Comp-Style Bull-Bar Front Bumper for the Vaterra Ascender K5 Blazer
Fits the following bodies, and may fit others (bumper sits even with top of frame rails and offers some fore/aft adjustment):
-K5 Chevy Blazer
-Pro-Line Racing 46 Power Wagon
With over 50 possible combinations to choose from on this bumper, you can truly build the perfect piece of trail armor for your needs. If you weren't a competitor already, our Comp-Style "bull-bar" Front Bumper will allow you to push the limits of your Vaterra Ascender K5 Blazer without having to worry about approach angles.
Drive OVER the rocks, don't work around your bumper!
ScalerFab's RC Scale Welded Steel Ultra Low-Profile Comp-Style Front Bumper for Vaterra Ascender
Specifications:
- Approx. 76mm wide (72mm wide Stock Ascender bracket width)
- 20mm deep top plate w/ approx. 12mm of fore/aft adjustment.
- Bumper fits tight to the frame for the best approach angle possible.
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) - see photos (Longer hardware recommended- hardware not included)
- Steel construction - Hand Made/Welded.
* Steel construction - Hand Made/Welded.
* Can be drilled to accept winch.
**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:
-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,
-Flat Black: Superficial matte black coating, will scratch under normal use.
-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE
Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.
*Recommend hardware mounting kits available at the top of the page as an optional add-on.**
Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.
