- 1979 F150
- 2021 Bronco
- Ascender 1972 Bronco
- Ascender K5 Blazer
- Barrage
- CFX-W
- Chevrolet K10 Truck
- Chevy K5 Blazer
- Defender D90
- Enduro Sendero
- Enduro Sendero SE
- Enduro Trailwalker
- Enduro Trailwalker (Black)
- Enduro Utron Trail truck
- Everest Gen7/Pro
- Gen8 Axe Edition
- Gen8 Scout II
- Knightrunner
- Komodo GS01
- Marlin Crawler TF2
- Sawback
- SCX10 II Chevy Blazer
- SCX10 II XJ Cherokee
- SCX10 III Base Camp
- SCX10 III Bronco
- SCX10 III Jeep Gladiator
- SCX10 III Jeep Wrangler JLU
- SCX10/SCX10 II G6/Deadbolt
- SCX10/SCX10 II Honcho
- SCX10/SCX10 II Jeep Rubicon
- SCX10/SCX10 II Jeep Wrangler Unlimited CRC
- SCX10/SCX10 II NuKizer
- SCX10/SCX10 II Ram Power Wagon
- SCX10III CJ-7
- Sport
- Trail Finder 2
- VS4 Phoenix
- VS4-10 Origin
- VS4-10 Pro
- VS4-10 Ultra
- Wraith/Spawn (2.2)
- 1979 F150
- 2021 Bronco
- Ascender 1972 Bronco
- Ascender K5 Blazer
- Barrage
- CFX-W
- Chevrolet K10 Truck
- Chevy K5 Blazer
- Defender D90
- Enduro Sendero
- Enduro Sendero SE
- Enduro Trailwalker
- Enduro Trailwalker (Black)
- Enduro Utron Trail truck
- Everest Gen7/Pro
- Gen8 Axe Edition
- Gen8 Scout II
- Knightrunner
- Komodo GS01
- Marlin Crawler TF2
- Sawback
- SCX10 II Chevy Blazer
- SCX10 II XJ Cherokee
- SCX10 III Base Camp
- SCX10 III Bronco
- SCX10 III Jeep Gladiator
- SCX10 III Jeep Wrangler JLU
- SCX10/SCX10 II G6/Deadbolt
- SCX10/SCX10 II Honcho
- SCX10/SCX10 II Jeep Rubicon
- SCX10/SCX10 II Jeep Wrangler Unlimited CRC
- SCX10/SCX10 II NuKizer
- SCX10/SCX10 II Ram Power Wagon
- SCX10III CJ-7
- Sport
- Trail Finder 2
- VS4 Phoenix
- VS4-10 Origin
- VS4-10 Pro
- VS4-10 Ultra
- Wraith/Spawn (2.2)
SCX10 Honcho Rear Bumper
ScalerFab Welded Steel Rear Bumper for Axial SCX10 Honcho.
Enhance the appearance and performance of your trail rig with this SCX10 Honcho Rear Bumper. This scale accessory adds a touch of ruggedness and style to your vehicle, surpassing the limitations of the stock bumper. Upgrade with confidence and achieve the ultimate off-road experience.
-130mm width (same as G6/Deadbolt Rear Bumper)
- Mounts using existing holes in frame and requires drilling (2) holes or enlarging (2) existing holes for secure mounting (hardware not included)
- Steel construction - Hand Made/Welded.
**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:
-Flat Black: not as susceptible to chips
-Raw Steel: We recommend a raw steel finish if you intend to coat with a harder finish on your own.
Mounting instructions:
We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.
Lifetime Warranty Info
ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.
If you have an issue with your item, please leave detailed info below or you can mail in with info.
Items for warranty repair/replacement can should be mailed to:
ScalerFab, Inc
PO Box 130
Divide, CO 80814
Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)
SCX10/SCX10 II Honcho "Barely There" Rear Bumper
- Slightly wider than the width of the frame rails. ~100mm
- Mounts using existing holes in frame and requires drilling (2) holes or enlarging (2) existing holes for secure mounting (hardware not included)
- 3/16" Steel rod construction - Hand Made/Welded.
**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:
-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,
-Flat Black: Superficial matte black coating, will scratch under normal use.
-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE
Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.
*Recommend hardware mounting kits available at the top of the page as an optional add-on.**
Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.
Lifetime Warranty Info
ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.
If you have an issue with your item, please leave detailed info below or you can mail in with info.
Items for warranty repair/replacement can should be mailed to:
ScalerFab, Inc
PO Box 130
Divide, CO 80814
Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)
Loved the quality and the fit would recommend it to anyone
I did the custom measurement. Bumpers fit perfectly on my G Speed V3 custom portal build. Already recommended to my buddies. I'll be ording a set of bumpers for my next build 👍
Great for if you don’t wanna have to fabricate your own bumpers or don’t have the time to. All in all good product and company. Would recommend.