Comp-Style Bull-Bar Front Bumper for Traxxas TRX4 Sport

$48.95 USD

Fits the following bodies, and may fit others (bumper sits even with top of frame rails and offers some fore/aft adjustment):

-#TRX4 Sport (Some modifications by grinding or cutting will be required to fit with the Sport Inner fenders.)
-Pro-Line 46 Power Wagon

With multiple possible combinations to choose from on this bumper, you can truly build the perfect piece of trail armor for your needs. If you weren't a competitor already, our Comp-Style "bull-bar" Front Bumper will allow you to push the limits of your #Traxxas TRX4 Sport without having to worry about approach angles.

Drive OVER the rocks, don't work around your bumper!

#ScalerFab's RC Scale Welded Steel Ultra Low-Profile Comp-Style Front Bumper for Traxxas TRX4 Sport

Specifications:

- 79mm wide
- 20mm deep top plate w/ approx. some fore/aft adjustment.
- Bumper fits tight to the frame for the best approach angle possible.
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

Name: Comp-Style Bull-Bar Front Bumper for Traxxas TRX4 Sport
Brand: Traxxas RC
Price: 48.95 USD
Availability: InStock

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Traxxas TRX4 Sport Comp-Style Bull-Bar Front Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Very high quality

I really hesitated and waited to buy the bumper for my trx4 because of the price so I looked around at others and none other matched the look I was going for. So glad I went with scaler fab the quality is the best I’ve seen in the rc crawler bumper world, very heavy duty and well put together. Will definitely phurchase more bumpers from them.

What a fit!!

SCALERFAB you done smacked it out of the park. These bumpers stayed in my cart for about 3 days due to pricing but I finally made the move should’ve just ordered them that same day . Needless to say the fit was flawless perfect for my build being able to hide the winch was awesome I do regret not adding d-ring tabs for the rear bumper but oh well just might have to order another one . You best believe I’m ordering bumpers for my next build!!

Trx4 sport

Great craftsmanship, perfect fit , looking forward to ordering more soon!

TRX4 sport comp style bull bar

I haven’t had a chance to get out crawling with the new comp style bull bar but it looks amazing! The build quality is spot on and is very ecstatically pleasing. The thing just looks wicked and can’t wait to get out with it!

Prerunner Series Raised Front Bumper for SCX10/SCX10 II Power Wagon/Nukizer/Honcho/SR5

$63.95 USD

ScalerFab Welded Steel Prerunner Series Raised Front Bumper for Axial SCX10/SCX10 II SR5/Honcho/Power Wagon/ Nukizer

Also fits the 4-Runner body WITHOUT the plastic front bumper. (Check width measurements and adjust in order notes, if needed)

If leaving plastic front bumper, see the XJ Prerunner Series bumper.

*Additional Options may be available one our website, www.scalerfab.com

Specifications:

- approx. 190mm wide
- Requires trimming of plastic bumper for Pro-Line SR5 Body
- Bumper Top Plate sites approx. 20mm above the top of the frame rail.
- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and 8274 Winch, 3Racing Winch, and SSD Ox Power Winch mounting pattern)
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories)
- Steel construction - Hand Made/Welded.
- Has slots for adjustable fore/aft mounting

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Main pic courtesy of @RCbasher83 on IG. #scalerfab for a feature!

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Prerunner Series Raised Front Bumper for SCX10/SCX10 II Power Wagon/Nukizer/Honcho/SR5 - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Quality RC bumper

I got the pre runner bumper for my Trail Honcho and it fit perfectly. Way more realistic than the plastic bumper it came with.

Quality build

Bought this for my Trail Honcho and it is pretty bad ass

Looks Great and fits perfectly

I used this on my SCX10II with proline 2016 Tacoma body, it looks and fits great. No more gap from bumper to body :)

Pro Series Comp-Style SCX10/SCX10 II Front Bumper with Trail Bar

$68.95 USD

ScalerFab Comp-Style Pro Series Welded Steel Narrow Front Bumper w/ Trail Bar for Axial SCX10/SCX10 II Jeep Rubicon, CRC Wrangler Unlimited, Deadbolt/G6, etc.

Bumper fits tight to the frame for the best approach angle possible and will not work with a bumper-mounted winch.

Sits even with the top of the frame rails. For RAISED brackets (+20mm above top of frame rails), see our selection HERE

Specifications:

- 76mm wide
- 20mm deep top plate w/ approx. 12mm of fore/aft adjustment.
- Bumper fits tight to the frame for the best approach angle possible. There is no room to mount a winch due to the Pro Series Gussets.
- Laser-cut Gussets added for strength and added scale appearance
- Extra attention to detail during finishing process to optimize performance and appearance.
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories)

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Pro Series Comp-Style SCX10/SCX10 II Front Bumper with Trail Bar - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Narrow Winch Front Bumper for Axial Racing SCX10 III Jeep Wrangler JLU/Gladiator

$57.95 USD

ScalerFab Welded Steel Narrow Winch Front Bumper for Axial SCX10III Jeep Wrangler JLU/Gladiator- Trail Bar & Stinger options available.

(For the SCX10 III Bronco Winch Front Bumper, Click HERE)

*This bumper is made for a bumper-mounted winch and includes pre-drilled holes with the RC4WD Warn Winch pattern. Click for Low-Profile Narrow Bumper without winch holes.

TO MOUNT WINCH: You will need to flip the winch mounting plate in order to install on bumper.

The ScalerFab SCX10 III bumpers are designed to work with the stock Axial body post mounting system. Bumpers will not mount with any after-market crossmembers or anything that would interfere with the end of the frame rails.

Specifications:

- 115mm wide
- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and 8274 Winch, 3Racing Winch, and SSD Ox Power Winch mounting pattern)
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s)
- Steel construction - Hand Made/Welded.
- No fore/aft adjustment
- Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel.

Mounting Instructions:

1. Bumper is made to slide inside the C-channel of the frame rails.

2. Using included screws, mount by matching holes in the body post mount with holes in the brackets and frame rails, as shown below. *Use included washer between frame rails and body post mount as a spacer.

3. Back screws with a washer and nut.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Narrow Winch Front Bumper for Axial Racing SCX10 III Jeep Wrangler JLU/Gladiator - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Well made bumper. Love the detail. Great addition to my build.

Narrow Winch Front Bumper for Axial Racing SCX10 III Jeep Wrangler JLU/Gladiator

Excellent description of products honestly amazing on quality and precision I ordered stinger front bumper winch mount and eyelets and everything onpoint also ordered rear bumper license plate cut out and single rails like I said everything is best possible quality and perfect fitment perfect gage steel love this product will order more number for my other rigs

Comp-Style SCX10/SCX10 II Front Bumper with Trail Bar

$48.95 USD

Fits the following bodies, and may fit others (bumper sits even with top of frame rails and offers some fore/aft adjustment):

-Jeep Wrangler
-Pro-Line SR5 (with the stock plastic bumper)
-Pro-Line Jeep Wrangler
-G6/Deadbolt
-CRC Jeep Wrangler Unlimited
-Pro-Line Racing 46 Power Wagon

With over 50 possible combinations to choose from on this bumper, you can truly build the perfect piece of trail armor for your needs. If you weren't a competitor already, our Comp-Style Front Bumper w/ Trail Bar will allow you to push the limits of your SCX10/SCX10 2 without having to worry about approach angles.

Drive OVER the rocks, don't work around your bumper!

ScalerFab's RC Scale Welded Steel Ultra Low-Profile Comp-Style Front Bumper with Trail Bar for Axial SCX10/SCX10 II Jeep Rubicon, CRC Wrangler Unlimited, Deadbolt/G6, etc.

**If using on the Pro-Line SR5 body, this is made to fit WITH the stock plastic Bumper for a bull-bar look. For a raised bumper that requires trimming of the plastic bumper, please see our other SR5 listings from link below.

*Sits even with the top of the frame rails. For RAISED brackets (+20mm above top of frame rails), see our selection HERE

Specifications:

- Finished width 79mm wide (74mm standard scx10 bracket width)
- 20mm deep top plate w/ approx. 12mm of fore/aft adjustment.
- Bumper fits tight to the frame for the best approach angle possible.
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories)
- Steel construction - Hand Made/Welded.

* Steel construction - Hand Made/Welded.

* Can be drilled to accept winch.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Comp-Style SCX10/SCX10 II Front Bumper with Trail Bar - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Comp-Style SCX10/SCX10 II Front Bumper with Trail Bar

Solid, clean, minimal like a wanted.

Much improved approach angle over what I had on there. Looks very clean! Thank you!

Fantastic and low pro

This bumper is perfect if you’re looking for a low pro comp bumper. The quality and price is unmatched in my opinion. I would recommend to anyone. Had to mod mine a bit due to my pan hard mount on my RPRC frame but worked out awesome!

Element RC Enduro Sendero/Sendero HD 1/10 Scale Full-Width Front Bumper

$53.95 USD

Full-size Steel, welded front bumper for the Element Eduro Sendero/Sendero HD.
*Pictures depict optional add-ons

Specifications:
-205mm wide
-Bumper is not made to fit a bumper-mounted winch. This model is built to give the best approach angle possible for this full-size option. Shown with optional front fairlead mount for servo winch.
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Element RC Enduro Sendero/Sendero HD Full-Size Front Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Bumper

Great product! Really happy with how it turned out. Only complaint I have is the left mounting bar was a little heat warped. Mini torch and some pliers fixed the issue! Thanks guys!

Element RC Enduro Sendero/Sendero HD 1/10 Scale Full-Width Front Bumper

Prerunner Series SCX10/SCX10 II XJ Front Bumper

$63.95 USD

Full-size Steel, welded Prerunner Series Front Bumper for the SCX10/ SCX10 2 XJ Body- (Also fits on the Traxxas TRX4 Chassis with the XJ body)

ALSO FITS THE PRO-LINE 4-Runner body WITH the plastic front bumper. If removing plastic front bumper, see the Honcho Raised Prerunner Series bumper and add custom width measurements.

Specifications:
- 200mm wide including wrapped edges
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Prerunner Series SCX10/SCX10 II XJ Front Bumper

Prerunner Series SCX10/SCX10 II XJ Front Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Fit and look great!

Had front and rear made for my proline Nissan. Measured twice since I did custom width. They are perfect.

Great fit!!

Got the bumper in for my trx4 with the injora xj body. This bumper fits perfect! Can slide it in or out to get the right fitment. Ill be back for more! Thanks guys! 5*

Comp-Style SCX10/SCX10 II Front Bumper with Stinger

$48.95 USD

Fits the following bodies, and may fit others (bumper sits even with top of frame rails and offers some fore/aft adjustment):

-Jeep Wrangler
-Pro-Line SR5 (with the stock plastic bumper)
-Pro-Line Jeep Wrangler
-G6/Deadbolt
-CRC Jeep Wrangler Unlimited
-Pro-Line Racing 46 Power Wagon

With over 50 possible combinations on to choose from on this bumper, you can truly build the perfect piece of trail armor for your needs. If you weren't a competitor already, our Comp-Style Front Bumper w/ Stinger will allow you to push the limits of your SCX10/SCX10 2 without having to worry about approach angles.

Drive OVER the rocks, don't work around your bumper!

RC Scale Welded Steel Ultra Low-Profile Comp-Style Front Bumper w/ Stinger for Axial SCX10/SCX10 II Jeep Rubicon, CRC Wrangler Unlimited, Deadbolt/G6, etc.

**If using on the Pro-Line SR5 body, this is made to fit WITH the stock plastic Bumper for a bull-bar look. For a raised bumper that requires trimming of the plastic bumper, please see our other SR5 listings.

Sits even with the top of the frame rails. For RAISED brackets (+20mm above top of frame rails), see our selection HERE

Specifications:

- Finished width 79mm wide (74mm standard scx10 bracket width)
- 20mm deep top plate w/ approx. 12mm of fore/aft adjustment.
- Bumper fits tight to the frame for the best approach angle possible.
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories)
- Steel construction - Hand Made/Welded.
- Can be drilled to accept winch.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Comp-Style SCX10/SCX10 II Front Bumper with Stinger - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Custom

So great to work with. They listened and understood what I was wanting. They communicated through the process. The bumper showed up and was absolutely perfect !! Great company to work with.

Scx10 pro front stinger!

Scaler Fab stinger is more than a bumper it’s a tool for the front of your crawler helps with up and down transitions where normally you would get stuck or flip forward! Perfect fit and craftsmanship bottom line You need this.

Comp bumper

[****] the bumper is what I wanted but one weld was a little sloppy but it looks great

Prerunner Series Vanquish VS4-10 Origin/Pro/Ultra Front Bumper

$73.95 USD

Our most popular series has made it to the Vanquish VS4-10!

The Prerunner series was designed for a combination of looks and performance under scale use. Made from 3/16" rod, the Prerunner Front Bumper for the VS4-10 is a low-profile, scale trail armor option.

Full-size Steel, welded Prerunner Series Front Bumper

for the Vanquish VS4-10 Origin/Pro/Ultra

Specifications:
- Approx. 190mm wide
- Mounts using existing hardware
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: not as susceptible to chips

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Main Pc courtesy of @camazoth on IG. #scalerfab for a feature!

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Prerunner Series Vanquish VS4-10 Front Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Pro Series SCX10/SCX10 II Narrow Raised SR5/Honcho Front Bumper with Trail Bar

$58.95 USD

ScalerFab Welded Steel Pro Series Narrow Raised Front Bumper with Trail Bar for Axial SCX10 Honcho/Pro-Line SR5 Body
(Optional Fairlead Mount Shown)

**Some pictures may depict optional add-ons. Winch not included.

Specifications:
- 115mm wide
- Requires trimming of plastic bumper for Pro-Line SR5 Body
- Laser-cut Gussets added for strength and added scale appearance
- Extra attention to detail during finishing process to optimize performance and appearance.
- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and SSD Ox Power Winch mounting pattern)
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories)
-Gussets added for strength and added scale appearance
- Steel construction - Hand Made/Welded.
- Has slots for adjustable fore/aft mounting

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Main pic courtesy of __pistol_pete__ on IG. #scalerfab for a feature!

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Pro Series SCX10/SCX10 II Narrow Raised SR5/Honcho Front Bumper with Trail Bar - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Pro Series Full-Width Front Bumper w/ Trail Bar for Traxxas TRX4 1970's Series (K5 Blazer, K10, F150)

$68.95 USD

ScalerFab Pro Series Full-Size Front Bumper with Trail Bar for Traxxas TRX4 Blazer

**Some pictures may depict optional add-ons.

Grab the pro series look for your Traxxas TRX4 Blazer/K10/F150 with this full-width front bumper with an added Trail Bar by ScalerFab for extra defense against the toughest obstacles! It offers a full-width 1/10 scale construction with gussets for strength and authentic scale style.

Specifications:
- 205m- Has slots for adjustable fore/aft mountingm wide depending on body style
- Laser-cut Gussets added for strength and added scale appearance
- Extra attention to detail during finishing process to optimize performance and appearance.
- Mounts using existing holes in frame. Does not mount like stock bumper. Longer hardware recommended. (hardware not included)
- Includes Pre-drilled mounting holes for winch. Requires spacers to raise winch and clear the pro series gussets (not included) Mounting Hole pattern fits RC4WD WARN 9.5cti and 8274 Winch, 3Racing Winch, and SSD Ox Power Winch.
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

Mounting instructions:

We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Pro Series Full-Width Front Bumper w/ Trail Bar for Traxxas TRX4 1970's Series (K5 Blazer, K10, F150)

Pro Series Traxxas TRX4 Blazer Full-Size Front Bumper with Trail Bar - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Awesome bumper!!! Top notch and made to last!

Rc parts

Awsome 👍

Bumper

fits perfect and looks awesome

Pro Series Full-Width Front Bumper w/ Trail Bar for Traxxas TRX4 1970's Series (K5 Blazer, K10, F150)

Incognito Element RC Enduro Sendero/Sendero HD Front Bumper

$53.95 USD

ScalerFab Welded Steel Incognito Element RC Enduro Sendero/Sendero HD Front Bumper

The same approach angle as not running a bumper at all, but with all the protection and scale points of a metal front bumper!

**Some pics depict optional Front Fairlead Mount for reference

Specifications:
- 200mm wide
- Will not fit a bumper-mounted winch (this rig is specifically built for a servo winch)
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories)
- Steel construction - Hand Made/Welded.
- Has slots for adjustable fore/aft mounting

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Incognito Element RC Enduro Sendero/Sendero HD Front Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

RR10 Bomber Front Bumper w/ Stinger

$43.95 USD

Toughen up and go full-throttle with the ScalerFab Bomber Front Bumper. The solid steel construction, backed by a lifetime warranty, means you can go beyond the trail with confidence!

RR10 Bomber Front Bumper w/ Stinger

**Some pictures may depict optional add-ons.

* Mounts using existing holes and hardware (hardware not included). Will need to shave the factory nubs on the stock frame for a flush fit.

* Steel construction - welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

RR10 Bomber Front Bumper w/ Stinger - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Prerunner Element RC Enduro Sendero/Sendero HD Front Bumper

$58.95 USD

ScalerFab Welded Steel Prerunner Series

Element RC Enduro Sendero/Sendero HD Front Bumper

Improved approach angle over stock
***NOTE selecting the shackle mounts option will decrease approach angle and performance, as they will stick out slightly from the front edge of the bumper.