Search Results

Full-size Steel, welded front bumper for the SCX10/SCX10 II Power Wagon, Honcho, and Nukizer Specifications:-190mm wide-Bumper Top Plate sites approx. 20mm above the top of the frame rail.- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper...

ScalerFab Welded Steel Narrow Raised Front Bumper with Trail Bar for Axial SCX10 Honcho/Pro-Line SR5(Optional Fairlead Mount Shown) **Some pictures may depict optional add-ons. Winch not included. Specifications:- Requires trimming of plastic bumper for Pro-Line SR5 Body- Mounts using existing holes in frame - does not mount like stock plastic bumper(s)...

Universal Rear Bumper mounting brackets. Sold in Pairs. * Laser cut from 14ga steel * 70mm overall length (can be trimmed by builder) * 25mm mounting slot

Laser-Cut rock slider, custome chassis, and custom cage mounting brackets for Wraith. Sold in Pairs. * laser cut from 16ga steel * 135mm x 10mm * Wraith skid plate bolt pattern

Vaterra Ascender Front Bumper mounting brackets. Sold in Pairs. * Laser cut from 14ga steel * 10mm fore/aft adjustable mounting slots * 0mm height offset (sits even with top of frame rails) * 83m overall length (can be trimmed by builder)m

Universal hitch/bumper mounting brackets. Sold in Pairs.* Laser cut from 16ga steel* +/- 25mm height offset (up/down, depending upon orientation- can be trimmed by builder) * 17mm mounting slot

Universal Fairlead Mount. * Laser cut from 16ga steel * 30mm x 85mm generic plate (can be trimmed by builder) * 31.5mm bolt pattern (same as RC4WD WARN 9.5cti winch)

RC4WD Trail Finder 2 (TF2/TF2 LWB) Double Bar Rock SlidersSteel Frame-mounted Double Rock Sliders for RC4WD Trail Finder 2 Mohave, Marlin, and LWB Mojave bodies. *Main bar approx. 160mm long x 45mm offset from frame rails (LWB approx. 185mm x 43mm offset) *Mounts using existing holes in frame (hardware not included) - see photos * Steel...

Wraith Rock SlidersSteel Frame-mounted Rock Sliders for Axial Wraith w/ Optional Add-Ons Specifications:* Mounts using existing holes in frame- see photos * Steel construction - Hand Made/Welded. **Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below: -Raw Steel: We recommend...

Laser-Cut rock slider, custom chassis, and custom cage mounting brackets for Vaterra Ascender. Sold in Pairs. * 100mm x 12mm * Ascender skid plate bolt pattern w/ tab to retain stock battery tray (additional hardware and spacers may be required- not included)

Universal Rear Bumper mounting brackets- long. Sold in Pairs. * Laser cut from 14ga steel * 100mm overall length (can be trimmed by builder) * 25mm mounting slot

Full-size Steel, welded front bumper for the SCX10/ SCX10 2 XJ (Also fits on the Traxxas TRX4 Chassis with the XJ body)*Pictures depict optional add-ons Specifications:-205mm wide- Raised brackets specifically for XJ Body- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and SSD Ox Power Winch mounting pattern)- Mounts using...

ScalerFab Prerunner Series Welded Steel Rear Bumper for Axial SCX10/SCX10 II Deadbolt/G6. Specifications:-130mm width- Mounts using existing holes in frame and requires drilling (2) holes or enlarging (2) existing holes for secure mounting (hardware not included)- Steel construction - Hand Made/Welded. **Please Note: Our finish options provide a superficial coating and will...

Universal Rear Bumper mounting brackets- raised. Sold in Pairs. * Laser cut from 12ga steel * 70mm overall length (can be trimmed by builder) * +5mm height offset (can be trimmed by builder) * 25mm mounting slot

RR10 Bomber Rock Sliders with Skids Steel Frame-mounted Rock Sliders for Axial RR10 Bomber. * Mounts using existing hardware and existing holes in frame (hardware not included). * Steel construction - Hand Made/Welded. INSTALL INSTRUCTIONS CAN BE FOUND HERE or watch the video below: **Please Note: Our finish options provide a superficial coating and...

Toughen up and go full-throttle with the ScalerFab Bomber Front Bumper. The solid steel construction, backed by a lifetime warranty, means you can go beyond the trail with confidence! RR10 Bomber Front Bumper w/ Stinger **Some pictures may depict optional add-ons. * Mounts using existing holes and hardware (hardware not included). Will...

ScalerFab Welded Steel Pro Series Narrow Raised Front Bumper with Trail Bar for Axial SCX10 Honcho/Pro-Line SR5 Body(Optional Fairlead Mount Shown) **Some pictures may depict optional add-ons. Winch not included. Specifications:- 115mm wide- Requires trimming of plastic bumper for Pro-Line SR5 Body- Laser-cut Gussets added for strength and added scale...

Full-size Steel, welded Prerunner Series Front Bumper for the SCX10/ SCX10 2 XJ Body- (Also fits on the Traxxas TRX4 Chassis with the XJ body) ALSO FITS THE PRO-LINE 4-Runner body WITH the plastic front bumper. If removing plastic front bumper, see the Honcho Raised Prerunner Series bumper and add custom...

ScalerFab Welded Steel Prerunner Series Rear Bumper for Axial SCX10/ SCX10 2 XJ (Also fits on the Traxxas TRX4 Chassis with the XJ body) Specifications:--207mm width with wrapped ends- Adjustable mounting positions/depths - allows for better departure angle over stock- Mounts using existing holes in frame and requires drilling (2) holes - does...

Welded Steel Hitch for Axial SCX10 * Mounts using existing holes and requires drilling (2) holes (hardware not included) * Steel construction - welded. * Comes with a HPI 4.8mm Ball Stud installed (welded) and (1) Lunsford 4.8mm Super Duty Ball Cup for Trailer * Comes with Safety Chain Loops *Painted in Rustoleum Truck Bed Coating