Prerunner Series Vanquish VS4-10 Origin/Pro/Ultra Front Bumper

$73.95 USD

Our most popular series has made it to the Vanquish VS4-10!

The Prerunner series was designed for a combination of looks and performance under scale use. Made from 3/16" rod, the Prerunner Front Bumper for the VS4-10 is a low-profile, scale trail armor option.

Full-size Steel, welded Prerunner Series Front Bumper

for the Vanquish VS4-10 Origin/Pro/Ultra

Specifications:
- Approx. 190mm wide
- Mounts using existing hardware
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: not as susceptible to chips

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Main Pc courtesy of @camazoth on IG. #scalerfab for a feature!

Lifetime Warranty Info

Name: Prerunner Series Vanquish VS4-10 Origin/Pro/Ultra Front Bumper
Brand: ScalerFab
Price: 73.95 USD
Availability: InStock

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Prerunner Series Vanquish VS4-10 Front Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Retro Series Vanquish VS4-10 Origin/Pro/Ultra Front Bumper

$73.95 USD

The Retro Series features double tube work for that classic, old-school look! Pairs perfectly with the Retro Series Rear Bumper HERE.

Full-size Steel, welded Retro Series Front Bumper for the Vanquish VS4-10 Origin//Pro/Ultra!

Specifications:
- Approx. 190mm wide
- Mounts using existing hardware
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: not as susceptible to chips

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Retro Series Vanquish VS4-10 Front Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Retro Series Vanquish VS4-10 Origin/Pro/Ultra Rear Bumper

$59.95 USD

A Brand New Series- The Retro Series features double tube work for that classic, old-school look! Pairs perfectly with the Retro Series Front Bumper HERE

ScalerFab Welded Steel Prerunner Series Rear Bumper for Vanquish VS4-10 Origin/Ultra/Pro

Specifications:-
- Adjustable mounting positions/depths - allows for better departure angle.
- Mounts using existing holes in frame- (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Retro Series Vanquish VS4-10 Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Retro Series Vanquish VS4-10 Phoenix Rear Bumper

$59.95 USD

The Retro Series features double tube work for that classic, old-school look!

ScalerFab Welded Steel Prerunner Series Rear Bumper for
Vanquish VS4-10 Phoenix

Specifications:-
- Adjustable mounting positions/depths - allows for better departure angle.
- Mounts using existing holes in frame- (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Retro Series Vanquish VS4-10 Phoenix Rear Bumper

Holy smokes

These bumpers are beautiful. Couldn’t wait to get it on my truck. They did not disappoint. Don’t think…add to cart.

Nice

Was a lil tight to get on but it fit and works great

My Phoenix

The bumpers look awesome.. they fit perfectly

Vanquish Ripper Front Bumper with Brush Guard

$58.95 USD

Drive OVER the rocks, don't work around your bumper!

RC Scale Welded Steel Front Bumper w/ Brush Guard for Vanquish Ripper

Specifications:

- 130mm width
-Mounts to the outside of the frame rails using existing holes in frame (will need to pinch in frame rails slightly to fit bumper between the frame of the Ripper and the frame rails) -see photos (Longer hardware recommended- hardware not included)
- Steel construction - Hand Made/Welded.
- Can be drilled to accept winch.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Vanquish Ripper Front Bumper with Brush Guard - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Vanquish Ripper Front Bumper with Stinger

$48.95 USD

Drive OVER the rocks, don't work around your bumper!

RC Scale Welded Steel Ultra Low-Profile Comp-Style Front Bumper for Vanquish Ripper

Specifications:

- Mounts to the outside of the frame rails using existing holes in frame (will need to pinch in frame rails slightly to fit bumper between the frame of the Ripper and the frame rails) -see photos (Longer hardware recommended- hardware not included)
- Steel construction - Hand Made/Welded.
- Can be drilled to accept winch.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Vanquish Ripper Front Bumper with Stinger - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Vanquish Ripper Rock Sliders w/ Skids

$56.95 USD

Vanquish Ripper Rock Sliders w/ Skid Plates

Steel Rock Sliders w/ Skid Plates made specifically for the Vanquish Ripper.

*Mounts by screwing 4 button screws into the underside of the sliders. (hardware not included) - see photos

* Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Vanquish Ripper Rock Sliders w/ Skids - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Vanquish VS4-10 Origin/Pro/Ultra 1/10 Scale Full-Width Front Bumper

$53.95 USD

Full-size Steel, welded front bumper for the Vanquish VS4-10 Origin/Ultra/Pro

*Pictures may depict optional add-ons

Trail Bar or Stinger Option Available Upon Request- (+$5). Email orders@scalerfab.com after placing order to add option.

Specifications:
- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and SSD Ox Power Winch mounting pattern)
- Mounts using existing hardware
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Vanquish VS4-10 Full-Size Front Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Vanquish VS4-10 Origin/Pro/Ultra Rear Bumper

$53.95 USD

ScalerFab Welded Steel Rear Bumper for the Vanquish VS4-10 Origin/Pro/Ultra

Transform your vehicle with the Vanquish VS4-10 Rear Bumper! Experience added strength and a more realistic scale appearance with scalerfab technology. Upgrade your scale game and conquer the challenges ahead!

Specifications:-
- Adjustable mounting positions/depths - allows for better departure angle.
- Mounts using existing holes in frame - (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Vanquish VS4-10 Origin/Pro/Ultra Rear Bumper

Vanquish VS4-10 Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Worth The Wait!

The finish and fitment is excellent. Installation was easy, both front and rear bumpers look great on my rig and add some weight/rigidity at the ends of the frame. Super stoked to get out on the rocks and show just how good they really are.

Vanquish VS4-10 Phoenix Rear Bumper

$53.95 USD

ScalerFab Welded Steel Rear Bumper for the Vanquish VS4-10 Phoenix

Transform your vehicle with the Vanquish VS4-10 Phoenix Rear Bumper! With its sleek design and enhanced performance, this upgrade is sure to make a statement. Rise from the ashes and conquer any terrain with confidence. Upgrade now for an unbeatable driving experience!

Specifications:-
- Adjustable mounting positions/depths - allows for better departure angle.
- Mounts using existing holes in frame - (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Best bumpers on the market

The bumpers I ordered were amazing, great quality and the make my vs410 Phoenix look sick. I recommend the bumpers from this company to everyone because they are great.

Love my products fit perfectly and looks amazing on the Rig!

Fab Scalerfab

Great craftsmanship, delivery time and service! Loving the look of my Pheonix now, Cheers Scalerfab.

Vanquish VS4-10 Pro/Ultra Roll Bar

$40.00 USD

This is the brand new, just released ScalerFab Roll Bar for the Vanquish VS4-10 Pro/Ultra Origin Truck. Simple, yet strong and full of SCALE!

Vanquish VS4-10 Pro/Ultra Roll Bar

Specifications:
**Some Pictures Depict Optional Add-Ons

-Approx. 70mm tall x 185mm wide
-Hand-welded steel 3/16 rod
-Mounts by drilling 4 holes into truck bed, hardware not included. (*Requires four (4) 3mm x 8mm screws w/ nuts.)

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

VS4-10 Phoenix Comp-Style Front Bumper with Stinger

$53.95 USD

With over 50 possible combinations on to choose from on this bumper, you can truly build the perfect piece of trail armor for your needs. If you weren't a competitor already, our Comp-Style Front Bumper w/ Trail Bar will allow you to push the limits of your Barrage without having to worry about approach angles.

RC Scale Welded Steel VS410 Phoenix Comp-Style Front Bumper w/ Stinger
**READ MOUNTING INSTRUCTIONS**

Specifications:

- 78mm wide (74mm inside to inside bracket measurement)
- Includes 3/8 rod extended mounting rod with predrilled hole for normal stock body mounting with bumper.
- Steel construction - Hand Made/Welded.

Mounting instructions:

- Bumper mounts against the frame rails, sandwiched between frame rails and plastic inner fenders.
-Extended mounting rod included. Body pin should be inserted from the bottom with the long end sticking up through the slot on the plastic mount to keep it in place.
-For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: matte black finish, susceptible to scratches under normal use.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

VS4-10 Phoenix Comp-Style Front Bumper with Trail Bar

$53.95 USD

With over 50 possible combinations on to choose from on this bumper, you can truly build the perfect piece of trail armor for your needs. If you weren't a competitor already, our Comp-Style Front Bumper w/ Trail Bar will allow you to push the limits of your Barrage without having to worry about approach angles.

RC Scale Welded Steel VS410 Phoenix Comp-Style Front Bumper w/ Trail Bar.
**READ MOUNTING INSTRUCTIONS**

Specifications:

- 78mm wide (74mm inside to inside bracket measurement)
- Includes 3/8 rod extended mounting rod with predrilled hole for normal stock body mounting with bumper.
- Steel construction - Hand Made/Welded.

Mounting instructions:

- Bumper mounts against the frame rails, sandwiched between frame rails and plastic inner fenders.
-Extended mounting rod included. Body pin should be inserted from the bottom with the long end sticking up through the slot on the plastic mount to keep it in place.
-For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: matte black finish, susceptible to scratches under normal use.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)