Comp-Style SCX10/SCX10 II Front Bumper with Stinger

$48.95 USD

Fits the following bodies, and may fit others (bumper sits even with top of frame rails and offers some fore/aft adjustment):

-Jeep Wrangler
-Pro-Line SR5 (with the stock plastic bumper)
-Pro-Line Jeep Wrangler
-G6/Deadbolt
-CRC Jeep Wrangler Unlimited
-Pro-Line Racing 46 Power Wagon

With over 50 possible combinations on to choose from on this bumper, you can truly build the perfect piece of trail armor for your needs. If you weren't a competitor already, our Comp-Style Front Bumper w/ Stinger will allow you to push the limits of your SCX10/SCX10 2 without having to worry about approach angles.

Drive OVER the rocks, don't work around your bumper!

RC Scale Welded Steel Ultra Low-Profile Comp-Style Front Bumper w/ Stinger for Axial SCX10/SCX10 II Jeep Rubicon, CRC Wrangler Unlimited, Deadbolt/G6, etc.

**If using on the Pro-Line SR5 body, this is made to fit WITH the stock plastic Bumper for a bull-bar look. For a raised bumper that requires trimming of the plastic bumper, please see our other SR5 listings.

Sits even with the top of the frame rails. For RAISED brackets (+20mm above top of frame rails), see our selection HERE

Specifications:

- Finished width 79mm wide (74mm standard scx10 bracket width)
- 20mm deep top plate w/ approx. 12mm of fore/aft adjustment.
- Bumper fits tight to the frame for the best approach angle possible.
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories)
- Steel construction - Hand Made/Welded.
- Can be drilled to accept winch.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

Name: Comp-Style SCX10/SCX10 II Front Bumper with Stinger
Brand: SCX10
Price: 48.95 USD
Availability: InStock

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Comp-Style SCX10/SCX10 II Front Bumper with Stinger - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Custom

So great to work with. They listened and understood what I was wanting. They communicated through the process. The bumper showed up and was absolutely perfect !! Great company to work with.

Scx10 pro front stinger!

Scaler Fab stinger is more than a bumper it’s a tool for the front of your crawler helps with up and down transitions where normally you would get stuck or flip forward! Perfect fit and craftsmanship bottom line You need this.

Comp bumper

[****] the bumper is what I wanted but one weld was a little sloppy but it looks great

Prerunner Series Comp-Style SCX10/SCX10 II SR5/Honcho Raised Front Bumper

$63.95 USD

Our Raised Prerunner Series Comp-Style SR5 /Honcho Trail Armor is specifically made for the best possible approach angle, which is why it is designed to be used with a chassis-mounted servo winch. A bumper-mounted winch (9.5cti or similar smaller winch) will fit on the bumper but will be tucked in behind the body. For products that work better with a bumper-mounted winch, see our Raised Narrow and regular Prerunner Series Bumpers.

ScalerFab Welded Steel Prerunner Series Comp-Style Raised Front Bumper for Axial SCX10/SCX10 II SR5/Honcho

*Shown with optional Front Fairlead Mount

Specifications:

- approx. 150mm wide
- Requires trimming of plastic bumper for Pro-Line SR5 Body
- Bumper Top Plate sites approx. 20mm above the top of the frame rail.
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories)
- Steel construction - Hand Made/Welded.
- Has slots for adjustable fore/aft mounting

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Prerunner Series Comp-Style SCX10/SCX10 II SR5/Honcho Raised Front Bumper

Prerunner Series Comp-Style SCX10/SCX10 II SR5/Honcho Raised Front Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Prerunner Series Comp-Style SCX10/SCX10 II SR5/Honcho Raised Front Bumper w/ Stinger

$63.95 USD

ScalerFab Welded Steel Prerunner Series Comp-Style Raised Front Bumper w/ Stinger for Axial SCX10/SCX10 II SR5/Honcho

Our Raised Prerunner Series Comp-Style SR5 /Honcho Trail Armor is specifically made for the best possible approach angle, which is why it is designed to be used with a chassis-mounted servo winch. A bumper-mounted winch (9.5cti or similar smaller winch) will fit on the bumper but will be tucked in behind the body (will need to drill own holes). For products that work better with a bumper-mounted winch, see our Raised Narrow and regular Prerunner Series Bumpers.