Search Results

Element RC Enduro Sendero/Sendero HD Cab-Only Rock SlidersSteel Frame-mounted Rock Sliders w/ Optional Add-Ons (Shown in pictures) This set is specifically for only using the cab portion of the Enduro Sendero. Will be shorter in the rear than our regular Sendero Rock Sliders to only cover the length of the...

Element RC Enduro Knightrunner Rock Sliders w/ Skid PlatesSteel Frame-mounted Rock Sliders w/ Skid Plates for mounting electronics, etcThe receiver box and ESC will either need to be relocated or attached to our skid plates option, which we highly recommend. ALL NEW Body Capture Bar Option available! Our Body Capture...

ScalerFab Welded Steel Prerunner Series Element RC Enduro Sendero/Sendero HD Front Bumper Improved approach angle over stock***NOTE selecting the shackle mounts option will decrease approach angle and performance, as they will stick out slightly from the front edge of the bumper. Specifications:- 200mm wide- Will not fit a bumper-mounted winch (this...

*Sample picture. PLEASE READ DESCRIPTION FOR FULL SPECIFICATIONS before ordering, as some pictures may depict different variations available.Our Comp-Style Trail Armor is specifically made for the best possible approach angle while still qualifying for your SORRCA scale points, which is why this version has a thinner top plate meant to work...

ScalerFab Welded Steel Narrow Front Bumper for Element RC Enduro Knightrunner Trail Truck Sits even with the top of the frame rails. **Some pictures may depict optional add-ons. Winch not included. Specifications: - 115mm wide- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and 8274 Winch, 3Racing Winch, and SSD...

ScalerFab Welded Steel Prerunner Series Element RC Enduro Knightrunner Trail Truck Front Bumper Improved approach angle over stock***NOTE selecting the shackle mounts option will decrease approach angle and performance, as they will stick out slightly from the front edge of the bumper. Specifications:- 200mm wide- Will not fit a bumper-mounted winch-...

**Shown with optional front fairlead mountOur Comp-Style Trail Armor is specifically made for the best possible approach angle while still qualifying for your SORRCA scale points, which is why this version has a thinner top plate meant to work with a chassis-mounted servo winch. For products that work with a bumper-mounted winch, see...

ScalerFab Welded Steel Prerunner Series Element RC Enduro Trailwalker Front Bumper Improved approach angle over stock***NOTE selecting the shackle mounts option will decrease approach angle and performance, as they will stick out slightly from the front edge of the bumper. Specifications:- 200mm wide- Will not fit a bumper-mounted winch- Mounts using...

**Shown with optional front fairlead mountOur Comp-Style Trail Armor is specifically made for the best possible approach angle while still qualifying for your SORRCA scale points. This bumper also allows for a bumper-mounted winch. For products that work better with a servo winch, see our other version HERE. ScalerFab Welded Steel Comp-Style...

**Shown with optional front fairlead mountOur Comp-Style Trail Armor is specifically made for the best possible approach angle while still qualifying for your SORRCA scale points. This bumper also allows for a bumper-mounted winch. For products that work better with a servo winch, see our other version HERE. ScalerFab Welded Steel Comp-Style...

Full-size Steel, welded front bumper for the Element Eduro Sendero.*Pictures depict optional add-ons Specifications:-205mm wide-Bumper is made to stick out enough to fit a bumper-mounted winch. - Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available...

Full-size Steel, welded front bumper for the Element Eduro Sendero/Sendero HD.*Pictures depict optional add-ons Specifications:-205mm wide-Bumper is not made to fit a bumper-mounted winch. This model is built to give the best approach angle possible for this full-size option. Shown with optional front fairlead mount for servo winch.- Mounts using existing...

ScalerFab Steel Adjustable, Bolt- On Rock Sliders Compatible with Axial Racing SCX10III Gladiator Steel Frame-mounted Rock Sliders w/ Optional Add-Ons (Shown in pictures) mount directly to the stock location of the plastic skid plate to replace the stock rock sliders. Mounting Recommendations:-Use last hole, or adjust to desired offset. Specifications:*...

Laser-cut mounting brackets with built-in Front/Rear Link Riser Mount Universale fit for SCX10/SCX10 II, Element RC, Traxxas TRX4 & gen 7/8/ (with the link riser mounts removed), Vaterra Ascender, G-Made Sawback, and ECX Barrage. Also use for custom chassis, or custom cage builds. Sold in pairs. * Built-in Front & Rear...

Protect your rig and look cool doing it! This is the brand new, just released ScalerFab Element RC Enduro Sendero Roll Bar. Simple, yet strong and full of SCALE! ScalerFab Axial Adventure SCX10 III Base Camp Roll Bar Specifications:-Hand-welded steel 3/16 rod-Approx. 50mm tall x 185mm wide-Angled slightly towards body to...

After market Chassis/Body? Not problem! We're trying out a new way for you to build the custom bumper to your specs using a base model of choosing what best fits your build. Comp-Style Bumper with Trail Bar or Stinger Choose width, height, and options below! Specifications: - 115mm wide w/ differing bracket widths-...

After market Chassis/Body? Not problem! We're trying out a new way for you to build the custom bumper to your specs using a base model of choosing what best fits your build. Comp-Style Bumper with Trail Bar or Stinger Choose width, height, and options below! Specifications: - Bumper fits tight to the frame...

ScalerFab's RC Scale Welded Steel Ultra Low-Profile Comp-Style Front Bumper for RC4WD C2X w/ Mohave Body. Specifications: - Approx. 82mm wide with 5mm raised brackets- Bumper fits tight to the frame for the best approach angle possible.- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer...

ScalerFab's RC Scale Welded Steel Narrow Winch Front Bumper with Trail Bar for RC4WD C2X w/ Mohave Body. Specifications: - Approx. 115mm wide with 5mm raised brackets- Some fore/aft adjustment- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and 8274 Winch, 3Racing Winch, and SSD Ox Power Winch mounting pattern)-...

Full-size Steel, welded rear bumper for theTraxxas TRX4 1970's Series (Chevy K5 Blazer, K10 Truck, F150 Truck) Adventure-ready, this 1/10 scale full-size rear bumper for the Traxxas TRX4 1970's Series brings strength and a low profile to your Chevy K5 Blazer, K10 Truck, or F150 Truck. Experience an exciting new level...