Search Results

Fits the following bodies, and may fit others (bumper sits even with top of frame rails and offers some fore/aft adjustment): -Jeep Wrangler-Pro-Line SR5 (with the stock plastic bumper)-Pro-Line Jeep Wrangler-G6/Deadbolt-CRC Jeep Wrangler Unlimited-Pro-Line Racing 46 Power Wagon With over 50 possible combinations to choose from on this bumper, you...

Fits the following bodies, and may fit others (bumper sits even with top of frame rails and offers some fore/aft adjustment): -Jeep Wrangler-Pro-Line SR5 (with the stock plastic bumper)-Pro-Line Jeep Wrangler-G6/Deadbolt-CRC Jeep Wrangler Unlimited-Pro-Line Racing 46 Power Wagon With over 50 possible combinations on to choose from on this bumper,...

Steel, welded rear bumper for a SCX10/SCX10 II NuKizer. ***Body will need to be trimmed for custom fit. ***Some Photos depict optional Add-ons, which may be an additional cost. Engineered with precision and style, the Full-Width Rear Bumper for Axial SCX10/SCX10 II NuKizer offers unparalleled performance and a sleek, scale look. Dominate...

Our most popular series has made it to the RC4WD C2X! The Prerunner series was designed for a combination of looks and performance under scale use. Made from 3/16" rod, the Prerunner Front Bumper for the C2X is a low-profile, scale trail armor option. Full-size Steel, welded Prerunner Series Front Bumper for...

Axial Full-Width Steel, Welded Front Bumper for the Axial SCX10 III Base Camp. Full width and full scale! This Class 1 worthy low-profile front bumper allows for full tire clearance under full turn & compressionIt even includes the ability to mount a winch behind the grill. (MADE FOR STOCK VEHICLE- Any modifications...

ScalerFab's RC Scale Welded Steel Narrow Winch Front Bumper with Trail Bar for RC4WD C2X w/ Mohave Body. Specifications: - Approx. 115mm wide with 5mm raised brackets- Some fore/aft adjustment- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and 8274 Winch, 3Racing Winch, and SSD Ox Power Winch mounting pattern)-...

ScalerFab Comp-Style Pro Series Welded Steel Narrow Front Bumper w/ Stinger for Axial SCX10/SCX10 II Jeep Rubicon, CRC Wrangler Unlimited, Deadbolt/G6, etc. Sits even with the top of the frame rails. For RAISED brackets (+20mm above top of frame rails), see our selection HERE *Additional Options may be available one...

ScalerFab Pro Series Welded Steel Narrow Front Bumper w/ Trail Bar for Axial SCX10/SCX10 II Jeep Rubicon, CRC Wrangler Unlimited, Deadbolt/G6, etc. Sits even with the top of the frame rails. For RAISED brackets (+20mm above top of frame rails), see our selection HERE *Additional Options may be available one...

ScalerFab Welded Steel Narrow Front Bumper w/ Trail Bar for Axial SCX10/SCX10 II Jeep Rubicon, CRC Wrangler Unlimited, Deadbolt/G6, etc. Sits even with the top of the frame rails. For RAISED brackets (+20mm above top of frame rails), see our selection HERE **Some pictures may depict optional add-ons. Winch not...

Full-size Steel, welded front bumper w/ Stingerfor the SCX10/ SCX10 2 XJ- (Also fits on the Traxxas TRX4 Chassis with the XJ body)*Pictures depict optional add-ons Specifications:-205mm wide- Raised brackets specifically for XJ Body- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and SSD Ox Power Winch mounting pattern)- Mounts...

Full-size Steel, welded front bumper for the Vaterra Ascender with Trail Bar. (SHOWN ON BRONCO BODY. FOR K5, K10 & F100, THE STYLE IS THE SAME W/ DIFFERENT MEASUREMENTS TO FIT THE DIFFERENT BODIES) Specifications: - 190-205mm wide, depending on body style (F100 will be raised approx. 15mm above the framerails)-...

ScalerFab Welded Steel Narrow Front Bumperw/ Stinger for Axial SCX10/SCX10 II Jeep Rubicon, CRC Wrangler Unlimited, Deadbolt/G6, etc. Sits even with the top of the frame rails. For RAISED brackets (+20mm above top of frame rails), see our selection HERE **Some pictures may depict optional add-ons. Winch not included. Specifications:...

Full-size Steel, welded Prerunner Series Front Bumper for the SCX10/ SCX10 2 XJ Body- (Also fits on the Traxxas TRX4 Chassis with the XJ body) ALSO FITS THE PRO-LINE 4-Runner body WITH the plastic front bumper. If removing plastic front bumper, see the Honcho Raised Prerunner Series bumper and add custom...

ScalerFab Comp-Style Pro Series Welded Steel Narrow Front Bumper w/ Trail Bar for Axial SCX10/SCX10 II Jeep Rubicon, CRC Wrangler Unlimited, Deadbolt/G6, etc. Bumper fits tight to the frame for the best approach angle possible and will not work with a bumper-mounted winch. Sits even with the top of the frame...

Full-size Steel, welded front bumper for the SCX10/ SCX10 2 XJ (Also fits on the Traxxas TRX4 Chassis with the XJ body)*Pictures depict optional add-ons Specifications:-205mm wide- Raised brackets specifically for XJ Body- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and SSD Ox Power Winch mounting pattern)- Mounts using...

ScalerFab Comp-Style Pro Series Welded Steel Narrow Front Bumper w/ Stinger for Axial SCX10/SCX10 II Jeep Rubicon, CRC Wrangler Unlimited, Deadbolt/G6, etc. Bumper fits tight to the frame for the best approach angle possible and will not work with a bumper-mounted winch. Sits even with the top of the frame rails....