS4-10 Origin/Pro/Ultra

Specifications:
- Approx. 190mm wide
- Mounts using existing hardware
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: not as susceptible to chips

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Main Pc courtesy of @camazoth on IG. #scalerfab for a feature!

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please email Scalerfab with detailed information at

orders@scalerfab.com

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights.)