Search Results

Wraith Rock Sliders with Skid PlatesSteel Frame-mounted Rock Sliders for Axial Wraith. * Mounts using existing holes in frame- see photos * Steel construction - Hand Made/Welded. **Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below: -Raw Steel: We recommend a raw...

ScalerFab Welded Steel Rear Bumper for Axial SCX10/ SCX10 2 Jeep XJ Cherokee *Pictured with optional License Plate Recess Inspire your adventurous side with the classic style of a ScalerFab Rear bumper for the SCX10 II XJ Rear Bumper. Made for the daring off-roader, this bumper adds a touch of ruggedness to your...

SCX10/ SCX10 2 Rock SlidersSteel Frame-mounted Rock Sliders w/ Optional Add-Ons Specifications:* 155mm-177mm (depending on body/tire size) Custom sizes available- enter in Options -*NOTE: 177mm length - Fits 1.9 stock tires on stock wheels, others may not fit.* Built in front and rear link riser mounts* Mounts using existing holes in frame...

ScalerFab Welded Steel Rear Bumper for Axial SCX10 Honcho. Enhance the appearance and performance of your trail rig with this SCX10 Honcho Rear Bumper. This scale accessory adds a touch of ruggedness and style to your vehicle, surpassing the limitations of the stock bumper. Upgrade with confidence and achieve the ultimate...

ScalerFab RC Scale Heavy-Duty Hybrid Land Anchor ***THIS IS NOT A FULL-SIZE ITEM! This is for a 1:10 scale rc (radio controlled) vehicle! Do not order for your full size vehicle. See measurements below. Laser-cut, hand welded w/ main shovel and added harpoon-style hook on back-bone. Finished in Rustoleum Truck Bed Coating...

SCX10 Front Bumper mounting brackets. Sold in Pairs. * Laser cut from 14ga steel * 7mm fore/aft adjustable mounting slots * 0mm height offset (sits even with top of frame rails)

ScalerFab Welded Steel Narrow Front Bumperw/ Stinger for Axial SCX10/SCX10 II Jeep Rubicon, CRC Wrangler Unlimited, Deadbolt/G6, etc. Sits even with the top of the frame rails. For RAISED brackets (+20mm above top of frame rails), see our selection HERE **Some pictures may depict optional add-ons. Winch not included. Specifications:...

Welded Steel Front Bumper for Axial Wraith Jeep Wrangler Poison Spyder or Spawn with Trail Bar **Some pictures may depict optional add-ons. Specifications:- 115mm wide- Mounts using existing holes and hardware (hardware not included)- Steel construction - welded.- Pre-drilled to accept RC4WD Warn 9.5cti winch - underside is accessible. WILL NOT FIT...

RC Scale Steel Large Universal Basket-Style Roof Rack (shown on the Proline Jeep Rubicon Body) Specifications:* Pre-drilled for SCX10 Jeep Rubicon. May require drilling mounting holes on other bodies.*Same base as our low-profile roof rack, but with raised wrap-around border.*Plenty of room to mount lights front/rear with added protection of...

Steel, welded rear bumper for a SCX10/SCX10 II NuKizer. ***Body will need to be trimmed for custom fit. ***Some Photos depict optional Add-ons, which may be an additional cost. Engineered with precision and style, the Full-Width Rear Bumper for Axial SCX10/SCX10 II NuKizer offers unparalleled performance and a sleek, scale look. Dominate...

ScalerFab Welded Steel Rear Bumper for Axial SCX10 Jeep Rubicon. Upgrade your SCX10 Jeep Rubicon with our rear bumper, featuring classic jeep styling and tough Scalerfab armor for ultimate protection. Dominate any terrain with confidence and style. Specifications:--190mm width- Adjustable mounting positions/depths - allows for better departure angle over stock, or...

Welded Steel Rear Bumper for Axial Wraith Jeep Wrangler Poison Spyder or Spawn Upgrade your ride with the Wraith Rear Bumper! Made of durable steel, this bumper adds a touch of style and maximum performance to your vehicle. Perfect for those who love a little extra flair in their off-roading adventures. Specifications:-...

Welded Steel Rear Bumper for Axial Wraith Jeep Wrangler Poison Spyder or Spawn with Stinger **Some pictures may depict optional add-ons. Specifications:- Mounts using existing holes and hardware (hardware not included)- Steel construction - welded.- Pre-drilled to accept RC4WD Warn 9.5cti winch - underside is accessible. WILL NOT FIT Warn 8274 winch....

G-Made Sawback 4-pt. Roll BarSteel roll bar for G-made Sawback. Mounts onto body. Great for light use. ***We recommend the steel backing plates add-on for medium to heavy use to prevent body damage when rolled. -3/16" solid steel -Hand welded **Requires drilling 4 holes in body. Hardware included.

ScalerFab RC Scale Standard Land Anchor ***THIS IS NOT A FULL-SIZE ITEM! This is for a 1:10 scale rc (radio controlled) vehicle! Do not order for your full size vehicle. See measurements below. Laser-cut, hand welded w/ shovel front. Sprayed with Rustoleum Truck Bed Coating for added durability. Specifications:-approx. 110mm x 30mm x 50mm

Front Bumper with Trail Bar for the G-Made Sawback Specifications: - 115mm wide, Class 1 option is 167mm wide- Mounts using existing hardware.- Steel construction - Hand Made/Welded.- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and 8274 Winch, 3Racing Winch, and SSD Ox Power Winch mounting pattern) **Please Note: Our finish...

ScalerFab Welded Steel Prerunner Series Raised Front Bumper for Axial SCX10/SCX10 II SR5/Honcho/Power Wagon/ Nukizer Also fits the 4-Runner body WITHOUT the plastic front bumper. (Check width measurements and adjust in order notes, if needed) If leaving plastic front bumper, see the XJ Prerunner Series bumper. *Additional Options may be...

Full-size Steel, welded rear bumper for the G-Made Sawback w/ Tire Carrier and Jerry Can Mount Specifications: *Note: pictures mounted on vehicle show an older version with the shackle mounts on the back of the bumper. Please see updated pictures of shackle mounts welded below bumper for best departure angle....

ScalerFab Welded Steel Rear Bumper for Axial SCX10 Deadbolt/G6. Take your RC to the next level with the ScalerFab Deadbolt/G6 Rear Bumper! Increase your style and performance with one of our most popular items for this platform. Dominate on any terrain and stand out from the pack. Upgrade now and...

ScalerFab Welded Steel Narrow Front Bumper w/ Trail Bar for Axial SCX10/SCX10 II Jeep Rubicon, CRC Wrangler Unlimited, Deadbolt/G6, etc. Sits even with the top of the frame rails. For RAISED brackets (+20mm above top of frame rails), see our selection HERE **Some pictures may depict optional add-ons. Winch not...