Prerunner Series Redcat Everest (Gen 7/ Gen 7 Pro) Front Bumper

$58.95 USD

ScalerFab Welded Steel Prerunner Series Front Bumper for Redcat Everest (Gen 7/ Gen 7 Pro)

Specifications:
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) - see photos (Longer hardware recommended- hardware not included)
- Steel construction - Hand Made/Welded.
- Has slots for adjustable fore/aft mounting

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

Name: Prerunner Series Redcat Everest (Gen 7/ Gen 7 Pro) Front Bumper
Brand: ScalerFab
Price: 58.95 USD
Availability: InStock

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Prerunner Series Redcat Everest (Gen 7/ Gen 7 Pro) Front Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Prerunner Series Redcat Everest (Gen 7/ Gen 7 Pro) Rear Bumper

$59.95 USD

ScalerFab Welded Steel Prerunner Series Rear Bumper for Redcat Everest Gen 7/ Gen 7 Pro

Specifications:
- Adjustable mounting positions/depths - allows for better departure angle over stock
- Mounts using existing holes in frame and requires drilling (2) holes - does not mount like stock plastic bumper(s) - (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Prerunner Series Redcat Everest (Gen 7/ Gen 7 Pro) Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Prerunner Series Redcat Racing Gen8 Scout II Front Bumper

$58.95 USD

Improve approach angle and performance over stock with our Welded Steel Prerunner Series Front Bumper for Redcat Racing Gen8 Scout II

Specifications:
- 207mm
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) - see photos (Longer hardware recommended- hardware not included)
- Steel construction - Hand Made/Welded.
- Has slots for adjustable fore/aft mounting

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Prerunner Series Redcat Racing Gen8 Scout II Front Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Absolutely the best scale body armor and bumpers out there! Fit and build is perfect. Will recommend it to anyone!

Beyond Expectations

The bumpers look great, perform amazing and are super solid. Would recommend these to anyone wanting an upgrade to their stock bumpers

PreRunner Series Redcat Racing Gen8 Scout II Rear Bumper

$59.95 USD

ScalerFab Welded Steel Prerunner Series Rear Bumper for Redcat Racing Gen8 Scout II

Specifications:-
-220mm width including wrapped ends
- Adjustable mounting positions/depths - allows for better departure angle over stock
- Mounts using existing holes in frame and requires drilling (2) holes - does not mount like stock plastic bumper(s) - (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

PreRunner Series Redcat Racing Gen8 Scout II Rear Bumper

PreRunner Series Redcat Racing Gen8 Scout II Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Awesome!

These are the real deal!! No wonder your website has a disclaimer that these are RC parts not real truck parts! I will definitely be getting more parts made for other builds in the future!!

Absolutely the best scale body armor and bumpers out there! Fit and build is perfect. Will recommend it to anyone!

Best Upgrade Yet

These bumpers are solid.

Awesome Bumpers!

These are well made and strong, they mound directly to the frame and fit perfectly. Shipping was pretty quick considering they're hand made. They came well packaged, no issues at all. Highly recommend!

Redcat Everest Gen7/ Gen7Pro Narrow Front Bumper w/ Stinger

$48.95 USD

ScalerFab Welded Steel Narrow Front Bumper for Redcat Everest (Gen 7 & Gen 7 Pro) with Stinger.

**Some pictures may depict optional add-ons. Winch not included.

Specifications:

- 115mm wide
- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and 8274 Winch, 3Racing Winch, and SSD Ox Power Winch mounting pattern)
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) - see photos (Longer hardware recommended- hardware not included)
- Steel construction - Hand Made/Welded.
- Has slots for adjustable fore/aft mounting

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Redcat Everest (Gen 7/ Gen 7 Pro) Narrow Front Bumper with Stinger - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Redcat Everest Gen7/Gen7 Pro Standard Rear Bumper

$44.95 USD

ScalerFab Welded Steel Rear Bumper for Redcat Gen7/Gen 7 Pro

*Pictured with optional Hitch Receiver

Specifications:-
-200mm width
- Adjustable mounting positions/depths - allows for better departure angle over stock
- Mounts using existing holes in frame- (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Redcat Everest Gen7/Gen7 Pro Standard Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Redcat Everest Gen7/Gen7Pro Scale Front Bumper w/ Stinger

$58.95 USD

Full-size Steel, welded front bumper w/ Stinger

for the Redcat Everest Gen 7/ Gen 7 Pro
*Pictures depict optional add-ons

Specifications:
-190mm wide
- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and SSD Ox Power Winch mounting pattern)
- Mounts using existing hardware
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Redcat Everest (Gen 7/Gen 7 Pro) Full-Size Front Bumper w/ Stinger - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Redcat Everest Gen7/Pro 1/10 Scale Full-Width Front Bumper with Trail Bar

$58.95 USD

Ditch the bulk and boost performance with this ScalerFab Full-Size Front Bumper for the Redcat Everest Gen7 or Gen7 Pro!

Full-size Steel, welded full-size front bumper
for Redcat Everest Gen7/ Gen7 Pro
**Some Pictures may depict Optional Add-Ons

Specifications:
- 190mm wide
- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and SSD Ox Power Winch mounting pattern)
- Steel construction - Hand Made/Welded.
- Has slots for adjustable fore/aft mounting

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Redcat Everest Gen7/Pro Full-Size Front Bumper with Trail Bar - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Redcat Racing Gen8 Scout II 1/10 Scale Full-Width Front Bumper

$53.95 USD

Full-size Steel, welded front bumper for the Redcat Racing Gen8 Scout II
*Pictures depict optional add-ons

Specifications:
-207mm wide
-Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and SSD Ox Power Winch mounting pattern)
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) - see photos (Longer hardware recommended- hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Redcat Racing Gen8 Scout II Full-Size Front Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Redcat Racing Gen8 Scout II Rear Bumper

$44.95 USD

ScalerFab Welded Steel Rear Bumper for Redcat Racing Gen8 Scout II

*Pictured with optional Hitch Receiver- this option works with stock hitch pin and pug, as well as the Axial Trailer Hitch Insert.

Enhance your RC vehicle with the Redcat Racing Gen8 Scout II Rear Bumper! This scale armor adds extra protection and style to your RC, ensuring a bolder performance on any terrain. Take your RC adventures to the next level with this must-have upgrade!

Specifications:-
-180mm width NOTE- made to fit within the stock body cutout. For a wider/custom width, enter in the space provided below. (You'll need to trim the body to accommodate more width)
- Adjustable mounting positions/depths - allows for better departure angle over stock
- Mounts using existing holes in frame and existing hardware.
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

Mounting instructions:

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Redcat Racing Gen8 Scout II Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Redcat Racing Gen8 Scout II Rock Sliders

$47.95 USD

Redcat Racing Gen8 Scout II Rock Sliders
(**Pics on vehicle depict optional Double Bar & Skid Plate add-ons)

*NOTE:
-Will need to trim approx. 1/8" off the rocker portion of the body for best fitment.

- currently only available when using the stock wheelbase (middle holes, front & rear). Additional options will be available within 2-3 weeks.

Specifications:
* Approx. 160mm length, 55mm off-set
* Mounts using existing holes in frame (hardware not included)
* Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Redcat Racing Gen8 Scout II Rock Sliders - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Very happy overall, tiny modification needed

A late review as I ordered these last Oct but absolutely love them. I got the natural steel for the rustic look. They fit almost perfect and all the holes are right on but there is a small area that I needed to disc sand out as it interfered slightly. It was about a 30 second fix with an air grinder but a file or dremel would have worked just as well. Seriously no big deal and it really does help crawling as the entire center area of my Gen8 Axe is now smooth and glides right over everything. These are flared nicely on both ends and NOTHING catches. Perfect !! (you can see in the pics where the clearance cuts are)

Absolutely the best scale body armor and bumpers out there! Fit and build is perfect. Will recommend it to anyone!

Awesome trail armor!

The bumpers and sliders a very well made pieces, they fit perfectly and are solid. Well worth the wait as they're made to order. Definitely 100% happy with Scaler Fab, I'll be ordering more for my other rigs!

Universal Rock Slider/Chassis/Cage Brackets w/ Link Riser Mount (2) *

$17.45 USD

Laser-cut mounting brackets with built-in Front/Rear Link Riser Mount Universale fit for SCX10/SCX10 II, Element RC, Traxxas TRX4 & gen 7/8/ (with the link riser mounts removed), Vaterra Ascender, G-Made Sawback, and ECX Barrage. Also use for custom chassis, or custom cage builds.
Sold in pairs.

* Built-in Front & Rear Link Riser Mount (usability will depend on chassis/body, so some features may not work across all platforms)

* Laser cut from 14ga steel

* 90mm x 11mm

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Universal Rock Slider/Chassis/Cage Brackets w/ Link Riser Mount (2) * - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Exactly what I needed for my injora rock buggy build.

Upper link risers

So i got these for my scx10 ii. I was switching over to a Vader flat skid plate for more ground clearance. In order to do that you have to change your link geometry so that upper and lower links don't run the same way and make contact. So i ordered the Scaler Fab upper link risers. I was impressed with the quality and how durable they look. They fit like a glove didn’t have any problems with installing it. Performance wise it did change the feel of my crawler. Noticed more flex in the rear, and climbing steep inclines i notice that the front end would bite down more for better traction. Overall happy with this product and the shipping was fast. I look forward to ordering more parts from Scaler Fab in the near future. FIRME ass Company holmes you wont regret it doing business with ScalerFab.

scalerfab

Lifetime Warranty Info

Lifetime Warranty Info

Lifetime Warranty Info

Customer Reviews

Lifetime Warranty Info

Customer Reviews

Lifetime Warranty Info

Lifetime Warranty Info

Lifetime Warranty Info

Lifetime Warranty Info

Lifetime Warranty Info

ScalerFab Welded Steel Rear Bumper for Redcat Racing Gen8 Scout II

Enhance your RC vehicle with the Redcat Racing Gen8 Scout II Rear Bumper! This scale armor adds extra protection and style to your RC, ensuring a bolder performance on any terrain. Take your RC adventures to the next level with this must-have upgrade!

Lifetime Warranty Info

Lifetime Warranty Info

Customer Reviews

Lifetime Warranty Info

Customer Reviews

Promos

DIY Bungee Cord Tutorial

Collaborate with Us!