Search Results

ScalerFab Welded Steel Prerunner Series Front Bumper for Axial SCX10/SCX10 II Jeep Rubicon Specifications:- 150mm wide- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and SSD Ox Power Winch mounting pattern)- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not...

ScalerFab Comp-Style Pro Series Welded Steel Narrow Front Bumper w/ Stinger for Axial SCX10/SCX10 II Jeep Rubicon, CRC Wrangler Unlimited, Deadbolt/G6, etc. Sits even with the top of the frame rails. For RAISED brackets (+20mm above top of frame rails), see our selection HERE *Additional Options may be available one...

SCX10/ SCX10 2 Double Bar Rock Sliders w/ Skid PlatesSteel Frame-mounted Rock Sliders w/ Optional Add-Ons Specifications:* 155mm-177mm (depending on body/tire size) Custom sizes available- enter in Options -*NOTE: 177mm length - Fits 1.9 stock tires on stock wheels, others may not fit.* Mounts using existing holes in frame (hardware not included)*...

Full-size Steel, welded front bumper w/ Stingerfor the SCX10/ SCX10 2 XJ- (Also fits on the Traxxas TRX4 Chassis with the XJ body)*Pictures depict optional add-ons Specifications:-205mm wide- Raised brackets specifically for XJ Body- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and SSD Ox Power Winch mounting pattern)- Mounts...

Add scale points to your rig, not weight! These super light ScalerFab Aluminum Sand Ramps will get you over obstacles without weighing down you rig. Need I say more? Aluminum Sand Ramps *Approximately 2" x 6"

Welded Steel Hitch for Vaterra Ascender * Mounts using existing holes and requires drilling (2) holes (hardware not included) * Steel construction - welded. * Comes with a HPI 4.8mm Ball Stud installed (welded) and (1) Lunsford 4.8mm Super Duty Ball Cup for Trailer * Comes with Safety Chain Loops *Painted in Rustoleum Truck Bed Coating

Full-size Steel, welded front bumper for a SCX10/SCX10 II Power Wagon, Honcho, and Nukizer***Body will need to be trimmed for custom fit.**Some Pictures may depict Optional Add-Ons Specifications:- 190mm wide- Bumper Top Plate sites approx. 20mm above the top of the frame rail.- Mounts using existing holes in frame - does not...

Fits the following bodies, and may fit others (bumper sits even with top of frame rails and offers some fore/aft adjustment): -Jeep Wrangler-Pro-Line SR5 (with the stock plastic bumper)-Pro-Line Jeep Wrangler-G6/Deadbolt-CRC Jeep Wrangler Unlimited-Pro-Line Racing 46 Power Wagon With over 50 possible combinations to choose from on this bumper, you...

SCX10/ SCX10 2 Rock Sliders w/ Skid PlatesSteel Frame-mounted Rock Sliders w/ Optional Add-Ons Specifications:* 155mm-177mm (depending on body/tire size) Custom sizes available- enter in Options* Mounts using existing holes in frame (hardware not included)* Steel construction - Hand Made/Welded. **Please Note: Our finish options provide a superficial coating and will scratch/chip under...

Steel Welded Rear Bumper for a Axial SCX10 Power Wagon. ***Body will need to be trimmed for custom fit. ***Some Photos depict optional Add-ons, which may be an additional cost. Upgrade your RC with the best! The SCX10 Power Wagon Rear Bumper offers both scale appearance and top-notch performance. Don't settle...

ScalerFab Welded Steel Narrow Front Bumper w/ Trail Bar for Traxxas TRX-4 Defender 90 Adjustable Mounting Options: -Mount with stock body post location by cutting 2 small slits in the body to accommodate the mounting brackets (see picture) -Mount with body posts 1 hole higher (5mm) without cutting body- also allows for...

Full-size Steel, welded front bumper w/ trail bar for the SCX10 II XJ. (Also fits on the Traxxas TRX4 Chassis with the XJ body)*Pictures depict optional add-ons Specifications:-205mm wide- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and SSD Ox Power Winch mounting pattern)- Mounts using existing holes in...

Get the best departure angle possible with the ScalerFab steel Prerunner Series Rear Bumper for RC4WD Trail Finder 2! Specifications:--180mm overall width- Adjustable mounting positions/depths - allows for better departure angle over stock- Mounts using existing holes in frame.- Steel construction - Hand Made/Welded. **Please Note: Our finish options provide a superficial coating...

Get the best departure angle possible with the ScalerFab steel Prerunner Series Rear Bumper for RC4WD Marlin Crawler Trail Finder 2! Specifications:--180mm overall width- Adjustable mounting positions/depths - allows for better departure angle over stock- Mounts using existing holes in frame. Does not mount like stock bumper. Requires removal of rear...

Ditch the bulk and boost performance with this ScalerFab Full-Size Front Bumper for the Redcat Everest Gen7 or Gen7 Pro! Full-size Steel, welded full-size front bumper for Redcat Everest Gen7/ Gen7 Pro**Some Pictures may depict Optional Add-Ons Specifications:- 190mm wide- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and...

ScalerFab Welded Steel Prerunner Series Front Bumper for Redcat Everest (Gen 7/ Gen 7 Pro) Specifications:- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) - see photos (Longer hardware recommended- hardware not included)- Steel construction - Hand Made/Welded.- Has slots for adjustable fore/aft mounting **Please Note: Our finish...

Our Raised Comp-Style SR5 Trail Armor is specifically made for the best possible approach angle while still qualifying for your SORRCA scale points, which is why it only works with a chassis-mounted servo winch. For products that work with a bumper-mounted winch, see our Raised Narrow and Prerunner Series Bumpers. ScalerFab Welded...

Replica Full-size Steel, welded front bumper for the Traxxas TRX4 Defender with Trail Bar, Top Fairlead Mount and Shackle Mounts Adjustable Mounting Options: -Mount with stock body post location by cutting 2 small slits in the body to accommodate the mounting brackets (see picture) -Mount with body posts 1 hole higher (5mm)...

Raised SCX10 Front Bumper mounting brackets. Sold in Pairs. Use this bracket to build your own OR for 2 additional mounting options to raise the stock plastic SCX10 Bumper to eliminate bumper/body gaps. Adjust the height an additional 10 or 20mm, depending on body style or desired look. **Additional Hardware needed...