Search Results

Protect your rig and look cool doing it! This is the brand new, just released ScalerFab Element RC Enduro Sendero Roll Bar. Simple, yet strong and full of SCALE! ScalerFab Element RC Enduro Sendero Roll Bar Specifications:-Hand-welded steel 3/16 rod-Approx. 80mm tall x 170mm wide-Mounts by drilling 4 holes into truck bed,...

Protect your rig and look cool doing it! This is the brand new, just released ScalerFab Element RC Enduro Trailwalker Roll Bar. Simple, yet strong and full of SCALE! ScalerFab Element RC Enduro Trailwalker Roll Bar Specifications:-Hand-welded steel 3/16 rod-Approx. 63mm tall x 165mm wide-Mounts using 2 holes on wheel wells and...

Full-Size Steel, Welded Front Bumper For The Traxxas TRX-6 Mercedes-Benz G 63 AMG 6x6 Specifications:-192mm wide-Bumper Top Plate sites approx. 20mm above the top of the frame rail.**REQUIRES Trimming of body for fitment. Bumper is not made to fit a winch.- Mounts using existing holes in frame - does not mount like stock...

Vaterra Ascender Standard Rock SlidersSteel Frame-mounted Standard Rock Sliders for Vaterra Ascender. *120-160mm length, depending on Body (K10, 1972 Bronco & F100 will be slightly angled up to match body line, K5 is straight out) *No need to remove stock battery tray- can be mounted with sliders using spacers and...

Laser-cut mounting brackets with built-in Front/Rear Link Riser Mount Universale fit for SCX10/SCX10 II, Element RC, Traxxas TRX4 & gen 7/8/ (with the link riser mounts removed), Vaterra Ascender, G-Made Sawback, and ECX Barrage. Also use for custom chassis, or custom cage builds. Sold in pairs. * Built-in Front & Rear...

Scale Winch/Tow Hook- Stainless Steel *Simple, strong design- perfect for use as a winch or tow hook.*Laser-cut out of 14-gauge stainless steel *7mm opening to allow for use with all Axial plastic roll cages

ScalerFab Tabs (10-Pack)Pack of 10. The tabs used in our fab shop- now available for purchase! *10-pack*Laser-cut out of 14 gauge mild steel*10mm x 10mm*2.5mm hole (can be drilled and tapped for 3mm hardware)

Our popular Retro Series is here for the Axial SCX10 III Bronco! This is the perfect mix of scale and throwback, with double tube work for that classic, old-school look! Pairs perfectly with the Retro Series Rear Bumper. Full-size Steel, welded Retro Series Front Bumper for the Axial SCX10 III...

ScalerFab Welded Steel Narrow Winch Front Bumper for Axial SCX10III Jeep Wrangler Bronco- Trail Bar & Stinger options available. *This bumper is made for a bumper-mounted winch and includes pre-drilled holes with the RC4WD Warn Winch pattern. Click for Low-Profile Narrow Bumper without winch holes. TO MOUNT WINCH: You will need...

Full-size Steel, welded rear bumper for the Element RC Enduro Knightrunner Specifications:- 200mm wide- Mounts using existing holes in frame. Does not mount like stock plastic bumper(s) - Longer Hardware recommended (hardware not included)- Steel construction - Hand Made/Welded. **Please Note: Our finish options provide a superficial coating and will scratch/chip under normal...

After market Chassis/Body? Not problem! We're trying out a new way for you to build the custom bumper to your specs using a base model of choosing what best fits your build. Comp-Style Bumper with Trail Bar or Stinger Choose width, height, and options below! Specifications: - Bumper fits tight to the frame...

After market Chassis/Body? Not problem! We're trying out a new way for you to build the custom bumper to your specs using a base model of choosing what best fits your build. Comp-Style Bumper with Trail Bar or Stinger Choose width, height, and options below! Specifications: - 115mm wide w/ differing bracket widths-...

The Retro Series features double tube work for that classic, old-school look! Pairs perfectly with the Retro Series Front Bumper HERE ScalerFab Welded Steel Prerunner Series Rear Bumper for Axial SCX10 III Bronco Specifications:-- 215mm Wide- Requires drilling one (1) additional hole in plastic fender in order to use both...

ScalerFab Steel Axial Racing SCX10III Bronco Adjustable, Bolt- On Rock SlidersSteel Frame-mounted Rock Sliders w/ Optional Add-Ons (Shown in pictures) mount directly to the stock location of the plastic skid plate to replace the stock rock sliders. ALL NEW Body Capture Bar Option available! Our Body Capture Bar supports the...

Our most popular series has made it to the SCX10 III Bronco! The Prerunner series was designed for a combination of looks and performance under scale use. Made from 3/16" rod, the Prerunner Front Bumper for the SCX10 III Bronco is a low-profile, scale trail armor option. Full-size Steel, welded Prerunner Series...

RC4WD C2X Rock Sliders w/ Optional Skid Plates Steel Rock Sliders made specifically for the RC4WD C2X. Specifications:-Approx. 175mm long x 40mm angled offset (Front slightly shorter than body to avoid rubbing when at full turn/compression) -Angled to raise to body line -Mounts by screwing 4 button screws into the underside of...

This is the brand new, just released ScalerFab Roll Bar for the Vanquish VS4-10 Pro/Ultra Origin Truck. Simple, yet strong and full of SCALE! Vanquish VS4-10 Pro/Ultra Roll Bar Specifications:**Some Pictures Depict Optional Add-Ons-Approx. 70mm tall x 185mm wide-Hand-welded steel 3/16 rod-Mounts by drilling 4 holes into truck bed, hardware not included....

ScalerFab Welded Steel Prerunner Series Rear Bumper for Element RC Enduro Knightrunner Trail Truck Specifications:--approx. 205mm width with wrapped ends- Adjustable mounting positions/depths - allows for better departure angle over stock- Mounts using existing holes in frame. Does not mount like stock plastic bumper(s) - Longer Hardware recommended (hardware not included)- Steel...

ScalerFab Full-Width Welded Steel Rear Bumper for the Axial SCX10III Base Camp Add a little scale to your RC! This classic style bumper offers a series of customized options. Add a license plate recess or hitch receiver for an ultra scale appearance. Specifications: - Approx. 200mm wide- Steel construction - Hand Made/Welded. **Please Note: Our...

ScalerFab's Builder Brackets take the guesswork out of fabbing your own bumpers. The SCX10 III Brackets/Adapter fit inside the c-channel frame rails. They do not mount to the outside of the frame rails like some of our other brackets. They come in a set of 2 and price includes FREE US SHIPPING....