Vanquish VS4-10 Pro/Ultra Roll Bar

$40.00 USD

This is the brand new, just released ScalerFab Roll Bar for the Vanquish VS4-10 Pro/Ultra Origin Truck. Simple, yet strong and full of SCALE!

Vanquish VS4-10 Pro/Ultra Roll Bar

Specifications:
**Some Pictures Depict Optional Add-Ons

-Approx. 70mm tall x 185mm wide
-Hand-welded steel 3/16 rod
-Mounts by drilling 4 holes into truck bed, hardware not included. (*Requires four (4) 3mm x 8mm screws w/ nuts.)

Lifetime Warranty Info

Name: Vanquish VS4-10 Pro/Ultra Roll Bar
Brand: ScalerFab
Price: 40.0 USD
Availability: InStock

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Vanquish VS4-10 Origin/Pro/Ultra 1/10 Scale Full-Width Front Bumper

$53.95 USD

Full-size Steel, welded front bumper for the Vanquish VS4-10 Origin/Ultra/Pro

*Pictures may depict optional add-ons

Trail Bar or Stinger Option Available Upon Request- (+$5). Email orders@scalerfab.com after placing order to add option.

Specifications:
- Includes Pre-drilled mounting holes for winch (RC4WD WARN 9.5cti and SSD Ox Power Winch mounting pattern)
- Mounts using existing hardware
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Vanquish VS4-10 Full-Size Front Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Vanquish VS4-10 Origin/Pro/Ultra Rear Bumper

$53.95 USD

ScalerFab Welded Steel Rear Bumper for the Vanquish VS4-10 Origin/Pro/Ultra

Transform your vehicle with the Vanquish VS4-10 Rear Bumper! Experience added strength and a more realistic scale appearance with scalerfab technology. Upgrade your scale game and conquer the challenges ahead!

Specifications:-
- Adjustable mounting positions/depths - allows for better departure angle.
- Mounts using existing holes in frame - (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Vanquish VS4-10 Origin/Pro/Ultra Rear Bumper

Vanquish VS4-10 Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Worth The Wait!

The finish and fitment is excellent. Installation was easy, both front and rear bumpers look great on my rig and add some weight/rigidity at the ends of the frame. Super stoked to get out on the rocks and show just how good they really are.

Retro Series Vanquish VS4-10 Origin/Pro/Ultra Rear Bumper

$59.95 USD

A Brand New Series- The Retro Series features double tube work for that classic, old-school look! Pairs perfectly with the Retro Series Front Bumper HERE

ScalerFab Welded Steel Prerunner Series Rear Bumper for Vanquish VS4-10 Origin/Ultra/Pro

Specifications:-
- Adjustable mounting positions/depths - allows for better departure angle.
- Mounts using existing holes in frame- (hardware not included)
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Retro Series Vanquish VS4-10 Rear Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Retro Series Vanquish VS4-10 Origin/Pro/Ultra Front Bumper

$73.95 USD

The Retro Series features double tube work for that classic, old-school look! Pairs perfectly with the Retro Series Rear Bumper HERE.

Full-size Steel, welded Retro Series Front Bumper for the Vanquish VS4-10 Origin//Pro/Ultra!

Specifications:
- Approx. 190mm wide
- Mounts using existing hardware
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: not as susceptible to chips

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Retro Series Vanquish VS4-10 Front Bumper - scalerfab-r-c-trail-armor-accessories scale rc crawler truck hobby

Prerunner Series Vanquish VS4-10 Origin/Pro/Ultra Front Bumper

$73.95 USD

Our most popular series has made it to the Vanquish VS4-10!

The Prerunner series was designed for a combination of looks and performance under scale use. Made from 3/16" rod, the Prerunner Front Bumper for the VS4-10 is a low-profile, scale trail armor option.

Full-size Steel, welded Prerunner Series Front Bumper

for the Vanquish VS4-10 Origin/Pro/Ultra

Specifications:
- Approx. 190mm wide
- Mounts using existing hardware
- Steel construction - Hand Made/Welded.

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: not as susceptible to chips

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.

Main Pc courtesy of @camazoth on IG. #scalerfab for a feature!

Lifetime Warranty Info

ScalerFab Offers a Lifetime Warranty on all of our Trail Armor. We warranty against breakage and bending of non-modified Bumpers, Rock Sliders, Roof Racks, Hitches, etc.

If you have an issue with your item, please leave detailed info below or you can mail in with info.

Items for warranty repair/replacement can should be mailed to:

ScalerFab, Inc
PO Box 130
Divide, CO 80814

Replacement and/or refunds typically processed within 5-7 business days upon receipt of item. (Management reserves all rights)

Eligible for Gift Cert Redemption

Lifetime Warranty Info

Customer Reviews

Lifetime Warranty Info

Customer Reviews

ScalerFab Welded Steel Rear Bumper for the Vanquish VS4-10 Origin/Pro/Ultra

Transform your vehicle with the Vanquish VS4-10 Rear Bumper! Experience added strength and a more realistic scale appearance with scalerfab technology. Upgrade your scale game and conquer the challenges ahead!

Lifetime Warranty Info

Customer Reviews

Lifetime Warranty Info

Lifetime Warranty Info

Lifetime Warranty Info

Customer Reviews

Promos

DIY Bungee Cord Tutorial

Collaborate with Us!