Search Results

Full-size Steel, welded front bumper for the Axial SCX10 II UMG10 Unimog*Pictures depict optional add-ons. See below for additional mounting instructions. Specifications:-190mm wide- Will not fit a bumper-mounted winch (this rig is specifically built for a servo winch)- Steel construction - Hand Made/Welded.- Mounts using existing holes in frame - does not mount like...

ScalerFab Welded Steel Rear Bumper for Axial SCX10/ SCX10 2 Jeep XJ Cherokee *Pictured with optional License Plate Recess Inspire your adventurous side with the classic style of a ScalerFab Rear bumper for the SCX10 II XJ Rear Bumper. Made for the daring off-roader, this bumper adds a touch of ruggedness to your...

ScalerFab Welded Steel Narrow Front Bumperw/ Stinger for Axial SCX10/SCX10 II Jeep Rubicon, CRC Wrangler Unlimited, Deadbolt/G6, etc. Sits even with the top of the frame rails. For RAISED brackets (+20mm above top of frame rails), see our selection HERE **Some pictures may depict optional add-ons. Winch not included. Specifications:...

SCX10/ SCX10 2 Double Bar Rock Sliders w/ Skid PlatesSteel Frame-mounted Rock Sliders w/ Optional Add-Ons Specifications:* 155mm-177mm (depending on body/tire size) Custom sizes available- enter in Options -*NOTE: 177mm length - Fits 1.9 stock tires on stock wheels, others may not fit.* Mounts using existing holes in frame (hardware not included)*...

ScalerFab Welded Steel Narrow Raised Front Bumper with Stinger for Axial SCX10 Honcho/Pro-Line SR5 **Some pictures may depict optional add-ons. Winch not included. Specifications:- Requires trimming of plastic bumper for Pro-Line SR5 Body- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware...

ScalerFab Welded Steel Low-Profile Rear Bumper for Axial SCX10/SCX10 II Honcho. Specifications:- Slightly wider than the width of the frame rails. ~100mm- Mounts using existing holes in frame and requires drilling (2) holes or enlarging (2) existing holes for secure mounting (hardware not included)- 3/16" Steel rod construction - Hand Made/Welded....

SCX10/ SCX10 2 Double Bar Rock SlidersSteel Frame-mounted Double Bar Rock Sliders (shown w/ Optional Add-Ons) Specifications:* 155mm-177mm (depending on body/tire size) Custom sizes available- enter in Options -*NOTE: 177mm length - Fits 1.9 stock tires on stock wheels, others may not fit.* Built-in front and rear link riser mounts.* Mounts using...

SCX10 II XJ Front Bumper mounting brackets. Sold in Pairs. * Laser cut from 14ga steel * Fore/aft adjustable mounting slots * 10mm height offset (sits 10mm above top of frame rails)

Low-Profile Full-size Steel, welded front bumper for the SCX10 II UMG10 Unimog*Pictures depict optional add-ons. See below for additional mounting instructions. Specifications:-190mm wide- Will not fit a bumper-mounted winch (this rig is specifically built for a servo winch)- Steel construction - Hand Made/Welded.- Mounts using existing holes in frame - does not mount like...

Vaterra Ascender Standard Rock SlidersSteel Frame-mounted Standard Rock Sliders for Vaterra Ascender. *120-160mm length, depending on Body (K10, 1972 Bronco & F100 will be slightly angled up to match body line, K5 is straight out) *No need to remove stock battery tray- can be mounted with sliders using spacers and...

Laser-Cut rock slider, custom chassis, and custom cage mounting brackets for Vaterra Ascender. Sold in Pairs. * 100mm x 12mm * Ascender skid plate bolt pattern w/ tab to retain stock battery tray (additional hardware and spacers may be required- not included)

Welded Steel Front Bumper for Axial Wraith Jeep Wrangler Poison Spyder or Spawn with Trail Bar **Some pictures may depict optional add-ons. Specifications:- 115mm wide- Mounts using existing holes and hardware (hardware not included)- Steel construction - welded.- Pre-drilled to accept RC4WD Warn 9.5cti winch - underside is accessible. WILL NOT FIT...

Our Prerunner Series Comp-Style for the VS4-10 Phoenix is specifically made for the best possible approach angle, which is why it is designed to be used with a chassis-mounted servo winch. ScalerFab Welded Steel Prerunner Series Comp-Style Front Bumper for VS4-10 Phoenix *Shown with optional Front Fairlead Mount Specifications: - approx. 150mm...

ScalerFab Welded Steel Rear Bumper for the Vanquish VS4-10 Phoenix Transform your vehicle with the Vanquish VS4-10 Phoenix Rear Bumper! With its sleek design and enhanced performance, this upgrade is sure to make a statement. Rise from the ashes and conquer any terrain with confidence. Upgrade now for an unbeatable driving...

Wraith Rock SlidersSteel Frame-mounted Rock Sliders for Axial Wraith w/ Optional Add-Ons Specifications:* Mounts using existing holes in frame- see photos * Steel construction - Hand Made/Welded. **Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below: -Raw Steel: We recommend...

Wraith Rock Sliders with Skid PlatesSteel Frame-mounted Rock Sliders for Axial Wraith. * Mounts using existing holes in frame- see photos * Steel construction - Hand Made/Welded. **Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below: -Raw Steel: We recommend a raw...

Laser-Cut rock slider, custome chassis, and custom cage mounting brackets for Wraith. Sold in Pairs. * laser cut from 16ga steel * 135mm x 10mm * Wraith skid plate bolt pattern

Welded Steel Front Bumper for Axial Wraith Jeep Wrangler Poison Spyder or Spawn with Stinger**Some pictures may depict optional add-ons. Specifications:- 115mm wide- Mounts using existing holes and hardware (hardware not included)- Steel construction - welded. **Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons...

Get the best departure angle possible with the ScalerFab steel Prerunner Series Rear Bumper for RC4WD Trail Finder 2! Specifications:--180mm overall width- Adjustable mounting positions/depths - allows for better departure angle over stock- Mounts using existing holes in frame.- Steel construction - Hand Made/Welded. **Please Note: Our finish options provide a superficial coating...

Axial Full-Width Steel, Welded Front Bumper for the Axial SCX10 III Base Camp. Full width and full scale! This Class 1 worthy low-profile front bumper allows for full tire clearance under full turn & compressionIt even includes the ability to mount a winch behind the grill. (MADE FOR STOCK VEHICLE- Any modifications...