Pro Series Full-Width Front Bumper w/ Trail Bar for Traxxas TRX4 1970's Series (K5 Blazer, K10, F150)

$68.95 USD

ScalerFab Pro Series Full-Size Front Bumper with Trail Bar for Traxxas TRX4 Blazer

**Some pictures may depict optional add-ons.

Grab the pro series look for your Traxxas TRX4 Blazer/K10/F150 with this full-width front bumper with an added Trail Bar by ScalerFab for extra defense against the toughest obstacles! It offers a full-width 1/10 scale construction with gussets for strength and authentic scale style.

Specifications:
- 205m- Has slots for adjustable fore/aft mountingm wide depending on body style
- Laser-cut Gussets added for strength and added scale appearance
- Extra attention to detail during finishing process to optimize performance and appearance.
- Mounts using existing holes in frame. Does not mount like stock bumper. Longer hardware recommended. (hardware not included)
- Includes Pre-drilled mounting holes for winch. Requires spacers to raise winch and clear the pro series gussets (not included) Mounting Hole pattern fits RC4WD WARN 9.5cti and 8274 Winch, 3Racing Winch, and SSD Ox Power Winch.
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

Mounting instructions:

We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Lifetime Warranty Info

Name: Pro Series Full-Width Front Bumper w/ Trail Bar for Traxxas TRX4 1970's Series (K5 Blazer, K10, F150)
Brand: Traxxas RC
Price: 68.95 USD
Availability: InStock

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Pro Series Full-Width Front Bumper w/ Trail Bar for Traxxas TRX4 1970's Series (K5 Blazer, K10, F150)

Pro Series Traxxas TRX4 Blazer Full-Size Front Bumper with Trail Bar - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Rc parts

Awsome 👍

Bumper

fits perfect and looks awesome

Pro Series Full-Width Front Bumper w/ Trail Bar for Traxxas TRX4 1970's Series (K5 Blazer, K10, F150)

Full-Width Front Bumper for Traxxas TRX4 1970's Series (K5 Blazer, K10 Truck, F150)

$53.95 USD

Full-size Steel, welded front bumper by ScalerFab, made for the Traxxas TRX4 K5 Blazer/K10/F150.
*Pictures may depict optional add-ons

Rugged and sturdy, this Full-Width Front Bumper for your Traxxas TRX4 1/10 scale RC 1970's Series truck will take your off-road adventures to new levels! With solid construction and a sleek look, you'll be hitting the trails in style. Get ready for your next big adventure with ScalerFab!

Specifications:
-205mm wide
-Optional Trail Bar/Stinger available
-Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and SSD Ox Power Winch mounting pattern)
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

Mounting instructions:

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Full-Width Front Bumper for Traxxas TRX4 1970's Series (K5 Blazer, K10 Truck, F150)

Element RC Enduro Sendero/Sendero HD Full-Size Front Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Retro Series Front Bumper for Traxxas TRX4 1970's Series (Chevy K5 Blazer, K10 Truck, Ford F150 Truck)

$73.95 USD

The Retro Series features double tube work for that classic, old-school look! Pairs perfectly with the Retro Series Rear Bumper HERE.

Full-size Steel, welded Retro Series Front Bumper for the Traxxas TRX4 Chevrolet K5Blazer, K10 Truck and Ford F150 Truck

Specifications:
- Apporx. 205mm inside the curved ends. With curve is 215mm wide
- Mounts using existing hardware
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: not as susceptible to chips

Mountain instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.*

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Retro Series Front Bumper for Traxxas TRX4 1970's Series (Chevy K5 Blazer, K10 Truck, Ford F150 Truck)

Pro Series Narrow Front Bumper for Traxxas TRX-4 1970's Series (K5 Blazer/K10 Truck/F150)

$58.95 USD

ScalerFab Welded Steel Pro Series Narrow Front Bumper w/ Trail Bar or Stinger for Traxxas TRX4 Chevrolet K5 Blazer, K10 truck, and Ford F-150 Truck

Make your Traxxas look cooler than a 70's disco party with this Pro Series Narrow Front Bumper. With sturdy construction and gussets for added strength and that classic scale look, your 1/10 scale Traxxas TRX4 K5 Blazer/K10 Truck/F150 will be driving circles around the scale trails!

Specifications:

- 115mm wide
-Trail Bar or Stinger available
- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and 8274 Winch, 3Racing Winch, and SSD Ox Power Winch mounting pattern)
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories)
- Steel construction - Hand Made/Welded.
- Has slots for adjustable fore/aft mounting

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

Mounting instructions:

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Pro Series Narrow Front Bumper for Traxxas TRX-4 1970's Series (K5 Blazer/K10 Truck/F150)

Narrow Front Bumper for Traxxas TRX-4 1970's Series (K5 Blazer/K10 Truck/F150)

$48.95 USD

ScalerFab Welded Steel Narrow Front Bumper w/ Trail Bar or Stinger for Traxxas TRX4 Chevrolet K5 Blazer, K10 truck, and Ford F-150 Truck

Go off-roading with confidence in your Traxxas TRX-4 1970's Series (K5 Blazer/K10 Truck/F150) with the Narrow Front Bumper with Trail Bar from ScalerFab. Conquer any terrain with its low profile and improved approach angle— perfect for those scale trails.

Specifications:

- 115mm wide
-Trail Bar or Stinger available
- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and 8274 Winch, 3Racing Winch, and SSD Ox Power Winch mounting pattern)
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories)
- Steel construction - Hand Made/Welded.
- Has slots for adjustable fore/aft mounting

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

Mounting instructions:

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Front Bumpers

Lifetime Warranty Info

Customer Reviews

Lifetime Warranty Info

Customer Reviews

Lifetime Warranty Info

Customer Reviews

Lifetime Warranty Info

Customer Reviews

Lifetime Warranty Info

Customer Reviews

Promos

DIY Bungee Cord Tutorial

Collaborate with Us!