Prerunner Series Redcat Racing Gen8 Scout II Front Bumper
Specifications:
- 207mm
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) - see photos (Longer hardware recommended- hardware not included)
- Steel construction - Hand Made/Welded.
- Has slots for adjustable fore/aft mounting
**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:
-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,
-Flat Black: Superficial matte black coating, will scratch under normal use.
-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE
Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.
*Recommend hardware mounting kits available at the top of the page as an optional add-on.**
Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.
ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.
If you have an issue with your item, please leave detailed info below or you can mail in with info.
Items for warranty repair/replacement can should be mailed to:
ScalerFab, Inc
PO Box 130
Divide, CO 80814
Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)
Redcat Racing Gen8 Scout II 1/10 Scale Full-Width Front Bumper
Specifications:
-207mm wide
-Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and SSD Ox Power Winch mounting pattern)
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) - see photos (Longer hardware recommended- hardware not included)
- Steel construction - Hand Made/Welded.
**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:
-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,
-Flat Black: Superficial matte black coating, will scratch under normal use.
-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE
Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.
*Recommend hardware mounting kits available at the top of the page as an optional add-on.**
Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.
ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.
If you have an issue with your item, please leave detailed info below or you can mail in with info.
Items for warranty repair/replacement can should be mailed to:
ScalerFab, Inc
PO Box 130
Divide, CO 80814
Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)
This bumper is awesome! I found a picture from a early prototype and they were able to make it for me. It fits like a glove and has a decent amount of weight to it.
Follow us on Social Media for info on our upcoming sales event and promotions
Watch and learn how to make your own scale bungee cords! Bungee Cord material available HERE
Join our team of collaborators on Facebook and Instagram for a share of the profits! Email us for more info- be sure to include your social media handles.