ScalerFab Welded Steel Prerunner Series Rear Bumper for Traxxas TRX4 Bronco
Specifications:-
- Requires slight body trimming
- Approx. 200mm overall width with 15mm wrapped ends
- Adjustable mounting positions/depths - allows for better departure angle over stock
- Mounts using existing holes in frame and requires drilling (2) holes - does not mount like stock plastic bumper(s) - (hardware not included)
- Steel construction - Hand Made/Welded.
**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:
-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own.
-Flat Black: Superficial matte black coating, will scratch under normal use.
-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE
Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.
*Recommend hardware mounting kits available at the top of the page as an optional add-on.**
Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.