SCX10/SCX10 II Rock Sliders w/ Skid Plates

$54.95 USD

SCX10/ SCX10 2 Rock Sliders w/ Skid Plates
Steel Frame-mounted Rock Sliders w/ Optional Add-Ons

Specifications:
* 155mm-177mm (depending on body/tire size) Custom sizes available- enter in Options
* Mounts using existing holes in frame (hardware not included)
* Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Lifetime Warranty Info

Name: SCX10/SCX10 II Rock Sliders w/ Skid Plates
Brand: ScalerFab
Price: 54.95 USD
Availability: InStock

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

SCX10/SCX10 II Rock Sliders w/ Skid Plates - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

SCX10/SCX10 II Double Bar Rock Sliders w/ Skid Plates

$66.95 USD

SCX10/ SCX10 2 Double Bar Rock Sliders w/ Skid Plates
Steel Frame-mounted Rock Sliders w/ Optional Add-Ons

Specifications:
* 155mm-177mm (depending on body/tire size) Custom sizes available- enter in Options
-*NOTE: 177mm length - Fits 1.9 stock tires on stock wheels, others may not fit.
* Mounts using existing holes in frame (hardware not included)
* Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

SCX10/SCX10 II Double Bar Rock Sliders w/ Skid Plates - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Functional but large welds

Had to file my welds down where the double bars met since the weld puddle was so pronounced. Pretty thick weld, just looked way off and not like photos online. Very tough and functional though. Shipping time was long. 21 days before it it was out for delivery. Messages them a couple time before it shipped and never got a response back so direct communication was non-existant.

Awesome company and product!

Product is awesome! Fits great and made very well. I will be ordering more from them in the future. Made to order and well worth the wait.

SCX10/SCX10 II Double Bar Rock Sliders

$54.95 USD

SCX10/ SCX10 2 Double Bar Rock Sliders
Steel Frame-mounted Double Bar Rock Sliders (shown w/ Optional Add-Ons)

Specifications:
* 155mm-177mm (depending on body/tire size) Custom sizes available- enter in Options
-*NOTE: 177mm length - Fits 1.9 stock tires on stock wheels, others may not fit.
* Built-in front and rear link riser mounts.
* Mounts using existing holes in frame (hardware not included)
* Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

SCX10/SCX10 II Double Bar Rock Sliders - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Comp-Style SCX10/SCX10 II Front Bumper with Trail Bar

$48.95 USD

Fits the following bodies, and may fit others (bumper sits even with top of frame rails and offers some fore/aft adjustment):

-Jeep Wrangler
-Pro-Line SR5 (with the stock plastic bumper)
-Pro-Line Jeep Wrangler
-G6/Deadbolt
-CRC Jeep Wrangler Unlimited
-Pro-Line Racing 46 Power Wagon

With over 50 possible combinations to choose from on this bumper, you can truly build the perfect piece of trail armor for your needs. If you weren't a competitor already, our Comp-Style Front Bumper w/ Trail Bar will allow you to push the limits of your SCX10/SCX10 2 without having to worry about approach angles.

Drive OVER the rocks, don't work around your bumper!

ScalerFab's RC Scale Welded Steel Ultra Low-Profile Comp-Style Front Bumper with Trail Bar for Axial SCX10/SCX10 II Jeep Rubicon, CRC Wrangler Unlimited, Deadbolt/G6, etc.

**If using on the Pro-Line SR5 body, this is made to fit WITH the stock plastic Bumper for a bull-bar look. For a raised bumper that requires trimming of the plastic bumper, please see our other SR5 listings from link below.

*Sits even with the top of the frame rails. For RAISED brackets (+20mm above top of frame rails), see our selection HERE

Specifications:

- Finished width 79mm wide (74mm standard scx10 bracket width)
- 20mm deep top plate w/ approx. 12mm of fore/aft adjustment.
- Bumper fits tight to the frame for the best approach angle possible.
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories)
- Steel construction - Hand Made/Welded.

* Steel construction - Hand Made/Welded.

* Can be drilled to accept winch.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Comp-Style SCX10/SCX10 II Front Bumper with Trail Bar - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Comp-Style SCX10/SCX10 II Front Bumper with Trail Bar

Pro Series SCX10/SCX10 II Narrow Front Bumper with Trail Bar

$58.95 USD

ScalerFab Pro Series Welded Steel Narrow Front Bumper w/ Trail Bar for

Axial SCX10/SCX10 II Jeep Rubicon, CRC Wrangler Unlimited, Deadbolt/G6, etc.

Sits even with the top of the frame rails. For RAISED brackets (+20mm above top of frame rails), see our selection HERE

*Additional Options may be available one our website, www.scalerfab.com

Specifications:

- 115mm wide
- Laser-cut Gussets added for strength and added scale appearance
- Extra attention to detail during finishing process to optimize performance and appearance.
-- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and 8274 Winch, 3Racing Winch, and SSD Ox Power Winch mounting pattern)
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories)
-Gussets added for strength and added scale appearance
- Steel construction - Hand Made/Welded.
- Has slots for adjustable fore/aft mounting

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Pro Series SCX10/SCX10 II Narrow Front Bumper with Trail Bar - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Pro Series SCX10/SCX10 II Narrow Front Bumper with Stinger

$58.95 USD

ScalerFab Comp-Style Pro Series Welded Steel Narrow Front Bumper w/ Stinger for Axial SCX10/SCX10 II Jeep Rubicon, CRC Wrangler Unlimited, Deadbolt/G6, etc.

Sits even with the top of the frame rails. For RAISED brackets (+20mm above top of frame rails), see our selection HERE

*Additional Options may be available one our website, www.scalerfab.com

Specifications:

- 115mm wide
- Laser-cut Gussets added for strength and added scale appearance
- Extra attention to detail during finishing process to optimize performance and appearance.
- Includes Pre-drilled mounting holes for winch(RC4WD WARN 9.5cti and 8274 Winch, 3Racing Winch, and SSD Ox Power Winch mounting pattern)
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories)
-Gussets added for strength and added scale appearance
- Steel construction - Hand Made/Welded.
- Has slots for adjustable fore/aft mounting

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Pro Series SCX10/SCX10 II Narrow Front Bumper with Stinger - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Pro Series Comp-Style SCX10/SCX10 II Front Bumper with Trail Bar

$68.95 USD

ScalerFab Comp-Style Pro Series Welded Steel Narrow Front Bumper w/ Trail Bar for Axial SCX10/SCX10 II Jeep Rubicon, CRC Wrangler Unlimited, Deadbolt/G6, etc.

Bumper fits tight to the frame for the best approach angle possible and will not work with a bumper-mounted winch.

Sits even with the top of the frame rails. For RAISED brackets (+20mm above top of frame rails), see our selection HERE

Specifications:

- 76mm wide
- 20mm deep top plate w/ approx. 12mm of fore/aft adjustment.
- Bumper fits tight to the frame for the best approach angle possible. There is no room to mount a winch due to the Pro Series Gussets.
- Laser-cut Gussets added for strength and added scale appearance
- Extra attention to detail during finishing process to optimize performance and appearance.
- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories)

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Pro Series Comp-Style SCX10/SCX10 II Front Bumper with Trail Bar - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Pro Series Comp-Style SCX10/SCX10 II Front Bumper with Stinger